mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Abhishek Khade <abhishekkhade69@gmail.com>
To: bpf@vger.kernel.org
Cc: ast@kernel.org, daniel@iogearbox.net, andrii@kernel.org,
	memxor@gmail.com, linux-kernel@vger.kernel.org,
	Abhishek Khade <abhishekkhade69@gmail.com>
Subject: [RFC PATCH bpf-next v2 1/2] bpf: Add bpf_memmem and bpf_dynptr_memmem kfuncs
Date: Sun, 22 Nov 2026 18:04:26 +0530	[thread overview]
Message-ID: <20261122123427.287521-2-abhishekkhade69@gmail.com> (raw)
In-Reply-To: <20261122123427.287521-1-abhishekkhade69@gmail.com>

With the introduction of bpf_strstr, bpf_strnstr, bpf_strcasestr, and
bpf_strcasecmp in Linux 6.17–6.19, BPF programs gained solid support for
floating-offset substring search in null-terminated C-strings.

However, in network packet inspection (TC/XDP, TLS SNI tagging, binary
protocol delimiters) and security monitoring (e.g. BPF LSM hooks
inspecting raw memory or binary execution buffers), data buffers are
frequently not null-terminated and often contain embedded '\0' bytes.
For these use cases, existing string kfuncs terminate prematurely at the
first null byte.

Currently, developers attempting to search variable-length binary
payloads must choose between:
1. Writing a loop using bpf_loop() or open-coded iterators: Even with
   verifier inlining, this executes 1 subprogram call per byte and
   cannot leverage 64-bit word-at-a-time SIMD scanning, making it
   significantly slower than kernel-internal scanning.
2. Streaming raw buffers to user space via BPF ring buffers: This
   induces heavy memory copying and context-switch latency, often
   leading to ring buffer drops under high-throughput workloads.

To address this gap, this RFC proposes two complementary kfuncs in
kernel/bpf/helpers.c:
- bpf_memmem(): Searches for a byte sequence within a flat memory slice.
- bpf_dynptr_memmem(): Searches for a byte sequence within a dynamic
  pointer (struct bpf_dynptr).

Both functions wrap an internal allocation-free scanning routine based
on the kernel's optimized memchr() followed by memcmp(), returning the
matched byte offset or -ENOENT. Buffer sizes are capped at
BPF_MEMMEM_MAX_LEN (2 MB) and needle patterns at BPF_MEMMEM_MAX_NEEDLE_SZ
(4 KB). To prevent pathological quadratic O(N * M) RCU CPU stalls,
cumulative byte comparisons across memcmp calls are strictly bounded by
BPF_MEMMEM_MAX_LEN. Verifier bounds safety is enforced via the standard
__sz naming convention and dynptr type tracking. Both kfuncs are
registered in common_btf_ids to allow access across all program types.

Signed-off-by: Abhishek Khade <abhishekkhade69@gmail.com>
---
 kernel/bpf/helpers.c | 116 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c
index 6788489a2..1f27ad21a 100644
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -3406,6 +3406,120 @@ __bpf_kfunc int bpf_dynptr_memset(const struct bpf_dynptr *p, u64 offset, u64 si
 	return 0;
 }
 
