mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Mike Looijmans <mike.looijmans@topic.nl>, linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, lars@metafoo.de,
	Michael.Hennerich@analog.com, knaack.h@gmx.de, pmeerw@pmeerw.net
Subject: Re: [PATCH] iio:ad5064: Add support for ltc2633 and similar devices
Date: Thu, 27 Apr 2017 06:52:05 +0100	[thread overview]
Message-ID: <20b926f2-58ee-52d8-6520-a99e4640125d@kernel.org> (raw)
In-Reply-To: <1493199875-11912-1-git-send-email-mike.looijmans@topic.nl>

On 26/04/17 10:44, Mike Looijmans wrote:
> The Linear Technology LTC2631, LTC2633 and LTC2635 are very similar
> to the AD5064 device, in particular the LTC2627.
> 
> This patch adds support for those devices. Only the LTC2633 has been
> tested, which is the 2-channel variant. The LTC2631 is the 1-channel,
> and the LTC2635 the 4-channel version. The actual DAC resolution depends
> on the exact chip type and can be 12, 10 or 8 bits, using the upper bits
> so this has no effect on the register map. The internal reference is set
> to 2.5V on "L" versions, and it's 4.096V for "H" versions.
> 
> Datasheets:
>     LTC2631: http://www.linear.com/docs/26553
>     LTC2633: http://www.linear.com/docs/39529
>     LTC2635: http://www.linear.com/docs/28754
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Looks fine to me, but I'd like to give time for Lars to take a look
as it is his driver.

Jonathan
> ---
>  drivers/iio/dac/Kconfig  |  3 ++-
>  drivers/iio/dac/ad5064.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 58 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index d3084028..31ffb67 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -13,7 +13,8 @@ config AD5064
>  	  AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R, AD5627, AD5627R,
>  	  AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R, AD5666,
>  	  AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616,
> -	  LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to Analog Converter.
> +	  LTC2617, LTC2619, LTC2626, LTC2627, LTC2629, LTC2631, LTC2633, LTC2635
> +	  Digital to Analog Converter.
>  
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called ad5064.
> diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
> index 6803e4a..b440180 100644
> --- a/drivers/iio/dac/ad5064.c
> +++ b/drivers/iio/dac/ad5064.c
> @@ -2,8 +2,8 @@
>   * AD5024, AD5025, AD5044, AD5045, AD5064, AD5064-1, AD5065, AD5625, AD5625R,
>   * AD5627, AD5627R, AD5628, AD5629R, AD5645R, AD5647R, AD5648, AD5665, AD5665R,
>   * AD5666, AD5667, AD5667R, AD5668, AD5669R, LTC2606, LTC2607, LTC2609, LTC2616,
> - * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629 Digital to analog converters
> - * driver
> + * LTC2617, LTC2619, LTC2626, LTC2627, LTC2629, LTC2631, LTC2633, LTC2635
> + * Digital to analog converters driver
>   *
>   * Copyright 2011 Analog Devices Inc.
>   *
> @@ -168,6 +168,12 @@ enum ad5064_type {
>  	ID_LTC2626,
>  	ID_LTC2627,
>  	ID_LTC2629,
> +	ID_LTC2631_L,
> +	ID_LTC2631_H,
> +	ID_LTC2633_L,
> +	ID_LTC2633_H,
> +	ID_LTC2635_L,
> +	ID_LTC2635_H,
>  };
>  
>  static int ad5064_write(struct ad5064_state *st, unsigned int cmd,
> @@ -724,6 +730,48 @@ static int ad5064_write_raw(struct iio_dev *indio_dev,
>  		.num_channels = 4,
>  		.regmap_type = AD5064_REGMAP_LTC,
>  	},
> +	[ID_LTC2631_L] = {
> +		.shared_vref = true,
> +		.internal_vref = 2500000,
> +		.channels = ltc2627_channels,
> +		.num_channels = 1,
> +		.regmap_type = AD5064_REGMAP_LTC,
> +	},
> +	[ID_LTC2631_H] = {
> +		.shared_vref = true,
> +		.internal_vref = 4096000,
> +		.channels = ltc2627_channels,
> +		.num_channels = 1,
> +		.regmap_type = AD5064_REGMAP_LTC,
> +	},
> +	[ID_LTC2633_L] = {
> +		.shared_vref = true,
> +		.internal_vref = 2500000,
> +		.channels = ltc2627_channels,
> +		.num_channels = 2,
> +		.regmap_type = AD5064_REGMAP_LTC,
> +	},
> +	[ID_LTC2633_H] = {
> +		.shared_vref = true,
> +		.internal_vref = 4096000,
> +		.channels = ltc2627_channels,
> +		.num_channels = 2,
> +		.regmap_type = AD5064_REGMAP_LTC,
> +	},
> +	[ID_LTC2635_L] = {
> +		.shared_vref = true,
> +		.internal_vref = 2500000,
> +		.channels = ltc2627_channels,
> +		.num_channels = 4,
> +		.regmap_type = AD5064_REGMAP_LTC,
> +	},
> +	[ID_LTC2635_H] = {
> +		.shared_vref = true,
> +		.internal_vref = 4096000,
> +		.channels = ltc2627_channels,
> +		.num_channels = 4,
> +		.regmap_type = AD5064_REGMAP_LTC,
> +	},
>  };
>  
>  static inline unsigned int ad5064_num_vref(struct ad5064_state *st)
> @@ -982,6 +1030,12 @@ static int ad5064_i2c_remove(struct i2c_client *i2c)
>  	{"ltc2626", ID_LTC2626},
>  	{"ltc2627", ID_LTC2627},
>  	{"ltc2629", ID_LTC2629},
> +	{"ltc2631-l", ID_LTC2631_L},
> +	{"ltc2631-h", ID_LTC2631_H},
> +	{"ltc2633-l", ID_LTC2633_L},
> +	{"ltc2633-h", ID_LTC2633_H},
> +	{"ltc2635-l", ID_LTC2635_L},
> +	{"ltc2635-h", ID_LTC2635_H},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids);
> 

  reply	other threads:[~2017-04-27  5:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-26  9:44 Mike Looijmans
2017-04-27  5:52 ` Jonathan Cameron [this message]
2017-04-27  9:16   ` Lars-Peter Clausen
2017-04-27 17:09     ` Mike Looijmans
2017-05-08  7:26     ` [PATCH v2] " Mike Looijmans
2017-05-10  9:12       ` Lars-Peter Clausen
2017-05-14 15:18         ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20b926f2-58ee-52d8-6520-a99e4640125d@kernel.org \
    --to=jic23@kernel.org \
    --cc=Michael.Hennerich@analog.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mike.looijmans@topic.nl \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome