From: Yuugo Yoneda via B4 Relay <devnull+yogo.0917.sabu.gmail.com@kernel.org>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thomas Gleixner <tglx@kernel.org>, Radu Rendec <radu@rendec.net>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Ulf Hansson <ulfh@kernel.org>,
Adrian Hunter <adrian.hunter@intel.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Russell King <linux@armlinux.org.uk>,
Arnd Bergmann <arnd@arndb.de>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Linus Walleij <linusw@kernel.org>,
Drew Fustini <fustini@kernel.org>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-doc@vger.kernel.org,
soc@lists.linux.dev
Subject: [PATCH RFC v2 12/13] ARM: dts: sirf: add SiRF AT550 SoC and Yupiteru YPL514si board
Date: Sat, 21 Nov 2026 21:43:22 +0900 [thread overview]
Message-ID: <20261121-at550-rfc-v1-v2-12-b0309d0789b2@gmail.com> (raw)
In-Reply-To: <20261121-at550-rfc-v1-v2-0-b0309d0789b2@gmail.com>
From: Yuugo Yoneda <yogo.0917.sabu@gmail.com>
Add the SiRF AT550 SoC device tree include and the Yupiteru YPL514si
board device tree.
The bootloader fills in the Linux-owned RAM range and post-divider
counter clock frequency at boot, enables only handed-over peripherals,
and enables simple-framebuffer once display geometry is verified. The
framebuffer range is reserved via a no-map reserved-memory node so
simplefb ioremap_wc() does not alias the ARM linear mapping.
Signed-off-by: Yuugo Yoneda <yogo.0917.sabu@gmail.com>
---
MAINTAINERS | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sirf/Makefile | 2 +
arch/arm/boot/dts/sirf/at550-ypl514si.dts | 63 ++++++++++++++++++++++++++++
arch/arm/boot/dts/sirf/at550.dtsi | 69 +++++++++++++++++++++++++++++++
5 files changed, 136 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1f9c8c08b..c6f0f3fb6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25856,6 +25856,7 @@ F: Documentation/devicetree/bindings/input/touchscreen/sirf,at550-ts.yaml
F: Documentation/devicetree/bindings/interrupt-controller/sirf,at550-intc.yaml
F: Documentation/devicetree/bindings/mmc/sirf,at550-sdhci.yaml
F: Documentation/devicetree/bindings/timer/sirf,at550-timer.yaml
+F: arch/arm/boot/dts/sirf/at550*
F: arch/arm/mach-at550/
F: drivers/clocksource/timer-at550.c
F: drivers/input/touchscreen/at550-ts.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 28fba538d..d28c8eb01 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -30,6 +30,7 @@ subdir-y += renesas
subdir-y += rockchip
subdir-y += samsung
subdir-y += sigmastar
+subdir-y += sirf
subdir-y += socionext
subdir-y += st
subdir-y += sunplus
diff --git a/arch/arm/boot/dts/sirf/Makefile b/arch/arm/boot/dts/sirf/Makefile
new file mode 100644
index 000000000..d1d3d5bfe
--- /dev/null
+++ b/arch/arm/boot/dts/sirf/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_AT550) += at550-ypl514si.dtb
diff --git a/arch/arm/boot/dts/sirf/at550-ypl514si.dts b/arch/arm/boot/dts/sirf/at550-ypl514si.dts
new file mode 100644
index 000000000..d34019858
--- /dev/null
+++ b/arch/arm/boot/dts/sirf/at550-ypl514si.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+#include "at550.dtsi"
+
+/ {
+ model = "Yupiteru YPL514si";
+ compatible = "yupiteru,ypl514si", "sirf,at550";
+
+ chosen {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ framebuffer@c0100000 {
+ compatible = "simple-framebuffer";
+ reg = <0xc0100000 0x3fc00>;
+ width = <480>;
+ height = <272>;
+ stride = <960>;
+ format = "r5g6b5";
+
+ status = "disabled";
+ };
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ /* The bootloader supplies the region allocated for Linux. */
+ reg = <0xc0000000 0>;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ framebuffer@c0100000 {
+ reg = <0xc0100000 0x40000>;
+ no-map;
+ };
+ };
+};
+
+&sd0 {
+ bus-width = <4>;
+ max-frequency = <25000000>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+};
+
+&sd2 {
+ bus-width = <4>;
+ max-frequency = <25000000>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+};
+
+&touchscreen {
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+};
diff --git a/arch/arm/boot/dts/sirf/at550.dtsi b/arch/arm/boot/dts/sirf/at550.dtsi
new file mode 100644
index 000000000..0daf05eca
--- /dev/null
+++ b/arch/arm/boot/dts/sirf/at550.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+
+ counter_clk: clock-counter {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* Boot firmware supplies the rate after the hardware divider. */
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm1136jf-s";
+ reg = <0>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sd0: mmc@56000000 {
+ compatible = "sirf,at550-sdhci";
+ reg = <0x56000000 0x1000>;
+ interrupts = <36>;
+
+ status = "disabled";
+ };
+
+ sd2: mmc@56200000 {
+ compatible = "sirf,at550-sdhci";
+ reg = <0x56200000 0x1000>;
+ interrupts = <20>;
+
+ status = "disabled";
+ };
+
+ touchscreen: touchscreen@80120000 {
+ compatible = "sirf,at550-ts";
+ reg = <0x80120000 0x1000>;
+
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@90020000 {
+ compatible = "sirf,at550-intc";
+ reg = <0x90020000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ };
+
+ timer@90050000 {
+ compatible = "sirf,at550-timer";
+ reg = <0x90050000 0x1000>;
+ interrupts = <0>;
+ clocks = <&counter_clk>;
+ };
+ };
+};
--
2.56.0
next prev parent reply other threads:[~2026-11-21 12:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 12:43 [PATCH RFC v2 00/13] SiRF AT550 / YPL514si initial RAM-boot platform support Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 01/13] dt-bindings: vendor-prefixes: add Yupiteru Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 02/13] dt-bindings: arm: add SiRF AT550 and Yupiteru YPL514si Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 03/13] dt-bindings: interrupt-controller: add SiRF AT550 interrupt controller Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 04/13] irqchip: add SiRF AT550 interrupt controller driver Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 05/13] dt-bindings: timer: add SiRF AT550 system timer Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 06/13] clocksource/drivers/timer-at550: add SiRF AT550 counter and match timer Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 07/13] dt-bindings: input: touchscreen: add SiRF AT550 touchscreen Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 08/13] Input: add polled SiRF AT550 resistive touchscreen driver Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 09/13] dt-bindings: mmc: add SiRF AT550 SDHCI host controller Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 10/13] mmc: sdhci-at550: add SiRF AT550 programmed-I/O host driver Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` [PATCH RFC v2 11/13] ARM: at550: add SiRF AT550 platform support Yuugo Yoneda via B4 Relay
2026-11-21 12:43 ` Yuugo Yoneda via B4 Relay [this message]
2026-11-21 12:43 ` [PATCH RFC v2 13/13] ARM: configs: add at550_defconfig Yuugo Yoneda via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261121-at550-rfc-v1-v2-12-b0309d0789b2@gmail.com \
--to=devnull+yogo.0917.sabu.gmail.com@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=fustini@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=radu@rendec.net \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=soc@lists.linux.dev \
--cc=tglx@kernel.org \
--cc=ulfh@kernel.org \
--cc=yogo.0917.sabu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®