mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Mathias Nyman <mathias.nyman@intel.com>,
	Chen-Yu Tsai <wenst@chromium.org>,  Rob Herring <robh@kernel.org>,
	Arun Iyengar <aiyengar1990@gmail.com>
Subject: [PATCH v6 0/3] usb: core: Pair ports of different host controllers through their connector
Date: Thu, 19 Nov 2026 10:03:22 +0000	[thread overview]
Message-ID: <20261119-usb-port-pairing-v6-0-32bd7e36e426@gmail.com> (raw)

On the RK3588, the USB 2.0 lines of the USB 3.0 host 2 connector go to
a separate EHCI, so the USB core pairs its SuperSpeed port with the
wrong USB 2.0 port, and a USB 3 device present at boot stays at 480 Mb/s.

Patch 1 pairs the ports through their usb-connector. Patch 2 fixes the
connect_type of a dwc3 SuperSpeed port with a USB 2.0 device node. Patch
3 resets the USB 2.0 port of such a device once, so that it retries
SuperSpeed. The Orange Pi 5 DT follows separately and needs Chen-Yu
Tsai's usb-hcd binding [1].

Tested on an Orange Pi 5 (7.3-based kernel with KASAN): a USB 3 disk
that enumerated on the USB 2.0 port moved to 5 Gb/s in 3/3 boots, 6/6
xHCI rebinds and 2/2 runtime-suspended resets. With DT overlays: ports
whose connector peer is not a USB node are paired by default, and a
SuperSpeed port shaped like the lckfb one reads hotplug. Not tested with
an external USB 3 hub; a device that stays at high speed was tested on
v5 only.

Developed with Claude (Anthropic), which wrote the code and the commit
messages. I reviewed every change.

[1] https://lore.kernel.org/all/20261014082037.1774672-2-wenst@chromium.org/

---
Changes in v6:
- Patch 1: take a connector peer only if it is or is under a "usb" node
  (Sashiko)
- Patch 1: connector_peer as a :1 bitfield, set before the port is
  registered (Alan Stern, Sashiko)
- New patch 2: dwc3 SuperSpeed port connect_type from the graph first (Sashiko)
- Link to v5: https://patch.msgid.link/20261118-usb-port-pairing-v5-0-5f1a26789270@gmail.com

---
Arun Iyengar (3):
      usb: core: Pair ports of different hubs through their connector
      usb: core: Prefer the graph for a dwc3 SuperSpeed port's connect_type
      usb: hub: Retry SuperSpeed for a device stuck on its USB 2.0 peer

 drivers/usb/core/hub.c  | 158 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/core/hub.h  |   5 ++
 drivers/usb/core/of.c   | 148 ++++++++++++++++++++++++++++++++++++++++-----
 drivers/usb/core/port.c |  89 ++++++++++++++++++++++++---
 include/linux/usb/of.h  |  13 ++++
 5 files changed, 390 insertions(+), 23 deletions(-)
---
base-commit: f11fe7603df07fbb9fa02b0d385c1696c87a6dab
change-id: 20261110-usb-port-pairing-af0f66f0ab2e

Best regards,
--  
Arun Iyengar <aiyengar1990@gmail.com>



             reply	other threads:[~2026-11-19 10:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 10:03 Arun Iyengar via B4 Relay [this message]
2026-11-19 10:03 ` [PATCH v6 1/3] usb: core: Pair ports of different hubs " Arun Iyengar via B4 Relay
2026-11-19 10:03 ` [PATCH v6 2/3] usb: core: Prefer the graph for a dwc3 SuperSpeed port's connect_type Arun Iyengar via B4 Relay
2026-11-19 10:03 ` [PATCH v6 3/3] usb: hub: Retry SuperSpeed for a device stuck on its USB 2.0 peer Arun Iyengar via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119-usb-port-pairing-v6-0-32bd7e36e426@gmail.com \
    --to=devnull+aiyengar1990.gmail.com@kernel.org \
    --cc=aiyengar1990@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=robh@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®