From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=pass header.oldest-pass=0 smtp.remote-ip=100.103.45.18 ARC-Seal: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=pass; t=1795294934; b=WhADjBdcr8yDzKNSDqKddyuxvgdxzGmG2y2icQYpGYmwUEhU2HRPML5+IPP3IZq0a4Jq JGhDyQXwBvrfGSbDY2z3Jhm9+Opgqfsi1lkHdE+7Ba0y+7RM9aP7QWjsZbkbkf2g6j4YO 8+8dR2clfue0nBTtQd8NrOQFoqQc13ZgueH//qWsLKuJiB4InuL8EaSYXAvr+A9Stx/WY bZJF2ihcoi5Op+3aMWRuYQE7AGVsaHCadSt6P2yq2+N+d5wqoswwa9JW8RbxcoWpGbDSN TYgS6kTe+ogj76IrS6t6VTpc/45P+VbjK1JL8h2UbdMJ3uSbH0kn0SJ5LA/tF3EhXyg== ARC-Message-Signature: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1795294934; h=Received:DKIM-Signature:Received:From:Subject:Date:Message-Id: MIME-Version:Content-Type:Content-Transfer-Encoding:X-B4-Tracking: X-Change-ID:To:Cc:X-Mailer:X-Developer-Signature:X-Developer-Key: X-Endpoint-Received:X-Original-From:Reply-To; bh=rgTYsSmP/5dGsFS1FwJdxsbe1ODaCGfnc9qY3cxFf7Q=; b=FRvKLgcc8Nu+sz+7ifPmkOnrypCI+4XNbvZmfy3dwN3dSTl8xSsv1G6gf51xaKNY5lm8 ZWJRP91+g8HEzVL2jVV7fB/Sgqi1du08ulySAi6FeVTKsI0ElGbVJIypFe4HG00Md4aOp pz7nN5Oyj+2Ye1eA2yyg/GI+eH77nZqoIEkX8juaahXIhrkll5XD18/CFCn9s/zaNtc8S mxmb5bFo2Wx5NcwLTLA+J1hUJ0TsBWYBhNKvicTfwTjSjqzT/kaJ1OJS8rCc2n7jNDfTc hbelIM9bd6+syEjszffhnMghaCoUhZHIAONIZZl/evQkBEfE4Ttf9SBDpP22odpq3bg== ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dkim=pass header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20260515 header.b="LVUMh3/C"; arc=pass header.oldest-pass=0 smtp.remote-ip=100.103.45.18 Received: from smtp.kernel.org (quasi.space.kernel.org [100.103.45.18]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 68DC7606A690; Sat, 21 Nov 2026 21:02:14 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20260515 header.b=LVUMh3/C Authentication-Results: smtp.kernel.org; arc=none smtp.remote-ip=100.80.115.77 ARC-Seal: i=1; d=kernel.org; s=arc20260519; a=rsa-sha256; cv=none; t=1795294934; b=JgK7P2sgEOUywDQdhiSVmvAlsz/KEk69/BY8Szq0Ll2shKnLxOFyJshrpPRgVnZz4plx QVZnoJc5TX954+jrMqFtAa0gCkPT6/V6PbyguuDIS2JpAfsEG0naper5NqhPJrxNFD0nc YEn8Jr5iwYNGcrQ7SGLW25lAFcuwZEiZbTZ+LqOjkR4H7jdSQTQdR4DYzUxO3okiU6el3 16UMAST/Hyr1S6Ak6p7YCQAnBMhyzcs7lWiMiEmC7qqyvUM2bXd2ftAG06Qrh038vgRMO c9z/WD9J0Q2E8PrTmr+UDLhxiWOZ6XjU68fOmHbmUhZCWVj56LQmb1ZXinR9CxK1A6g== ARC-Message-Signature: i=1; d=kernel.org; s=arc20260519; a=rsa-sha256; c=relaxed/relaxed; t=1795294934; h=DKIM-Signature:Received:From:Subject:Date:Message-Id:MIME-Version: Content-Type:Content-Transfer-Encoding:X-B4-Tracking:X-Change-ID:To: Cc:X-Mailer:X-Developer-Signature:X-Developer-Key:X-Endpoint-Received: X-Original-From:Reply-To; bh=rgTYsSmP/5dGsFS1FwJdxsbe1ODaCGfnc9qY3cxFf7Q=; b=WzH8R/UUk2VutUiQ5Jv+YdE797TxNLy5EsZYE17DICnHkQS1Wy07/O68ovmA0x0VoLmP CiimPUZPLu68BD/3913Da/qRM8+LsbqYjHUSv1TYcfGIxbvXVZ/FmhIdfOK4PtsLotM6z zcl8bJQKJwWJPB5+8kCaWkF56h1zTTyDmuh2H5KC4R3JpqJCMq4FNgTAEBUXidn3QDDFP OFLti9c2B2XpyqcFsozKNxiwbYVgr+xlLhCLiqVV/7PMgXu+k3AfFdeRZSbORm4VYI5RN NMc5u2hDFhmk3VJR/oCO/zWl4D+bBF1koWibBrNfGIKNNKlF83bxgoooBexlWX0f+kQ== ARC-Authentication-Results: i=1; smtp.kernel.org; arc=none smtp.remote-ip=100.80.115.77 Received: from lkml.kernel.org (nexus.subspace.kernel.org [100.80.115.77]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.kernel.org (Postfix) with ESMTPS id B8CC71F000C4; Sat, 21 Nov 2026 21:02:11 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=kernel.org; s=k20260515; t=1795294934; bh=rgTYsSmP/5dGsFS1FwJdxsbe1ODaCGfnc9qY3cxFf7Q=; h=From:Subject:Date:To:Cc:Reply-To; b=LVUMh3/CN06lLmo5jL6C4vjaavnwxcCz5YzewG+w2VOkHZeerKZZE+GtH7G/SL5xF Gf8Rb+4pJnDFr6iQ8+g2hOK9/yjg8sEFq4Eo1cDkPWZxOqfJ52hZqrRSI94VjHnuM/ krrXvlFrpP5vmnU/oIs+Jm3JnOcQ74V7K7pk/lsaMCPAY3vPI/ideIXvU8cLq8mxKL z6+f2nypZpzoFkSqxorTDLeTXr+lSGMvavHl3TLVKgyplnegatgZ8NAM9sVL5EQnWt 9HBfZVDGHucO/+oJGiNwzq08Od6H55blqpeizkwLJdmuLRhgPZCOPrMISZ/Q12bKCc HzsKFb2Lkm9vQ== Received: from nexus.subspace.kernel.org (localhost [IPv6:::1]) by lkml.kernel.org (Postfix) with ESMTP id 1847C4BDA6; Sat, 21 Nov 2026 21:02:11 +0000 (UTC) From: Fil Dunsky via B4 Relay Subject: [PATCH v8 00/10] ARM: Add support for Cortina Systems CS75xx and Securifi Almond+ Date: Sun, 22 Nov 2026 00:01:45 +0300 Message-Id: <20261122-b4-cs75xx-v8-0-5f971b0dc69c@gmail.com> X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit X-B4-Tracking: v=1; b=H4sIAAAAAAAC/3XOy07DMBAF0F+pvMZo7PGzK/4DsXD8aI1og+ISB VX5d+wigRXo8kr33JkrKXHKsZD97kqmOOeSx3MN5mFH/NGdD5HmUDPhwBVYBDoI6ouWy0IB0XE PQkswpPbfp5jyctt6fvnO5WN4jf7SBlrjmMtlnD5vx2bWev/tzowCFYppL4RCye3T4eTy26MfT 6TtzvgjGTDeS6wSIgSmHVjj01aKu1JUGRKXECygMnwrZS+xl7J9GzV3Dg0G/POtuitVlaijSWi VHbTfSv0rGRO91FWaxHRCYzgbRC/Xdf0CWx6BHdYBAAA= X-Change-ID: 20260930-b4-cs75xx-033a2c047508 To: Arnd Bergmann , Linus Walleij , Krzysztof Kozlowski Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Greg Kroah-Hartman , Jiri Slaby , Russell King , Alexandre Belloni , Drew Fustini , Lorenzo Pieralisi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, Jason Li , Conor Dooley , Fil Dunsky , Krzysztof Kozlowski X-Mailer: b4 0.16.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1795294929; l=12313; i=filipp.dunsky@gmail.com; s=20260930; h=from:subject:message-id; bh=UQolVs5Jl9Dj9kFNkX/UHGRM1wFUQtT86ZVuboVuQmE=; b=pJrFU+Jmw8TqaVFFmZivuJlbISxNXaaPpc5qpAaB4qx218gEThgb8z1LYfz/jHJf7LoDYaxCl AGRj9iOyJ2LCtbIALguzGPcYZPnn1G6Ka+I4LLidQTiboS1lIKnrxzs X-Developer-Key: i=filipp.dunsky@gmail.com; a=ed25519; pk=JAYP8e2rJ54DHOmhNtXud8rl1igAaAXoOHxtJmVXI1g= X-Endpoint-Received: by B4 Relay for filipp.dunsky@gmail.com/20260930 with auth_id=1085 X-Original-From: Fil Dunsky Reply-To: filipp.dunsky@gmail.com This series adds initial support for the Cortina Systems CS75xx ("Goldengate G2") network processors and the first board using one, the Securifi Almond+ touchscreen Wi-Fi router (CS7542, 2x Cortex-A9 r2p1, PL310 r3p1, 512 MiB DDR3, 512 MiB NAND). There is no public documentation for the SoC. The register information comes from the GPL vendor kernels (Linux 2.6.36 for the Almond+, Linux 4.9 for the Verizon FiOS G1100 which uses the same SoC) and from disassembly of the stock U-Boot 2009.11. A full out-of-tree port (clock, irqchip, GPIO, I2C, RTC, NAND, PCIe, MDIO and the packet engine) runs on Linux 6.18 in OpenWrt; this series is the first, minimal step to get the platform into mainline: - bindings: vendor prefix, SoC/board compatibles, an SMP enable method and the UART, - the platform Kconfig and SMP bring-up (the generic DT machine is used, there is no DT_MACHINE_START), - DEBUG_LL for UART0, - a UART driver with console and earlycon support, - SoC dtsi and board dts describing the CPUs, GIC, SCU, timers, L2, UARTs and memory, - multi_v7_defconfig and MAINTAINERS updates. The serial binding and driver (patches 6-7) are meant to go through the soc tree together with the rest of the series rather than