+#define BPF_MEMMEM_MAX_LEN (2 * 1024 * 1024)
+#define BPF_MEMMEM_MAX_NEEDLE_SZ 4096
+
+/* In-kernel binary byte sequence search using memchr() and memcmp() */
+static void *__bpf_memmem(const void *haystack, size_t haystack_sz,
+			  const void *needle, size_t needle_sz)
+{
+	const char *h = haystack;
+	const char *n = needle;
+	const char *end;
+	size_t total_cmp = 0;
+
+	if (needle_sz == 0)
+		return (void *)haystack;
+	if (needle_sz > haystack_sz)
+		return NULL;
+	if (needle_sz == 1)
+		return memchr(haystack, n[0], haystack_sz);
+
+	end = h + haystack_sz - needle_sz + 1;
+	while ((h = memchr(h, n[0], end - h)) != NULL) {
+		total_cmp += needle_sz;
+		if (total_cmp > BPF_MEMMEM_MAX_LEN)
+			return NULL;
+		if (memcmp(h, n, needle_sz) == 0)
+			return (void *)h;
+		h++;
+	}
+
+	return NULL;
+}
+
+/**
+ * bpf_memmem - search for needle byte pattern in a flat memory buffer
+ * @haystack: pointer to haystack memory buffer
+ * @haystack__sz: size of haystack buffer in bytes
+ * @needle: pointer to byte pattern to search for
+ * @needle__sz: size of pattern in bytes
+ * @flags: reserved for future options (must be 0)
+ *
+ * Return:
+ * * >=0      - 0-based byte offset of match in haystack
+ * * %-ENOENT - needle was not found in haystack
+ * * %-EINVAL - invalid flags or parameters
+ * * %-E2BIG  - haystack exceeds 2 MB or needle exceeds 4 KB
+ */
+__bpf_kfunc long bpf_memmem(const void *haystack, u32 haystack__sz,
+			    const void *needle, u32 needle__sz,
+			    u64 flags)
+{
+	const void *match;
+
+	if (flags)
+		return -EINVAL;
+	if (!haystack || !needle || needle__sz == 0 || haystack__sz == 0)
+		return -EINVAL;
+	if (needle__sz > haystack__sz)
+		return -EINVAL;
+	if (haystack__sz > BPF_MEMMEM_MAX_LEN || needle__sz > BPF_MEMMEM_MAX_NEEDLE_SZ)
+		return -E2BIG;
+
+	match = __bpf_memmem(haystack, haystack__sz, needle, needle__sz);
+	if (!match)
+		return -ENOENT;
+
+	return (long)((const char *)match - (const char *)haystack);
+}
+
+/**
+ * bpf_dynptr_memmem - search for needle within a dynamic pointer
+ * @haystack: pointer to dynptr representing the search buffer
+ * @needle: pointer to pattern to search for
+ * @needle__sz: size of pattern in bytes
+ * @flags: reserved for future options (must be 0)
+ *
+ * Return:
+ * * >=0      - 0-based byte offset of match in dynptr buffer
+ * * %-ENOENT - needle was not found
+ * * %-EINVAL - invalid flags, non-linear buffer, or parameters
+ * * %-E2BIG  - dynptr buffer exceeds 2 MB or needle exceeds 4 KB
+ */
+__bpf_kfunc long bpf_dynptr_memmem(const struct bpf_dynptr *haystack,
+				   const void *needle, u32 needle__sz,
+				   u64 flags)
+{
+	struct bpf_dynptr_kern *ptr = (struct bpf_dynptr_kern *)haystack;
+	const void *data;
+	const void *match;
+	u64 size;
+
+	if (flags)
+		return -EINVAL;
+	if (!ptr || !needle || needle__sz == 0)
+		return -EINVAL;
+	if (needle__sz > BPF_MEMMEM_MAX_NEEDLE_SZ)
+		return -E2BIG;
+
+	size = __bpf_dynptr_size(ptr);
+	if (size == 0 || needle__sz > size)
+		return -EINVAL;
+	if (size > BPF_MEMMEM_MAX_LEN)
+		return -E2BIG;
+
+	data = __bpf_dynptr_data(ptr, size);
+	if (!data)
+		return -EINVAL;
+
+	match = __bpf_memmem(data, size, needle, needle__sz);
+	if (!match)
+		return -ENOENT;
+
+	return (long)((const char *)match - (const char *)data);
+}
+
 __bpf_kfunc void *bpf_cast_to_kern_ctx(void *obj)
 {
 	return obj;
@@ -5214,6 +5328,8 @@ BTF_ID_FLAGS(func, bpf_dynptr_size)
 BTF_ID_FLAGS(func, bpf_dynptr_clone)
 BTF_ID_FLAGS(func, bpf_dynptr_copy)
 BTF_ID_FLAGS(func, bpf_dynptr_memset)
+BTF_ID_FLAGS(func, bpf_memmem)
+BTF_ID_FLAGS(func, bpf_dynptr_memmem)
 #ifdef CONFIG_NET
 BTF_ID_FLAGS(func, bpf_modify_return_test_tp)
 #endif
-- 
2.53.0


  reply	other threads:[~2026-11-22 12:34 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-22 12:34 [RFC PATCH bpf-next v2 0/2] " Abhishek Khade
2026-11-22 12:34 ` Abhishek Khade [this message]
2026-11-22 12:34 ` [RFC PATCH bpf-next v2 2/2] selftests/bpf: Add selftests for " Abhishek Khade

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261122123427.287521-2-abhishekkhade69@gmail.com \
    --to=abhishekkhade69@gmail.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=memxor@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®