mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Tianhao Chai <cth451@gmail.com>,
	Igor Russkikh <irusskikh@marvell.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>
Subject: Re: [PATCH] ethernet: aquantia: Try MAC address from device tree
Date: Mon, 29 Nov 2021 23:11:58 +0100	[thread overview]
Message-ID: <223aeb87-0949-65f1-f119-4c55d58bc14a@gmail.com> (raw)
In-Reply-To: <20211128023733.GA466664@cth-desktop-dorm.mad.wi.cth451.me>

On 28.11.2021 03:37, Tianhao Chai wrote:
> Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
> card, but instead need to obtain MAC addresses from the device tree. In
> this case the hardware will report an invalid MAC.
> 
> Currently atlantic driver does not query the DT for MAC address and will
> randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
> This patch causes the driver to perfer a valid MAC address from OF (if
> present) over HW self-reported MAC and only fall back to a random MAC
> address when neither of them is valid.
> 
> Signed-off-by: Tianhao Chai <cth451@gmail.com>
> ---
>  .../net/ethernet/aquantia/atlantic/aq_nic.c   | 28 ++++++++++++-------
>  1 file changed, 18 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
> index 1acf544afeb4..ae6c4a044390 100644
> --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
> +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
> @@ -316,18 +316,26 @@ int aq_nic_ndev_register(struct aq_nic_s *self)
>  	aq_macsec_init(self);
>  #endif
>  
> -	mutex_lock(&self->fwreq_mutex);
> -	err = self->aq_fw_ops->get_mac_permanent(self->aq_hw, addr);
> -	mutex_unlock(&self->fwreq_mutex);
> -	if (err)
> -		goto err_exit;
> +	if (eth_platform_get_mac_address(&self->pdev->dev, addr) == 0 &&
> +	    is_valid_ether_addr(addr)) {

Calling is_valid_ether_addr() shouldn't be needed here. of_get_mac_addr()
does this check already. If you should decide to keep this check:
Kernel doc of is_valid_ether_addr() states that argument must be
word-aligned. So you may need to add a __align(2) to the address char
array definition.

> +		// DT supplied a valid MAC address
> +		eth_hw_addr_set(self->ndev, addr);
> +	} else {
> +		// If DT has none or an invalid one, ask device for MAC address
> +		mutex_lock(&self->fwreq_mutex);
> +		err = self->aq_fw_ops->get_mac_permanent(self->aq_hw, addr);
> +		mutex_unlock(&self->fwreq_mutex);
>  
> -	eth_hw_addr_set(self->ndev, addr);
> +		if (err)
> +			goto err_exit;
>  
> -	if (!is_valid_ether_addr(self->ndev->dev_addr) ||
> -	    !aq_nic_is_valid_ether_addr(self->ndev->dev_addr)) {
> -		netdev_warn(self->ndev, "MAC is invalid, will use random.");
> -		eth_hw_addr_random(self->ndev);
> +		if (is_valid_ether_addr(addr) &&
> +		    aq_nic_is_valid_ether_addr(addr)) {
> +			eth_hw_addr_set(self->ndev, addr);
> +		} else {
> +			netdev_warn(self->ndev, "MAC is invalid, will use random.");
> +			eth_hw_addr_random(self->ndev);
> +		}
>  	}
>  
>  #if defined(AQ_CFG_MAC_ADDR_PERMANENT)
> 


  parent reply	other threads:[~2021-11-29 22:34 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-28  2:37 Tianhao Chai
2021-11-28 16:33 ` Andrew Lunn
2021-11-28 17:08   ` Hector Martin
2021-11-30  2:32     ` Andrew Lunn
2021-11-30  4:43       ` Tianhao Chai
2021-12-02  5:10       ` Hector Martin
2021-11-29 22:11 ` Heiner Kallweit [this message]
2021-11-30  3:12   ` Tianhao Chai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=223aeb87-0949-65f1-f119-4c55d58bc14a@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=cth451@gmail.com \
    --cc=davem@davemloft.net \
    --cc=irusskikh@marvell.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=netdev@vger.kernel.org \
    --cc=sven@svenpeter.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®