through the tty tree, with an Ack from the tty maintainers. Testing: component builds from multi_v7_defconfig with GCC 14 and Clang 21, W=1 (UART built-in and module, SMP code, plus DEBUG_LL and the board DTB with GCC), and dt_binding_check/dtbs_check. On a Securifi Almond+ this series boots v7.4-rc1 to an initramfs shell with both CPUs online ("smp: Brought up 1 node, 2 CPUs"; IPIs and the TWD timer tick on both cores); the L2C-310, the global and TWD timers and the UART driver (ttyCS0) come up. The kernel was started from a running OpenWrt system with a small kexec-style loader rather than from the stock U-Boot, because U-Boot enters the kernel with the MMU on (see 1 below). The same patches on Linux 6.18 in OpenWrt, with the head.S workaround from 1, also boot from NAND through the stock U-Boot; that is how the secondary CPU wake-up fix in v4 was found. The boot watchdog and restart support are handled by the separate ARM TWD watchdog driver, using CPU0 as the system watchdog. Guenter Roeck has applied v9 to his watchdog-next branch: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git/commit/?id=52d91ea73e05c349669fe5c87a09df9476bbbf55 That driver is not included here and has not yet reached the current linux-next or mainline snapshot. The stock bootloader leaves the watchdog armed, so without that driver enabled this minimal platform series still resets after roughly five minutes and has no restart handler. For normal operation it should be integrated with that driver and CONFIG_ARM_TWD_WATCHDOG enabled. The UART source in this version is identical to the one used in the latest RAM tests on 21 November, in a combined platform/peripheral test tree on v7.4-rc1. Those tests brought up two CPUs and ttyCS0 with PROVE_LOCKING and returned to OpenWrt after watchdog expiry and restart. They are additional evidence for the platform and UART path, not tests of direct stock U-Boot entry or of system suspend. AI assistance: coding assistants were used to develop and revise this series. Codex performed the current preflight checks and cover update. Open questions: 1. The same U-Boot enters the kernel with the MMU and data cache enabled (identity map with XN set, dirty lines left in the D-cache), which breaks the decompressor. The OpenWrt port carries a small workaround at the start of arch/arm/boot/compressed/head.S that cleans the cache and turns the MMU off. It is not part of this series. Replacing the bootloader is possible but risky for users of this (discontinued) device. Would a quirk of that kind be acceptable in head.S at all, or should this be solved outside the kernel (e.g. a chain-loaded bootloader)? For the tests below the kernel was started from a running Linux with the MMU off, so this was not an issue. 2. The APB clock is 100, 150 or 170 MHz depending on the boot strap pins. It is modelled as a fixed-clock with the rate set in the board dts. A clock driver for the global control block, which also contains the strap, pinmux and reset registers, will follow and replace it. 3. The Cortex-A9 r2p1 is also affected by errata 742230, 742231, 743622 and 751472, whose workarounds are not available on multiplatform kernels because they are expected to be applied by the bootloader. The stock U-Boot does not apply them. Is there a preferred way to deal with this? 4. The UART ports are named ttyCS to avoid clashing with the 8250 driver in multi_v7_defconfig, and PORT_GENERIC is used instead of a new port type. The FIFO depth is not documented; the driver assumes 16. 