On Fri, Nov 20, 2026 at 02:27:02PM +0200, Matti Vaittinen wrote: > From: Matti Vaittinen > > ROHM BD79111 is very similar to the BD79112. Both are ADC/GPIO devices, > where pins can be configured to be either used as GPIO or ADC inputs. > ADCs are 12-bit SAR ADCs and GPIOs support input/output but not being IRQ > sources. > > The main difference is amount of channels/GPIOs. The BD79112 has 32 pins > for this use, the BD79111 has 16. Furthermore, the BD79111 data-sheet > promises 0.5 MSPS sample rate with maximum of 10 MHz SPI clock, whereas > the BD79112 data-sheet mentioned 1MSPS rate with maximum of 20 MHz SPI > clock. > > Signed-off-by: Matti Vaittinen > > --- > Revision history: > v1 => v2: > Disallow additional properties again Acked-by: Conor Dooley pw-bot: not-applicable fyi, changelog isnt quite right, but in this case I don't actually need it so it is moot.