From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: hyunjungg <hj351016@gmail.com>
Cc: Neill Kapron <nkapron@google.com>,
Ruslan Bilovol <ruslan.bilovol@gmail.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH v3] usb: gadget: f_uac1_legacy: disable OUT ep and drain work on teardown
Date: Fri, 20 Nov 2026 12:17:03 +0100 [thread overview]
Message-ID: <2026112044-darling-stained-ab13@gregkh> (raw)
In-Reply-To: <20261108133532.532633-1-hj351016@gmail.com>
On Sun, Nov 08, 2026 at 10:35:32PM +0900, hyunjungg wrote:
> From: Hyunjung Ko <hj351016@gmail.com>
>
> f_uac1_legacy enables the OUT endpoint in f_audio_set_alt() and queues
> usb_requests whose completion handler f_audio_complete() dereferences the
> f_audio (req->context) and audio->out_ep, and which schedules
> audio->playback_work. However f_audio_disable() is empty and nothing
> disables the endpoint or drains the work on teardown, so:
>
> - f_audio_complete() can run after kfree(audio) (the UDC gives back
> pending requests on the still-enabled endpoint during unbind), using
> freed memory -- a use-after-free; and
> - a playback_work still pending runs f_audio_playback_work() against the
> freed f_audio -- a second use-after-free.
>
> Disable the OUT endpoint in f_audio_disable(): the UDC then gives back the
> outstanding requests, so f_audio_complete() stops touching @audio and no
> new playback_work is queued. f_audio_disable() runs in atomic context
> (reset_config() holds cdev->lock), and usb_ep_disable() is safe there.
>
> Drain the work from f_audio_free() instead, where sleeping is allowed:
> cancel_work_sync(&audio->playback_work) before gaudio_cleanup() tears down
> audio->card (which f_audio_playback_work() -> u_audio_playback()
> dereferences) and before kfree(audio). The endpoint is already disabled by
> the time f_audio_disable() has run, so the work cannot be re-queued and
> cancel_work_sync() is sufficient.
>
> Found by static analysis and an automated reviewer; the playback_work
> use-after-free was reproduced with KASAN under dummy_hcd (slab-use-after-
> free in u_audio_playback() from f_audio_playback_work() after
> f_audio_free(); a delay was added to the streaming path to make the
> schedule-vs-free race deterministic). The out_ep/f_audio_complete
> use-after-free is established by code inspection.
>
> Fixes: c6994e6f067c ("USB: gadget: add USB Audio Gadget driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
> ---
> v3: Fix the v2 regressions found in review:
> - Do NOT cancel_work_sync() in f_audio_disable(): that callback runs in
> atomic context (reset_config() under cdev->lock), so the sleeping
> cancel would be a sleep-in-atomic. Only usb_ep_disable() (atomic-safe)
> stays in f_audio_disable(); the work is drained from f_audio_free().
> - Drop the play_queue/copy_buf drain added in v2: audio->copy_buf can
> alias a buffer already on play_queue (f_audio_set_alt altset 0 queues
> it without clearing the pointer) and can hold ERR_PTR(-ENOMEM), so
> freeing it there double-freed / dereferenced an error pointer. That
> buffer-leak + copy_buf aliasing is a separate pre-existing issue and
> is left for a dedicated fix.
> - Correct the Fixes: tag to the original driver commit c6994e6f067c.
>
> v2: https://lore.kernel.org/linux-usb/20261108122645.421721-1-hj351016@gmail.com/
> drivers/usb/gadget/function/f_uac1_legacy.c | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/function/f_uac1_legacy.c b/drivers/usb/gadget/function/f_uac1_legacy.c
> index 7c8d60c..c07f323 100644
> --- a/drivers/usb/gadget/function/f_uac1_legacy.c
> +++ b/drivers/usb/gadget/function/f_uac1_legacy.c
> @@ -697,7 +697,17 @@ static int f_audio_get_alt(struct usb_function *f, unsigned intf)
>
> static void f_audio_disable(struct usb_function *f)
> {
> - return;
> + struct f_audio *audio = func_to_audio(f);
> +
> + /*
> + * Disable the OUT endpoint: the UDC gives back any outstanding
> + * usb_requests, so f_audio_complete() stops dereferencing @audio and
> + * no further playback_work is queued. This callback runs in atomic
> + * context (reset_config() holds cdev->lock), so it must not sleep;
> + * the work is drained from f_audio_free() instead.
> + */
Why is this comment needed?
LLMs love to write comments, be sensible instead.
thanks,
greg k-h
prev parent reply other threads:[~2026-11-20 11:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-08 13:35 hyunjungg
2026-11-20 11:17 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026112044-darling-stained-ab13@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=hj351016@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkapron@google.com \
--cc=ruslan.bilovol@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®