mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Eric Dumazet <eric.dumazet@gmail.com>
To: Gatis Peisenieks <gatis@mikrotik.com>,
	chris.snook@gmail.com, davem@davemloft.net, kuba@kernel.org,
	hkallweit1@gmail.com, jesse.brandeburg@intel.com,
	dchickles@marvell.com, tully@mikrotik.com,
	eric.dumazet@gmail.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 2/4] atl1c: improve performance by avoiding unnecessary pcie writes on xmit
Date: Tue, 11 May 2021 23:39:37 +0200	[thread overview]
Message-ID: <217ba8c9-ab09-46be-3e49-149f810e72fd@gmail.com> (raw)
In-Reply-To: <20210511190518.8901-3-gatis@mikrotik.com>



On 5/11/21 9:05 PM, Gatis Peisenieks wrote:
> The kernel has xmit_more facility that hints the networking driver xmit
> path about whether more packets are coming soon. This information can be
> used to avoid unnecessary expensive PCIe transaction per tx packet at a
> slight increase in latency.
> 
> Max TX pps on Mikrotik 10/25G NIC in a Threadripper 3960X system
> improved from 1150Kpps to 1700Kpps.
> 
> Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
> ---
>  drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> index 28c30d5288e4..2a8ab51b0ed9 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> @@ -2211,8 +2211,8 @@ static int atl1c_tx_map(struct atl1c_adapter *adapter,
>  	return -1;
>  }
>  
> -static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb,
> -			   struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type)
> +static void atl1c_tx_queue(struct atl1c_adapter *adapter,
> +			   enum atl1c_trans_queue type)
>  {
>  	struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
>  	u16 reg;
> @@ -2238,6 +2238,7 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
>  
>  	if (atl1c_tpd_avail(adapter, type) < tpd_req) {
>  		/* no enough descriptor, just stop queue */
> +		atl1c_tx_queue(adapter, type);
>  		netif_stop_queue(netdev);
>  		return NETDEV_TX_BUSY;
>  	}
> @@ -2246,6 +2247,7 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
>  
>  	/* do TSO and check sum */
>  	if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) {
> +		atl1c_tx_queue(adapter, type);
>  		dev_kfree_skb_any(skb);
>  		return NETDEV_TX_OK;
>  	}
> @@ -2270,8 +2272,11 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
>  		atl1c_tx_rollback(adapter, tpd, type);
>  		dev_kfree_skb_any(skb);
>  	} else {
> -		netdev_sent_queue(adapter->netdev, skb->len);
> -		atl1c_tx_queue(adapter, skb, tpd, type);
> +		bool more = netdev_xmit_more();
> +
> +		__netdev_sent_queue(adapter->netdev, skb->len, more);


This is probably buggy.

You must check and use the return code of this function,
as in :

	bool door_bell = __netdev_sent_queue(adapter->netdev, skb->len, netdev_xmit_more());

	if (door_bell)
		atl1c_tx_queue(adapter, type);


> +		if (!more)
> +			atl1c_tx_queue(adapter, type);
>  	}
>  
>  	return NETDEV_TX_OK;
> 

  reply	other threads:[~2021-05-11 21:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 19:05 [PATCH net-next 0/4] atl1c: support for Mikrotik 10/25G NIC features Gatis Peisenieks
2021-05-11 19:05 ` [PATCH net-next 1/4] atl1c: show correct link speed on Mikrotik 10/25G NIC Gatis Peisenieks
2021-05-11 19:05 ` [PATCH net-next 2/4] atl1c: improve performance by avoiding unnecessary pcie writes on xmit Gatis Peisenieks
2021-05-11 21:39   ` Eric Dumazet [this message]
2021-05-12  7:53     ` Gatis Peisenieks
2021-05-12  2:39   ` Chris Snook
2021-05-12  8:33     ` David Laight
2021-05-12 14:35     ` Gatis Peisenieks
2021-05-11 19:05 ` [PATCH net-next 3/4] atl1c: adjust max mtu according to Mikrotik 10/25G NIC ability Gatis Peisenieks
2021-05-11 19:05 ` [PATCH net-next 4/4] atl1c: enable rx csum offload on Mikrotik 10/25G NIC Gatis Peisenieks
  -- strict thread matches above, loose matches on Subject: below --
2021-04-19 14:34 [PATCH net-next 0/4] atl1c: support for Mikrotik 10/25G NIC features Gatis Peisenieks
2021-04-19 14:34 ` [PATCH net-next 2/4] atl1c: improve performance by avoiding unnecessary pcie writes on xmit Gatis Peisenieks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=217ba8c9-ab09-46be-3e49-149f810e72fd@gmail.com \
    --to=eric.dumazet@gmail.com \
    --cc=chris.snook@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dchickles@marvell.com \
    --cc=gatis@mikrotik.com \
    --cc=hkallweit1@gmail.com \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=tully@mikrotik.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®