5. The top 64 MiB of RAM are reserved: the vendor firmware gives them to the packet engine queue manager and the stock kernel is booted with mem=448M. The reservation will be referenced by the network driver later; I kept it now so that the memory is not handed out and later claimed. Planned follow-ups, as separate series: the peripheral interrupt controller, GPIO and I2C drivers (posted separately, one series per subsystem, with their device tree nodes to follow once this series is merged), the global control block/clock, RTC, NAND, PCIe (DesignWare glue), MDIO, the Ethernet/packet engine and a fix for the SX8650 touchscreen. --- Changes in v8: - collect Linus Walleij's Reviewed-by for the platform/SMP patch - update watchdog status: v9 is applied in Guenter's watchdog-next; the driver uses CPU0 and remains a separate runtime prerequisite - serial: drop SysRq, which needs uart_handle_break() while the UART does not report a break; only run the RX and TX paths for the enabled causes that are pending and return IRQ_NONE otherwise; drop a stale TX empty event before enabling it (sashiko-bot) - Link to v7: https://patch.msgid.link/20261114-b4-cs75xx-v7-0-8f17f38821b4@gmail.com Changes in v7: - rebase on v7.4-rc1 - cpus binding: the boot loader parks the secondary core in a WFI loop that polls the release register, not in a WFE loop - goldengate: drop Linus' Reviewed-by, the patch changed in v4 and v5 (wakeup IPI for the secondary core, PL310 erratum 769419); Linus, could you have another look? - board dts: drop the ramoops region, it is only useful for development - cover: the serial patches go with the rest of the series, not through the tty tree on their own (Krzysztof) - move Signed-off-by after the other trailers - collect Reviewed-by tags - Link to v6: https://patch.msgid.link/20261013-b4-cs75xx-v6-0-37e8f3969b7c@gmail.com Changes in v6: - serial: also ignore overruns when CREAD is cleared, everything received is dropped then (sashiko-bot) - Link to v5: https://patch.msgid.link/20261013-b4-cs75xx-v5-0-4e72aa383d39@gmail.com Changes in v5: - goldengate: select PL310_ERRATA_769419, the PL310 is r3p1-50rel0 (CACHE_ID 0x410000c7), not r3p2 as v4 said; fix the revision in the commit message and here - serial: scale the TX FIFO wait in putchar with the frame time, 10 ms is shorter than one character below 1200 baud (sashiko-bot) - serial: no change for the other two sashiko-bot points on v4: uart_port_tx() checks tx_ready before it sends x_char, and SysRq is reachable through MAGIC_SYSRQ_SERIAL_SEQUENCE; the UART has no break indication that the driver could use - Link to v4: https://patch.msgid.link/20261012-b4-cs75xx-v4-0-df250d903682@gmail.com Changes in v4: - serial: use guard()/scoped_guard() for the port lock and the port table mutex (Jiri Slaby) - serial: honour INPCK/IGNPAR: report parity and framing errors with TTY_PARITY/TTY_FRAME and insert the overrun marker after the characters still in the FIFO (sashiko-bot) - goldengate: also send a wakeup IPI to the secondary core: the stock U-Boot parks it in WFI, SEV alone only worked when it was parked by another kernel (found booting from NAND instead of from RAM); the change is small, I kept Linus' Reviewed-by - drop the RFC prefix - Link to v3: https://patch.msgid.link/20261012-b4-cs75xx-v3-0-0e0d17a098cf@gmail.com Changes in v3: - serial: do not put the console setup callback in .init.text, it is called from a probe that may be deferred past boot (sashiko-bot) - collect Reviewed-by tags - Link to v2: https://patch.msgid.link/20261006-b4-cs75xx-v2-0-b7d6e1e24d44@gmail.com Changes in v2: - serial: drop the empty break_ctl, request_port and release_port callbacks, comment why set_mctrl stays, add a copyright line (Greg) - serial: take the port lock around all IE accesses in startup, flush stale RX data on startup and disable the receiver on shutdown - serial: bound the RX loop per interrupt, check RXDAT_VALID in poll_get_char, scale the console TX drain timeout with the frame time - serial: serialise port index allocation, reject too low clock rates - serial: name the driver after the vendor (cortina-uart.c, SERIAL_CORTINA), as the same block is used in the Cortina Access SoCs (Linus Walleij, Arnd Bergmann); the binding and the help text name the Cortina Systems CS75xx and Cortina Access parts (Jason Li) - serial binding: describe the CS7542 only; other SoCs get their own compatible with "cortina,cs7542-uart" as fallback (Conor Dooley) - debug: keep the character register intact on BE8 in senduart - platform: move arch/arm/mach-cortina to arch/arm/mach-goldengate, as mach-gemini is a Cortina SoC too, and use one ARCH_CORTINA_ACCESS symbol for the whole family, as for the 64-bit Cortina Access parts, with the rationale in the commit message (Linus Walleij, Krzysztof Kozlowski, Arnd Bergmann); mach-goldengate vs. mach-cortina is still open, I am happy to rename the directory if mach-cortina is preferred - collect Reviewed-by and Acked-by tags - Link to v1: https://patch.msgid.link/20260930-b4-cs75xx-v1-0-4617c4463529@gmail.com --- Fil Dunsky (10): dt-bindings: vendor-prefixes: Add Securifi dt-bindings: arm: Add Cortina Systems CS7542 and Securifi Almond+ dt-bindings: arm: cpus: Add Cortina Systems CS7542 enable method ARM: goldengate: Add support for the CS75xx SoC family ARM: debug: Add Cortina Systems CS75xx UART0 support dt-bindings: serial: Add Cortina Systems CS7542 UART tty: serial: Add Cortina UART driver ARM: dts: cortina: Add CS7542 SoC and Securifi Almond+ board ARM: multi_v7_defconfig: Enable Cortina Systems CS75xx support MAINTAINERS: Add entry for Cortina Systems CS75xx Documentation/devicetree/bindings/arm/cortina.yaml | 31 ++ Documentation/devicetree/bindings/arm/cpus.yaml | 2 + .../bindings/serial/cortina,cs7542-uart.yaml | 52 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 11 + arch/arm/Kconfig | 2 + arch/arm/Kconfig.debug | 16 +- arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/cortina/Makefile | 3 + .../dts/cortina/cs7542-securifi-almondplus.dts | 46 ++ arch/arm/boot/dts/cortina/cs7542.dtsi | 127 +++++ arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/include/debug/cs75xx.S | 37 ++ arch/arm/mach-goldengate/Kconfig | 19 + arch/arm/mach-goldengate/Makefile | 2 + arch/arm/mach-goldengate/platsmp.c | 72 +++ drivers/tty/serial/Kconfig | 24 + drivers/tty/serial/Makefile | 1 + drivers/tty/serial/cortina-uart.c | 612 +++++++++++++++++++++ 20 files changed, 1062 insertions(+), 2 deletions(-) --- base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4 change-id: 20260930-b4-cs75xx-033a2c047508 Best regards, -- Fil Dunsky