From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>,
linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Subject: [PATCH v3 0/5] ASoC: qcom: Shikra machine driver and DT binding support
Date: Mon, 23 Nov 2026 01:10:45 +0530 [thread overview]
Message-ID: <20261123-shikra-machine-v3-0-e5d074264428@oss.qualcomm.com> (raw)
This series adds Qualcomm Shikra sound-card variant support in DT
bindings and in the sc8280xp machine driver.
Shikra EVK variants use different audio components and processing
architectures:
- CQM/CQS use an I2S-based path with WSA885x amplifiers and
PM4125 + Rouleur codec components.
- CQS uses modem-DSP based audio processing.
- IQS uses a third-party MAX98091 codec with modem-DSP support.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
---
Changes in v3:
- Fixed the dummy codec backend ops issue reported by Prasad.
- Fixed the issues reported on Sashiko.
- Reused the existing DAPM widgets.
- Link to v2: https://lore.kernel.org/all/20260910-shikra-machine-v2-v2-0-9bf6bad589d8@oss.qualcomm.com/
Changes in v2:
- Split the single machine-driver patch into four separate patches
as requested by Srinivas and Dmitry:
- Patch 2/5: extend hw_params for QAIF MI2S/TDM DAI ranges,
add cpu_dai_fmt, VA_CODEC_DMA_TX_1 and be_ops filter changes
- Patch 3/5: CQM variant support
- Patch 4/5: CQS variant support
- Patch 5/5: IQS variant support
- Carry forward Reviewed-by from Krzysztof on the DT binding patch
- Use correct struct type (qcom_snd_soc_common) for all priv_data
- Link to v1: https://lore.kernel.org/all/20260611112946.954172-1-ajay.nandam@oss.qualcomm.com/
To: Srinivas Kandagatla <srini@kernel.org>
To: Liam Girdwood <lgirdwood@gmail.com>
To: Mark Brown <broonie@kernel.org>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Jaroslav Kysela <perex@perex.cz>
To: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
Ajay Kumar Nandam (5):
ASoC: dt-bindings: qcom,sm8250: add Shikra sound card compatibles
ASoC: qcom: sc8280xp: add Shikra backend handling
ASoC: qcom: sc8280xp: Add shikra-cqm-evk compatible support
ASoC: qcom: sc8280xp: Add shikra-cqs-evk compatible support
ASoC: qcom: sc8280xp: Add shikra-iqs-evk compatible support
.../devicetree/bindings/sound/qcom,sm8250.yaml | 3 +
sound/soc/qcom/common.c | 1 +
sound/soc/qcom/sc8280xp.c | 70 +++++++++++++++++++++-
sound/soc/qcom/sdw.c | 1 +
4 files changed, 72 insertions(+), 3 deletions(-)
---
base-commit: 7884221ca9857a317bf4bd81ac3bf5528f266feb
change-id: 20261123-shikra-machine-dc95e3c86af3
Best regards,
--
Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
next reply other threads:[~2026-11-22 19:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-22 19:40 Mohammad Rafi Shaik [this message]
2026-11-22 19:40 ` [PATCH v3 1/5] ASoC: dt-bindings: qcom,sm8250: add Shikra sound card compatibles Mohammad Rafi Shaik
2026-11-22 19:40 ` [PATCH v3 2/5] ASoC: qcom: sc8280xp: add Shikra backend handling Mohammad Rafi Shaik
2026-11-22 19:40 ` [PATCH v3 3/5] ASoC: qcom: sc8280xp: Add shikra-cqm-evk compatible support Mohammad Rafi Shaik
2026-11-22 19:40 ` [PATCH v3 4/5] ASoC: qcom: sc8280xp: Add shikra-cqs-evk " Mohammad Rafi Shaik
2026-11-22 19:40 ` [PATCH v3 5/5] ASoC: qcom: sc8280xp: Add shikra-iqs-evk " Mohammad Rafi Shaik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261123-shikra-machine-v3-0-e5d074264428@oss.qualcomm.com \
--to=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=ajay.nandam@oss.qualcomm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=prasad.kumpatla@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®