From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Balakrishnan Sambath <balakrishnan.s@microchip.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] ARM: dts: microchip: sama7g5: add sama7g5 compatible
Date: Fri, 23 Feb 2024 14:56:04 +0200 [thread overview]
Message-ID: <2063e4a0-4287-4b02-b7d1-d762c4a69966@tuxon.dev> (raw)
In-Reply-To: <20240223-b4-sama5d2-flexcom-yaml-v2-1-7e96c60c7701@microchip.com>
Hi, Balakrishnan,
On 23.02.2024 11:16, Balakrishnan Sambath wrote:
> Add sama7g5 flexcom specific compatible in DT with fallbacks.
Can you also take care of lan966x and sam9x60?
Thank you,
Claudiu Beznea
>
> Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
> ---
> arch/arm/boot/dts/microchip/sama7g5.dtsi | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> index 269e0a3ca269..6496a4ca376f 100644
> --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
> @@ -698,7 +698,7 @@ sha: crypto@e1814000 {
> };
>
> flx0: flexcom@e1818000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe1818000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> #address-cells = <1>;
> @@ -723,7 +723,7 @@ uart0: serial@200 {
> };
>
> flx1: flexcom@e181c000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe181c000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
> #address-cells = <1>;
> @@ -747,7 +747,7 @@ i2c1: i2c@600 {
> };
>
> flx3: flexcom@e1824000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe1824000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
> #address-cells = <1>;
> @@ -791,7 +791,7 @@ tdes: crypto@e2014000 {
> };
>
> flx4: flexcom@e2018000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2018000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
> #address-cells = <1>;
> @@ -817,7 +817,7 @@ uart4: serial@200 {
> };
>
> flx7: flexcom@e2024000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2024000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
> #address-cells = <1>;
> @@ -911,7 +911,7 @@ tcb0: timer@e2814000 {
> };
>
> flx8: flexcom@e2818000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2818000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
> #address-cells = <1>;
> @@ -935,7 +935,7 @@ i2c8: i2c@600 {
> };
>
> flx9: flexcom@e281c000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe281c000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
> #address-cells = <1>;
> @@ -959,7 +959,7 @@ i2c9: i2c@600 {
> };
>
> flx11: flexcom@e2824000 {
> - compatible = "atmel,sama5d2-flexcom";
> + compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
> reg = <0xe2824000 0x200>;
> clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
> #address-cells = <1>;
>
next prev parent reply other threads:[~2024-02-23 12:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-23 9:16 [PATCH v2 0/2] Convert atmel-flexcom to json-schema Balakrishnan Sambath
2024-02-23 9:16 ` [PATCH v2 1/2] ARM: dts: microchip: sama7g5: add sama7g5 compatible Balakrishnan Sambath
2024-02-23 12:56 ` claudiu beznea [this message]
2024-02-23 20:23 ` claudiu beznea
2024-02-23 9:16 ` [PATCH v2 2/2] dt-bindings: mfd: Convert atmel-flexcom to json-schema Balakrishnan Sambath
2024-02-23 17:11 ` (subset) " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2063e4a0-4287-4b02-b7d1-d762c4a69966@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=alexandre.belloni@bootlin.com \
--cc=balakrishnan.s@microchip.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kavyasree.kotagiri@microchip.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®