From: Zhan Xusheng <zhanxusheng1024@gmail.com>
To: vbabka@kernel.org, harry@kernel.org
Cc: urezki@gmail.com, paulmck@kernel.org, qiang.zhang@linux.dev,
akpm@linux-foundation.org, hao.li@linux.dev, cl@gentwo.org,
rientjes@google.com, roman.gushchin@linux.dev,
linux-mm@kvack.org, rcu@vger.kernel.org,
linux-kernel@vger.kernel.org, zhanxusheng@xiaomi.com,
stable@vger.kernel.org
Subject: [PATCH v2 2/2] mm/slab: don't queue the page cache work under krcp->lock
Date: Fri, 20 Nov 2026 16:37:07 +0800 [thread overview]
Message-ID: <20261120083707.296481-2-zhanxusheng1024@gmail.com> (raw)
In-Reply-To: <20261120083707.296481-1-zhanxusheng1024@gmail.com>
From: Zhan Xusheng <zhanxusheng@xiaomi.com>
Commit 56292e8609e3 ("rcu/tree: Defer kvfree_rcu() allocation to a
clean context") deferred page allocations to a workqueue. To avoid
deadlocks with the scheduler, it used hrtimer to queue the work instead
of queueing it directly.
Commit d0bfa8b3c411 ("kvfree_rcu: Release a page cache under memory
pressure") later added a backoff mechanism under memory pressure, but
did not consider that queue_delayed_work() with delay = 0 immediately
queues the work and introduced the deadlock commit 56292e8609e3 tried to
avoid.
run_page_cache_worker() runs under krcp->lock, from kvfree_call_rcu()
callers that may hold more, such as set_cpus_allowed_force() under
pi_lock, so it kicks the refill work from an hrtimer. Under memory
pressure it instead queues the work with a delay of
rcutree.rcu_delay_page_cache_fill_msec, which may be 0, and a zero delay
queues it at once, taking pool->lock under krcp->lock.
With the delay set to 0, calling kvfree_rcu() on vmalloc memory under
pi_lock after a drop_caches makes lockdep report:
Chain exists of:
&pool->lock --> &p->pi_lock --> krc.lock
A zero delay also defeats the backoff, which is there to defer the
refill under memory pressure. Clamp the delay to [1:100000] ms, so that
queue_delayed_work() always arms a timer, and update the documented
range.
Fixes: d0bfa8b3c411 ("kvfree_rcu: Release a page cache under memory pressure")
Cc: stable@vger.kernel.org
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
---
v2: clamp the delay to [1:100000] ms instead of using the hrtimer for a
zero delay (Uladzislau). The changelog is Harry's version from
slab/for-next-fixes, with the last paragraph rewritten. The
Reviewed-by tags of Vlastimil and Hao on v1 are not carried over, as
the code changed.
Tested in a VM on v7.4-rc1 with lockdep: with
rcutree.rcu_delay_page_cache_fill_msec=0, patch 1 alone reports the
circular dependency above; with this patch the boot log says "Adjusting
rcutree.rcu_delay_page_cache_fill_msec to 1 ms." and lockdep stays
quiet.
v1: https://lore.kernel.org/all/20261028134647.3176080-1-zhanxusheng1024@gmail.com/
Documentation/admin-guide/kernel-parameters.txt | 2 +-
mm/slab_common.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 0b3c140babd9..0d1d76a6af70 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5763,7 +5763,7 @@ Kernel parameters
rcutree.rcu_delay_page_cache_fill_msec= [KNL]
Set the page-cache refill delay (in milliseconds)
in response to low-memory conditions. The range
- of permitted values is in the range 0:100000.
+ of permitted values is in the range 1:100000.
rcutree.rcu_divisor= [KNL]
Set the shift-right count to use to compute
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 41dea01a8c1f..6fb453118641 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -2262,12 +2262,12 @@ void __init kvfree_rcu_init(void)
WQ_UNBOUND | WQ_MEM_RECLAIM, 0);
WARN_ON(!rcu_reclaim_wq);
- /* Clamp it to [0:100] seconds interval. */
- if (rcu_delay_page_cache_fill_msec < 0 ||
+ /* Clamp it to [1:100000] milliseconds interval. */
+ if (rcu_delay_page_cache_fill_msec < 1 ||
rcu_delay_page_cache_fill_msec > 100 * MSEC_PER_SEC) {
rcu_delay_page_cache_fill_msec =
- clamp(rcu_delay_page_cache_fill_msec, 0,
+ clamp(rcu_delay_page_cache_fill_msec, 1,
(int) (100 * MSEC_PER_SEC));
pr_info("Adjusting rcutree.rcu_delay_page_cache_fill_msec to %d ms.\n",
--
2.43.0
prev parent reply other threads:[~2026-11-20 8:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 8:37 [PATCH v2 1/2] mm/slab: restore the rcutree. prefix of the kvfree_rcu parameters Zhan Xusheng
2026-11-20 8:37 ` Zhan Xusheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120083707.296481-2-zhanxusheng1024@gmail.com \
--to=zhanxusheng1024@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=cl@gentwo.org \
--cc=hao.li@linux.dev \
--cc=harry@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=paulmck@kernel.org \
--cc=qiang.zhang@linux.dev \
--cc=rcu@vger.kernel.org \
--cc=rientjes@google.com \
--cc=roman.gushchin@linux.dev \
--cc=stable@vger.kernel.org \
--cc=urezki@gmail.com \
--cc=vbabka@kernel.org \
--cc=zhanxusheng@xiaomi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®