From: Ahmet Zeren via B4 Relay <devnull+niko3x.proton.me@kernel.org>
To: Jes Sorensen <Jes.Sorensen@gmail.com>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
Ping-Ke Shih <pkshih@realtek.com>,
Ahmet Zeren <niko3x@proton.me>
Subject: [PATCH rtw-next v2 1/3] wifi: rtl8xxxu: honour the rate of injected frames on gen1 chips
Date: Sun, 22 Nov 2026 08:59:29 +0300 [thread overview]
Message-ID: <20261122-b4-inject-v2-1-0ee720fe706d@proton.me> (raw)
In-Reply-To: <20261122-b4-inject-v2-0-0ee720fe706d@proton.me>
From: Ahmet Zeren <niko3x@proton.me>
When a frame is injected with a rate in its radiotap header, the driver
ignores it and leaves the choice to the firmware rate adaptation. On a
RTL8192CU every injected frame went out at MCS 7, whatever was asked.
Use the injected rate and guard interval, and disable rate fallback so
the frame is sent at exactly that rate.
Tested on RTL8192CU (0bda:8178) in monitor mode on 2.4 GHz: 1, 5.5, 6
and 54 Mbps, MCS 0/7/8/15 with long and short GI were all received at
the requested rate. Frames without a radiotap rate are unchanged.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ahmet Zeren <niko3x@proton.me>
---
drivers/net/wireless/realtek/rtl8xxxu/core.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/core.c b/drivers/net/wireless/realtek/rtl8xxxu/core.c
index 604bb1e5b05..3b77a7ce884 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/core.c
@@ -5223,6 +5223,24 @@ static void rtl8xxxu_dump_action(struct device *dev,
}
}
+static bool rtl8xxxu_tx_rate_inject(struct ieee80211_tx_info *tx_info,
+ u32 *rate, bool *sgi)
+{
+ struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
+
+ if (!(tx_info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT))
+ return false;
+
+ if (txrate->flags & IEEE80211_TX_RC_MCS)
+ *rate = DESC_RATE_MCS0 + txrate->idx;
+ else
+ *rate = rtl8xxxu_legacy_ratetable[txrate->idx].hw_value;
+
+ *sgi = txrate->flags & IEEE80211_TX_RC_SHORT_GI;
+
+ return true;
+}
+
/*
* Fill in v1 (gen1) specific TX descriptor bits.
* This format is used on 8188cu/8192cu/8723au
@@ -5240,6 +5258,9 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
u32 rate = 0;
u16 seq_number;
+ bool inject;
+
+ inject = rtl8xxxu_tx_rate_inject(tx_info, &rate, &sgi);
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
dev_info(dev, "%s: TX rate: %d, pkt size %u\n",
@@ -5285,6 +5306,10 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
if (sgi)
tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
+ if (inject)
+ tx_desc->txdw4 |= cpu_to_le32(TXDESC32_USE_DRIVER_RATE |
+ TXDESC_DISABLE_DATA_FB);
+
/*
* rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
*/
--
2.56.1
next prev parent reply other threads:[~2026-11-22 5:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 5:59 [PATCH rtw-next v2 0/3] wifi: rtl8xxxu: honour rate, retries and bandwidth of injected frames Ahmet Zeren via B4 Relay
2026-11-22 5:59 ` Ahmet Zeren via B4 Relay [this message]
2026-11-22 5:59 ` [PATCH rtw-next v2 2/3] wifi: rtl8xxxu: honour the retry count of injected frames on gen1 chips Ahmet Zeren via B4 Relay
2026-11-22 5:59 ` [PATCH rtw-next v2 3/3] wifi: rtl8xxxu: honour the bandwidth " Ahmet Zeren via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122-b4-inject-v2-1-0ee720fe706d@proton.me \
--to=devnull+niko3x.proton.me@kernel.org \
--cc=Jes.Sorensen@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=niko3x@proton.me \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®