mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: broonie@kernel.org
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@opensource.cirrus.com
Subject: [PATCH 4/4] ASoC: cs35l56: Add test that probe() doesn't write SDW mux registers
Date: Fri, 20 Nov 2026 11:04:41 +0000	[thread overview]
Message-ID: <20261120110441.2163567-5-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20261120110441.2163567-1-rf@opensource.cirrus.com>

The driver cannot assume that it owns control of the
CS35L56_SWIRE_DP3_CH?_INPUT registers so it must not do anything
during probe() or component_probe() that could result in a write
to these registers. Add a test case for this.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 sound/soc/codecs/cs35l56-test.c | 84 +++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

diff --git a/sound/soc/codecs/cs35l56-test.c b/sound/soc/codecs/cs35l56-test.c
index b422d19ba0b2..362da30b949e 100644
--- a/sound/soc/codecs/cs35l56-test.c
+++ b/sound/soc/codecs/cs35l56-test.c
@@ -63,6 +63,7 @@ struct cs35l56_test_priv {
 
 	bool asp_config_regs_written;
 	bool asp_mixer_regs_written;
+	bool sdw_mux_regs_written;
 };
 
 struct cs35l56_test_param {
@@ -124,6 +125,11 @@ static const struct range cs35l56_test_asp_mixer_registers_range = {
 	.end = CS35L56_ASP1TX4_INPUT,
 };
 
+static const struct range cs35l56_test_sdw_mux_registers_range = {
+	.start = CS35L56_SWIRE_DP3_CH1_INPUT,
+	.end = CS35L56_SWIRE_DP3_CH4_INPUT,
+};
+
 static int cs35l56_test_mock_registers_read(void *context,
 					    const void *reg_buf, size_t reg_size,
 					    void *val_buf, size_t val_size)
@@ -200,6 +206,9 @@ static int cs35l56_test_mock_registers_write(void *context, const void *data, si
 	if (range_overlaps(&addr_range, &cs35l56_test_asp_mixer_registers_range))
 		priv->asp_mixer_regs_written = true;
 
+	if (range_overlaps(&addr_range, &cs35l56_test_sdw_mux_registers_range))
+		priv->sdw_mux_regs_written = true;
+
 	for (i = 0; i < count; i += sizeof(u32)) {
 		val = get_unaligned_be32(buf + i);
 		ret = regmap_write(priv->registers, reg + i, val);
@@ -929,6 +938,79 @@ static void cs35l56_test_component_probe_omits_asp(struct kunit *test)
 	KUNIT_EXPECT_FALSE(test, priv->asp_mixer_regs_written);
 }
 
