mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Muchun Song <songmuchun@bytedance.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	David Hildenbrand <david@kernel.org>,
	Oscar Salvador <osalvador@suse.de>,
	Mike Rapoport <rppt@kernel.org>
Cc: "Liam R . Howlett" <liam@infradead.org>,
	Vlastimil Babka <vbabka@kernel.org>,
	Michal Hocko <mhocko@suse.com>,
	Muchun Song <muchun.song@linux.dev>,
	Li Zhe <lizhe.67@bytedance.com>,
	Andrew Popple <apopple@nvidia.com>,
	Balbir Singh <balbirs@nvidia.com>,
	Lorenzo Stoakes <ljs@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	James Houghton <jthoughton@google.com>,
	Lance Yang <lance.yang@linux.dev>, Qi Zheng <qi.zheng@linux.dev>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Muchun Song <songmuchun@bytedance.com>
Subject: [PATCH v3 00/11] mm: Unify memmap initialization for compound pages
Date: Fri, 20 Nov 2026 18:08:45 +0800	[thread overview]
Message-ID: <20261120100856.16929-1-songmuchun@bytedance.com> (raw)

Hi,

This v3 is based on the mm-new branch at commit 15f114dac9a7.

This series is split out from the earlier, larger series
"mm: Generalize HVO for HugeTLB and device DAX" [1]. That series
generalized vmemmap optimization across HugeTLB and device DAX. One
remaining piece is the separate compound struct page initialization used
by boot-time gigantic HugeTLB pages and compound ZONE_DEVICE ranges.

In v3, Li Zhe's template-copy work is integrated directly into the
generic compound-page initialization changes instead of being stacked as
two prerequisite patches. The shared memmap_init_compound_page() helper
now covers both compound ZONE_DEVICE ranges and boot-time gigantic
HugeTLB folios. ZONE_DEVICE retains memcpy_nontemporal(), while normal
memory uses memcpy().

The first four patches make the generic memmap initialization code
suitable for sharing. They add zone-consistency verification, factor the
PFN-independent page state, simplify ZONE_DEVICE template setup, and
introduce the common compound-page initialization helper.

The next four patches remove the boot-time HugeTLB HVO special handling,
initialize all bootmem hugepage struct pages in one place, switch HugeTLB
to the common helper, and make the now-local page initializer static.

The final three patches centralize early CMA pageblock setup and move
MIGRATE_MOVABLE pageblock initialization into the shared memmap helpers.

After this series, boot-time HugeTLB and compound ZONE_DEVICE ranges,
including device DAX, use the same helpers for compound-page and
pageblock initialization.

[1] https://lore.kernel.org/20260513130542.35604-1-songmuchun@bytedance.com/
[2] https://lore.kernel.org/20261112112816.55095-1-lizhe.67@bytedance.com/

v3:
- Integrate Li Zhe's template-copy work into the common compound-page
  helper and drop the standalone prerequisite patches (suggested by Mike
  Rapoport)
- Apply the helper naming cleanups and remove duplicate ZONE_DEVICE
  reserved-page initialization (suggested by Mike Rapoport)
- Update the HugeTLB performance results for the integrated
  implementation (measured by Li Zhe)
- Restore managed-page accounting after CMA activation failure
  (reported by Sashiko)
- Correct [2] to refer to Li Zhe's v3 (reported by Lance Yang)
- Collect Reviewed-by from Lance Yang

v2: https://lore.kernel.org/20261113033442.62970-1-songmuchun@bytedance.com/
- Fold in Li Zhe's memmap template helper series, based on its v2 [2].
- Remove __meminit from memmap_init_page_common().
- Add a cleanup to make memmap_init_page_from_template() static.
- Collect Reviewed-by from Mike Rapoport.
- Fix the helper name in the final commit message.

v1: https://lore.kernel.org/20261109095807.41547-1-songmuchun@bytedance.com/

Muchun Song (11):
  mm/mm_init: verify zones for template-initialized pages
  mm/mm_init: factor out common struct page initialization
  mm/mm_init: simplify zone device page initialization
  mm/mm_init: factor out compound page initialization
  mm/hugetlb: drop boot-time HVO handling for gigantic folios
  mm/hugetlb: initialize all struct pages for bootmem hugepages
  mm/hugetlb: use common compound page initialization helper
  mm/mm_init: make __init_single_page() static
  mm/cma: centralize CMA pageblock initialization
  mm/cma: localize init_cma_pageblock() to cma.c
  mm/mm_init: move pageblock migratetype init to memmap helpers

 include/linux/mm.h   |   8 --
 mm/cma.c             |  38 +++++--
 mm/hugetlb.c         | 111 ++----------------
 mm/hugetlb_vmemmap.c |  19 +---
 mm/mm_init.c         | 261 +++++++++++++++++--------------------------
 mm/mm_init.h         |  13 +--
 mm/sparse-vmemmap.c  |   7 +-
 7 files changed, 140 insertions(+), 317 deletions(-)


base-commit: 15f114dac9a7bde1796f0e54e22726fd31cfa8a5
-- 
2.54.0


             reply	other threads:[~2026-11-20 10:09 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 10:08 Muchun Song [this message]
2026-11-20 10:08 ` [PATCH v3 01/11] mm/mm_init: verify zones for template-initialized pages Muchun Song
2026-11-20 10:08 ` [PATCH v3 02/11] mm/mm_init: factor out common struct page initialization Muchun Song
2026-11-20 10:08 ` [PATCH v3 03/11] mm/mm_init: simplify zone device " Muchun Song
2026-11-20 10:08 ` [PATCH v3 04/11] mm/mm_init: factor out compound " Muchun Song
2026-11-20 10:08 ` [PATCH v3 05/11] mm/hugetlb: drop boot-time HVO handling for gigantic folios Muchun Song
2026-11-20 10:08 ` [PATCH v3 06/11] mm/hugetlb: initialize all struct pages for bootmem hugepages Muchun Song
2026-11-20 10:08 ` [PATCH v3 07/11] mm/hugetlb: use common compound page initialization helper Muchun Song
2026-11-20 10:08 ` [PATCH v3 08/11] mm/mm_init: make __init_single_page() static Muchun Song
2026-11-20 10:08 ` [PATCH v3 09/11] mm/cma: centralize CMA pageblock initialization Muchun Song
2026-11-20 10:08 ` [PATCH v3 10/11] mm/cma: localize init_cma_pageblock() to cma.c Muchun Song
2026-11-20 10:08 ` [PATCH v3 11/11] mm/mm_init: move pageblock migratetype init to memmap helpers Muchun Song

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120100856.16929-1-songmuchun@bytedance.com \
    --to=songmuchun@bytedance.com \
    --cc=akpm@linux-foundation.org \
    --cc=apopple@nvidia.com \
    --cc=balbirs@nvidia.com \
    --cc=david@kernel.org \
    --cc=jthoughton@google.com \
    --cc=lance.yang@linux.dev \
    --cc=liam@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lizhe.67@bytedance.com \
    --cc=ljs@kernel.org \
    --cc=mhocko@suse.com \
    --cc=muchun.song@linux.dev \
    --cc=osalvador@suse.de \
    --cc=qi.zheng@linux.dev \
    --cc=rppt@kernel.org \
    --cc=surenb@google.com \
    --cc=vbabka@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®