From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Hyunjung Ko <hj351016@gmail.com>
Cc: Guido Kiener <guido@kiener-muenchen.de>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH] usb: usbtmc: reject a short READ_STATUS_BYTE control transfer
Date: Thu, 19 Nov 2026 14:13:16 +0100 [thread overview]
Message-ID: <2026111913-hulk-attempt-905f@gregkh> (raw)
In-Reply-To: <20261119083959.1599898-1-hj351016@gmail.com>
On Thu, Nov 19, 2026 at 05:39:59PM +0900, Hyunjung Ko wrote:
> usbtmc_get_stb() asks the device for three bytes of the READ_STATUS_BYTE
> response into a kmalloc()'d buffer and only checks that usb_control_msg()
> did not fail:
>
> buffer = kmalloc(8, GFP_KERNEL);
> ...
> rv = usb_control_msg(..., buffer, 0x03, USB_CTRL_GET_TIMEOUT);
> if (rv < 0)
> goto exit;
>
> usb_control_msg() returns the number of bytes actually transferred,
> which a device is free to make shorter than the three that were
> requested. When the interface has no interrupt-in endpoint the status
> byte is then taken straight from the third byte:
>
> *stb = buffer[2];
>
> and the caller hands it to user space with put_user() from
> USBTMC488_IOCTL_READ_STB and USBTMC_IOCTL_GET_SRQ_STB. A device that
> answers with one or two bytes - with the first byte set to
> USBTMC_STATUS_SUCCESS so the status check passes - therefore leaks one
> byte of uninitialised kmalloc memory to user space. Both conditions are
> under the device's control, since it also decides whether to expose an
> interrupt-in endpoint.
>
> The same leak was fixed once before in this driver: usbtmc_ioctl_request()
> bounds its copy_to_user() to the number of bytes usb_control_msg() reported
> instead of the number requested. usbtmc_get_stb() cannot be fixed that way
> because it reads a fixed offset, so reject the transfer unless all three
> bytes arrived, matching what usbtmc488_ioctl_simple() already does for its
> own one-byte request.
>
> The check is not limited to the branch that reads buffer[2]: buffer[0] is
> consumed on both paths, so a short response leaves the status check itself
> reading uninitialised memory. USBTMC-USB488 4.3.1 requires the three-byte
> response, so a device that sends fewer is not conforming either way.
>
> Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
> Cc: stable@vger.kernel.org
This is a "fun" one in that LLMs keep tripping over it, and they
generate a patch that is usually wrong, like this one.
Be very careful here, and test your changes with a real device please.
thanks,
greg k-h
next prev parent reply other threads:[~2026-11-19 13:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 8:39 Hyunjung Ko
2026-11-19 13:13 ` Greg Kroah-Hartman [this message]
2026-11-19 13:25 ` khj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026111913-hulk-attempt-905f@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=guido@kiener-muenchen.de \
--cc=hj351016@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®