From: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
To: Vignesh R <vigneshr@ti.com>, Marek Vasut <marek.vasut@gmail.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>,
matthew.gerlach@linux.intel.com,
linux-arm-kernel@lists.infradead.org,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] mtd: spi-nor: cadence-quadspi: Refactor indirect read/write sequence.
Date: Wed, 20 Dec 2017 16:00:20 +0100 [thread overview]
Message-ID: <202bc35e-bb32-9ccd-7330-4b4812468834@wedev4u.fr> (raw)
In-Reply-To: <20171207063804.29436-2-vigneshr@ti.com>
Hi Vignesh,
Le 07/12/2017 à 07:38, Vignesh R a écrit :
> Move configuring of indirect read/write start address to
> cqspi_indirect_*_execute() function and rename cqspi_indirect_*_setup()
> function. This will help to reuse cqspi_indirect_*_setup() function for
> supporting direct access mode.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
This patch looks good to me.
Best regards,
Cyrille
> ---
> drivers/mtd/spi-nor/cadence-quadspi.c | 27 ++++++++++++---------------
> 1 file changed, 12 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index 75a2bc447a99..becc7d714ab8 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -450,8 +450,7 @@ static int cqspi_command_write_addr(struct spi_nor *nor,
> return cqspi_exec_flash_cmd(cqspi, reg);
> }
>
> -static int cqspi_indirect_read_setup(struct spi_nor *nor,
> - const unsigned int from_addr)
> +static int cqspi_read_setup(struct spi_nor *nor)
> {
> struct cqspi_flash_pdata *f_pdata = nor->priv;
> struct cqspi_st *cqspi = f_pdata->cqspi;
> @@ -459,7 +458,6 @@ static int cqspi_indirect_read_setup(struct spi_nor *nor,
> unsigned int dummy_clk = 0;
> unsigned int reg;
>
> - writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
>
> reg = nor->read_opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
> reg |= cqspi_calc_rdreg(nor, nor->read_opcode);
> @@ -493,8 +491,8 @@ static int cqspi_indirect_read_setup(struct spi_nor *nor,
> return 0;
> }
>
> -static int cqspi_indirect_read_execute(struct spi_nor *nor,
> - u8 *rxbuf, const unsigned n_rx)
> +static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
> + loff_t from_addr, const size_t n_rx)
> {
> struct cqspi_flash_pdata *f_pdata = nor->priv;
> struct cqspi_st *cqspi = f_pdata->cqspi;
> @@ -504,6 +502,7 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor,
> unsigned int bytes_to_read = 0;
> int ret = 0;
>
> + writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
> writel(remaining, reg_base + CQSPI_REG_INDIRECTRDBYTES);
>
> /* Clear all interrupts. */
> @@ -570,8 +569,7 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor,
> return ret;
> }
>
> -static int cqspi_indirect_write_setup(struct spi_nor *nor,
> - const unsigned int to_addr)
> +static int cqspi_write_setup(struct spi_nor *nor)
> {
> unsigned int reg;
> struct cqspi_flash_pdata *f_pdata = nor->priv;
> @@ -584,8 +582,6 @@ static int cqspi_indirect_write_setup(struct spi_nor *nor,
> reg = cqspi_calc_rdreg(nor, nor->program_opcode);
> writel(reg, reg_base + CQSPI_REG_RD_INSTR);
>
> - writel(to_addr, reg_base + CQSPI_REG_INDIRECTWRSTARTADDR);
> -
> reg = readl(reg_base + CQSPI_REG_SIZE);
> reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
> reg |= (nor->addr_width - 1);
> @@ -593,8 +589,8 @@ static int cqspi_indirect_write_setup(struct spi_nor *nor,
> return 0;
> }
>
> -static int cqspi_indirect_write_execute(struct spi_nor *nor,
> - const u8 *txbuf, const unsigned n_tx)
> +static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr,
> + const u8 *txbuf, const size_t n_tx)
> {
> const unsigned int page_size = nor->page_size;
> struct cqspi_flash_pdata *f_pdata = nor->priv;
> @@ -604,6 +600,7 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor,
> unsigned int write_bytes;
> int ret;
>
> + writel(to_addr, reg_base + CQSPI_REG_INDIRECTWRSTARTADDR);
> writel(remaining, reg_base + CQSPI_REG_INDIRECTWRBYTES);
>
> /* Clear all interrupts. */
> @@ -900,11 +897,11 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
> if (ret)
> return ret;
>
> - ret = cqspi_indirect_write_setup(nor, to);
> + ret = cqspi_write_setup(nor);
> if (ret)
> return ret;
>
> - ret = cqspi_indirect_write_execute(nor, buf, len);
> + ret = cqspi_indirect_write_execute(nor, to, buf, len);
> if (ret)
> return ret;
>
> @@ -920,11 +917,11 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
> if (ret)
> return ret;
>
> - ret = cqspi_indirect_read_setup(nor, from);
> + ret = cqspi_read_setup(nor);
> if (ret)
> return ret;
>
> - ret = cqspi_indirect_read_execute(nor, buf, len);
> + ret = cqspi_indirect_read_execute(nor, buf, from, len);
> if (ret)
> return ret;
>
>
next prev parent reply other threads:[~2017-12-20 15:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 6:38 [PATCH 0/2] CQSPI: Add direct mode support Vignesh R
2017-12-07 6:38 ` [PATCH 1/2] mtd: spi-nor: cadence-quadspi: Refactor indirect read/write sequence Vignesh R
2017-12-20 15:00 ` Cyrille Pitchen [this message]
2017-12-07 6:38 ` [PATCH 2/2] mtd: spi-nor: cadence-quadspi: Add support for direct access mode Vignesh R
2017-12-20 15:13 ` Cyrille Pitchen
2017-12-22 9:48 ` Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202bc35e-bb32-9ccd-7330-4b4812468834@wedev4u.fr \
--to=cyrille.pitchen@wedev4u.fr \
--cc=computersforpeace@gmail.com \
--cc=dinguyen@kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=matthew.gerlach@linux.intel.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®