From: Sasha Levin <sashal@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: Bartosz Golaszewski <brgl@kernel.org>,
Abel Vesa <abelvesa@kernel.org>,
Nathan Chancellor <nathan@kernel.org>,
Julian Braha <julianbraha@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
Sumit Garg <sumit.garg@oss.qualcomm.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] firmware: qcom: Build the TrustZone memory allocator into qcom-scm
Date: Sun, 22 Nov 2026 10:28:43 -0500 [thread overview]
Message-ID: <20261122152843.1113882-1-sashal@kernel.org> (raw)
With QCOM_TZMEM_MODE_SHMBRIDGE=y, qcom_tzmem.ko calls
qcom_scm_shm_bridge_enable(), qcom_scm_shm_bridge_create() and
qcom_scm_shm_bridge_delete() in qcom-scm.ko, and qcom-scm.ko calls
qcom_tzmem_alloc() and friends. With QCOM_SCM=m the two modules depend
on each other, neither can be loaded first, and modules_install fails:
depmod: ERROR: Cycle detected: qcom_scm -> qcom_tzmem -> qcom_scm
depmod: ERROR: Found 2 modules in dependency cycles!
This has been possible since SHM Bridge mode was added. Since commit
35abc3cd8ab6 ("tee: remove TZMEM_MODE_GENERIC") it also happens for
every QCOMTEE=m build with QCOM_SCM=m, because QCOMTEE's select of
QCOM_TZMEM_MODE_SHMBRIDGE now takes effect.
QCOM_TZMEM is selected only by QCOM_SCM, so the two always have the
same value. Build qcom_tzmem.o into qcom-scm.ko, and drop the
MODULE_DESCRIPTION() and MODULE_LICENSE() that qcom-scm already has.
Fixes: f86c61498a57 ("firmware: qcom: tzmem: enable SHM Bridge support")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20261122051636.GA2630332@ax162/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
Tested on arm64 with allnoconfig plus: Nathan's fragment; ARCH_QCOM=y
QCOM_SCM=m SHMBRIDGE=y; ARCH_QCOM=y QCOM_SCM=m QCOMTEE=m; QCOM_SCM=y
QCOMTEE=m; QCOM_SCM=m SHMBRIDGE=n. All build without warnings and pass
modules_install. Without the patch, Nathan's fragment and the QCOMTEE=m
QCOM_SCM=m config fail depmod with the cycle above.
drivers/firmware/qcom/Makefile | 3 +--
drivers/firmware/qcom/qcom_tzmem.c | 2 --
2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/firmware/qcom/Makefile b/drivers/firmware/qcom/Makefile
index 88ce74d74c3e2..74c655856b0c2 100644
--- a/drivers/firmware/qcom/Makefile
+++ b/drivers/firmware/qcom/Makefile
@@ -4,9 +4,8 @@
#
obj-$(CONFIG_QCOM_SCM) += qcom-scm.o
-qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o qcom_tzmem.o
CFLAGS_qcom_scm-smc.o := -I$(src)
-obj-$(CONFIG_QCOM_TZMEM) += qcom_tzmem.o
obj-$(CONFIG_QCOM_QSEECOM) += qcom_qseecom.o
obj-$(CONFIG_QCOM_QSEECOM_UEFISECAPP) += qcom_qseecom_uefisecapp.o
obj-$(CONFIG_QCOM_PAS) += qcom_pas.o
diff --git a/drivers/firmware/qcom/qcom_tzmem.c b/drivers/firmware/qcom/qcom_tzmem.c
index e1d944d0eb63f..9330cd428205e 100644
--- a/drivers/firmware/qcom/qcom_tzmem.c
+++ b/drivers/firmware/qcom/qcom_tzmem.c
@@ -522,6 +522,4 @@ int qcom_tzmem_enable(struct device *dev)
}
EXPORT_SYMBOL_GPL(qcom_tzmem_enable);
-MODULE_DESCRIPTION("TrustZone memory allocator for Qualcomm firmware drivers");
MODULE_AUTHOR("Bartosz Golaszewski <bartosz.golaszewski@linaro.org>");
-MODULE_LICENSE("GPL");
base-commit: 4843f6873f7c4835e62f2c73ba0fd538e57a2f22
--
2.53.0
reply other threads:[~2026-11-22 15:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261122152843.1113882-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=brgl@kernel.org \
--cc=geert+renesas@glider.be \
--cc=julianbraha@gmail.com \
--cc=konradybcio@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nathan@kernel.org \
--cc=sumit.garg@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®