+/*
+ * Probing the component must not write the SoundWire TX mux registers,
+ * either directly or through a subsequent regcache_sync().
+ */
+static void cs35l56_test_component_probe_omits_sdw_mux(struct kunit *test)
+{
+	struct cs35l56_test_priv *priv = test->priv;
+	struct cs35l56_private *cs35l56 = priv->cs35l56_priv;
+	struct snd_soc_card *card = cs35l56->component->card;
+	struct snd_soc_aux_dev *aux;
+	struct faux_device *card_dev;
+
+	cs35l56_test_create_mock_supplies(test);
+	cs35l56_test_create_mock_device_registers(test);
+
+	KUNIT_ASSERT_NOT_NULL(test, priv->regmap_config);
+	cs35l56->base.regmap = devm_regmap_init(cs35l56->base.dev,
+						&cs35l56_test_mock_registers_client_regmap_bus,
+						test, priv->regmap_config);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, cs35l56->base.regmap);
+
+	KUNIT_ASSERT_EQ(test, 0, cs35l56_common_probe(cs35l56, 0));
+	KUNIT_ASSERT_EQ(test, 0,
+			kunit_add_action_or_reset(test, cs35l56_remove_wrapper, cs35l56));
+
+	/* Prevent real dsp_work */
+	INIT_WORK(&cs35l56->dsp_work, cs35l56_test_dummy_dsp_work);
+
+	/* Simulate first attachment and re-attachment after the soft reset. */
+	regcache_cache_only(cs35l56->base.regmap, false);
+	KUNIT_ASSERT_EQ(test, 0, cs35l56_init(cs35l56));
+	KUNIT_ASSERT_EQ(test, 0, cs35l56_init(cs35l56));
+	KUNIT_ASSERT_TRUE(test, cs35l56->base.init_done);
+	flush_work(&cs35l56->component_register_work);
+	KUNIT_ASSERT_TRUE(test, cs35l56->component_registered);
+
+	card_dev = faux_device_create("cs35l56_test_card", NULL, NULL);
+	KUNIT_ASSERT_NOT_NULL(test, card_dev);
+	KUNIT_ASSERT_EQ(test, 0,
+			kunit_add_action_or_reset(test, faux_device_destroy_wrapper, card_dev));
+
+	/* Bind as an auxiliary component so the ASP DAI is never probed. */
+	aux = kunit_kzalloc(test, sizeof(*aux), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_NULL(test, aux);
+	aux->dlc.name = dev_name(cs35l56->base.dev);
+	card->name = "cs35l56-test";
+	card->dev = &card_dev->dev;
+	card->owner = THIS_MODULE;
+	card->aux_dev = aux;
+	card->num_aux_devs = 1;
+	KUNIT_ASSERT_EQ(test, 0, snd_soc_register_card(card));
+	KUNIT_ASSERT_EQ(test, 0,
+			kunit_add_action_or_reset(test, snd_soc_unregister_card_wrapper, card));
+	KUNIT_ASSERT_TRUE(test, card->instantiated);
+	KUNIT_EXPECT_FALSE(test, priv->sdw_mux_regs_written);
+
+	/*
+	 * Flush cache to ensure there aren't cached values for the SoundWire muxes.
+	 * The first case without regcache_mark_dirty() tests flushing when
+	 * hardware registers have not reset, and requires a dummy write to
+	 * the cache to make it dirty.
+	 */
+	regcache_cache_only(cs35l56->base.regmap, true);
+	KUNIT_ASSERT_EQ(test, 0, regmap_write(cs35l56->base.regmap,
+					      CS35L56_DSP_VIRTUAL1_MBOX_1, 0));
+	regcache_cache_only(cs35l56->base.regmap, false);
+	KUNIT_ASSERT_EQ(test, 0, regcache_sync(cs35l56->base.regmap));
+	regcache_mark_dirty(cs35l56->base.regmap);
+	KUNIT_ASSERT_EQ(test, 0, regcache_sync(cs35l56->base.regmap));
+
+	KUNIT_EXPECT_FALSE(test, priv->sdw_mux_regs_written);
+}
+
 static int cs35l56_test_case_init_common(struct kunit *test)
 {
 	struct cs35l56_test_priv *priv;
@@ -1233,6 +1315,8 @@ static struct kunit_case cs35l56_test_cases_soundwire[] = {
 	KUNIT_CASE(cs35l56_test_set_fw_name_preserves_spkid_without_onchip_gpios),
 	KUNIT_CASE_PARAM(cs35l56_test_component_probe_omits_asp,
 			 cs35l56_test_type_rev_all_gen_params),
+	KUNIT_CASE_PARAM(cs35l56_test_component_probe_omits_sdw_mux,
+			 cs35l56_test_type_rev_all_gen_params),
 
 	{ } /* terminator */
 };
-- 
2.47.3


  parent reply	other threads:[~2026-11-20 11:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 11:04 [PATCH 0/4] ASoC: cs35l56: Prepare for SDCA Companion Amp Richard Fitzgerald
2026-11-20 11:04 ` [PATCH 1/4] ASoC: cs35l56: Remove SDW1 TX source controls and widgets Richard Fitzgerald
2026-11-20 11:04 ` [PATCH 2/4] ASoC: cs35l56: Rename the DP3 DAI to cs35l56-ot127 Richard Fitzgerald
2026-11-20 11:04 ` [PATCH 3/4] ASoC: cs35l56: Eliminate trivial regmap patch Richard Fitzgerald
2026-11-20 11:04 ` Richard Fitzgerald [this message]
2026-11-20 12:48 ` [PATCH 0/4] ASoC: cs35l56: Prepare for SDCA Companion Amp Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120110441.2163567-5-rf@opensource.cirrus.com \
    --to=rf@opensource.cirrus.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®