mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ondrej Zary <linux@zary.sk>
To: "Hans de Goede" <hansg@kernel.org>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] Introduce Synology NAS x86 platform driver
Date: Fri, 20 Nov 2026 22:33:00 +0100	[thread overview]
Message-ID: <20261120214014.4188702-1-linux@zary.sk> (raw)

Add platform driver for Synology x86-based NAS devices to support HDD LEDs
controller by ICH9 GPIO pins.

Only DS411+II is supported for now (DS411+ should be the same except CPU).

Unfortunately, the DMI data in BIOS is not very helpful to identify the
device as almost all strings are "To be filled by O.E.M.". Match also the
BIOS date and then check presence of the onboard SiI3531 SATA controller
and i82574L ethernet controller to avoid activation on other systems.

Buttons and other LEDs are not supported by this driver because they're
controlled by a PIC MCU (connected through serial port).

Signed-off-by: Ondrej Zary <linux@zary.sk>
---
Changes in v2:
 - fixed includes (order, added missing, removed kernel.h)
 - added missing DMI and PCI dependencies to Kconfig
 - added PCI device presence check details to changelog
 - used %pe for error message

---
 drivers/platform/x86/Kconfig        |  16 ++++
 drivers/platform/x86/Makefile       |   3 +
 drivers/platform/x86/synology-x86.c | 128 ++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 drivers/platform/x86/synology-x86.c

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 9ce384e0475e..14b366cca2dd 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1059,6 +1059,22 @@ config OXP_EC
 
 source "drivers/platform/x86/tuxedo/Kconfig"
 
+config SYNOLOGY_X86
+	tristate "Synology x86 NAS Platform Driver"
+	depends on DMI
+	depends on GPIOLIB
+	depends on LPC_ICH
+	depends on GPIO_ICH
+	depends on LEDS_CLASS
+	depends on PCI
+	select LEDS_GPIO
+	help
+	  This driver provides support for the HDD LEDs on Synology x86 NAS
+	  devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called synology-x86.
+
 endif # X86_PLATFORM_DEVICES
 
 config P2SB
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 229057234d00..a1806eb0efc9 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -166,3 +166,6 @@ obj-$(CONFIG_SEL3350_PLATFORM)		+= sel3350-platform.o
 
 # OneXPlayer
 obj-$(CONFIG_OXP_EC)			+= oxpec.o
+
+# Synology
+obj-$(CONFIG_SYNOLOGY_X86)		+= synology-x86.o
diff --git a/drivers/platform/x86/synology-x86.c b/drivers/platform/x86/synology-x86.c
new file mode 100644
index 000000000000..80831c8c45d8
--- /dev/null
+++ b/drivers/platform/x86/synology-x86.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Synology x86 NAS platform driver
+ *
+ * Inspired by platform/x86/meraki-mx100.c
+ *
+ * Copyright (C) 2026 Ondrej Zary <linux@zary.sk>
+ */
+
+#include <linux/array_size.h>
+#include <linux/dmi.h>
+#include <linux/err.h>
+#include <linux/gpio/machine.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/string.h>
+
+static const struct gpio_led synology_leds[] = {
+	{ .name = "synology:green:hdd1"	},
+	{ .name = "synology:amber:hdd1" },
+	{ .name = "synology:green:hdd2" },
+	{ .name = "synology:amber:hdd2"	},
+	{ .name = "synology:green:hdd3" },
+	{ .name = "synology:amber:hdd3"	},
+	{ .name = "synology:green:hdd4" },
+	{ .name = "synology:amber:hdd4" },
+};
+
+static const struct gpio_led_platform_data synology_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(synology_leds),
+	.leds		= synology_leds,
+};
+
+#define GPIO_ICH_DRIVER_NAME "gpio_ich"
+
+static struct gpiod_lookup_table synology_leds_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 16, NULL, 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 18, NULL, 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 20, NULL, 2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 32, NULL, 3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 33, NULL, 4, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 34, NULL, 5, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 49, NULL, 6, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 55, NULL, 7, GPIO_ACTIVE_HIGH),
+		{}
+	}
+};
+
+static const struct dmi_system_id synology_systems[] __initconst = {
+	{
+		.ident = "DS411+",	/* DS411+II is the same with faster CPU */
+		.matches = {
+			/* Synology did not put anything in DMI strings */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To Be Filled By O.E.M."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "To Be Filled By O.E.M."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "To be filled by O.E.M."),
+			DMI_EXACT_MATCH(DMI_BIOS_DATE, "05/21/2012"),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, synology_systems);
+
+static struct platform_device *synology_leds_pdev;
+
+static int __init synology_init(void)
+{
+	int ret;
+
+	static const struct pci_device_id pci_sii3531[] = {
+		{ PCI_DEVICE_SUB(PCI_VENDOR_ID_CMD, 0x3531, PCI_VENDOR_ID_CMD, 0x3531) },
+		{ }
+	};
+
+	static const struct pci_device_id pci_i82574l[] = {
+		{ PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x10d3, PCI_VENDOR_ID_INTEL, 0x0000) },
+		{ }
+	};
+
+	const struct dmi_system_id *dmi = dmi_first_match(synology_systems);
+
+	if (!dmi)
+		return -ENODEV;
+
+	/* DS411+ DMI match is too generic, confirm by onboard PCI devices */
+	if (!strcmp(dmi->ident, "DS411+")) {
+		if (!pci_dev_present(pci_sii3531) ||
+		    !pci_dev_present(pci_i82574l))
+			return -ENODEV;
+	}
+
+	pr_info("Detected Synology NAS %s\n", dmi->ident);
+
+	gpiod_add_lookup_table(&synology_leds_table);
+
+	synology_leds_pdev = platform_device_register_data(NULL,
+		"leds-gpio", PLATFORM_DEVID_NONE, &synology_leds_pdata,
+		sizeof(synology_leds_pdata));
+	if (IS_ERR(synology_leds_pdev)) {
+		pr_err("error registering platform device: %pe\n", synology_leds_pdev);
+		ret = PTR_ERR(synology_leds_pdev);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	gpiod_remove_lookup_table(&synology_leds_table);
+	return ret;
+}
+module_init(synology_init);
+
+static void __exit synology_exit(void)
+{
+	platform_device_unregister(synology_leds_pdev);
+	gpiod_remove_lookup_table(&synology_leds_table);
+}
+module_exit(synology_exit);
+
+MODULE_AUTHOR("Ondrej Zary <linux@zary.sk>");
+MODULE_DESCRIPTION("Synology x86 NAS Platform Driver");
+MODULE_LICENSE("GPL");
-- 
Ondrej Zary


             reply	other threads:[~2026-11-20 21:40 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20 21:33 Ondrej Zary [this message]
2026-11-20 21:50 ` Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120214014.4188702-1-linux@zary.sk \
    --to=linux@zary.sk \
    --cc=hansg@kernel.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®