mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
To: Michal Simek <michal.simek@amd.com>
Cc: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <git@amd.com>,
	<amitrkcian2002@gmail.com>,
	Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Subject: [PATCH v2] arm64: versal-net: Add SysMon and thermal zone
Date: Thu, 19 Nov 2026 11:14:18 +0530	[thread overview]
Message-ID: <20261119054418.3740755-1-amit.kumar-mahapatra@amd.com> (raw)

Describe the System Monitor (SysMon) block in the PMC, which provides
on-chip voltage and temperature monitoring, and use its device
temperature channel as the sensor for a thermal zone.

SysMon channel 0 is the current maximum temperature across all active
satellites.

The thermal zone has a critical trip at 125C. Passive trips and cooling
maps, voltage channels and per-satellite temperature channels depend on
the design and are left to board files.

SysMon availability depends on the design configuration, and it may not
be accessible over MMIO, so the SysMon node is disabled by default.
Boards that use it enable it.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
---
Changes in v2:
- Split out of the versal-sysmon series and sent separately, as there
  is no dependency on it (Michal).
- Add status = "disabled" to the sysmon0 node (Michal).

v1: https://lore.kernel.org/all/20261102122112.1723130-6-amit.kumar-mahapatra@amd.com/

 arch/arm64/boot/dts/xilinx/versal-net.dtsi | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/versal-net.dtsi b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
index 9b74e59fd64a..fd976a577b18 100644
--- a/arch/arm64/boot/dts/xilinx/versal-net.dtsi
+++ b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
@@ -706,6 +706,28 @@ versal_fpga: versal-fpga {
 		compatible = "xlnx,versal-fpga";
 	};
 
+	sysmon_temp: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&sysmon0 0>;
+		io-channel-names = "sensor-channel";
+	};
+
+	thermal-zones {
+		versal_thermal: versal-thermal {
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&sysmon_temp>;
+
+			trips {
+				ot_crit: ot-crit {
+					temperature = <125000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	amba: axi {
 		compatible = "simple-bus";
 		bootph-all;
@@ -1004,6 +1026,14 @@ spi1: spi@f1970000 {
 			clock-names = "ref_clk", "pclk";
 		};
 
+		sysmon0: sysmon@f1270000 {
+			compatible = "xlnx,versal-sysmon";
+			status = "disabled";
+			reg = <0 0xf1270000 0 0x4000>;
+			interrupts = <0 202 4>;
+			#io-channel-cells = <1>;
+		};
+
 		ttc0: timer@f1dc0000 {
 			compatible = "cdns,ttc";
 			status = "disabled";
-- 
2.44.4


                 reply	other threads:[~2026-11-19  5:44 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119054418.3740755-1-amit.kumar-mahapatra@amd.com \
    --to=amit.kumar-mahapatra@amd.com \
    --cc=amitrkcian2002@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=git@amd.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®