Re: [PATCH 2/6] ARM: dts: Add missing pinctrl entries for STM32MP15

[Alexandre Torgue <alexandre.torgue@st.com>]

Hi Mani

Commit title should be ARM: dts: stm32 ...
otherwise it's good.

regards
alex

On 4/20/20 7:31 PM, mani@kernel.org wrote:
> From: Manivannan Sadhasivam <mani@kernel.org>
> 
> These pinctrl definitions will be used by Stinger96/IoTBox boards
> from Shiratech.
> 
> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
> ---
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++++++++++++++++++++++
>   1 file changed, 64 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index aeddcaadb829..858c83038e5a 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1519,6 +1519,30 @@
>   		};
>   	};
>   
> +	usart2_pins_b: usart2-1 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
> +				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <0>;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
> +				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
> +			bias-disable;
> +		};
> +	};
> +
> +	usart2_sleep_pins_b: usart2-sleep-1 {
> +		pins {
> +			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
> +				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
> +				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
> +				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
> +		};
> +	};
> +
>   	usart3_pins_a: usart3-0 {
>   		pins1 {
>   			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
> @@ -1558,6 +1582,19 @@
>   		};
>   	};
>   
> +	uart4_pins_c: uart4-2 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <0>;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
> +			bias-disable;
> +		};
> +	};
> +
>   	uart7_pins_a: uart7-0 {
>   		pins1 {
>   			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
> @@ -1573,6 +1610,19 @@
>   		};
>   	};
>   
> +	uart7_pins_b: uart7-1 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <0>;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
> +			bias-disable;
> +		};
> +	};
> +
>   	uart8_pins_a: uart8-0 {
>   		pins1 {
>   			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
> @@ -1647,4 +1697,18 @@
>   			bias-disable;
>   		};
>   	};
> +
> +	spi4_pins_a: spi4-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
> +				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <1>;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
> +			bias-disable;
> +		};
> +	};
>   };
>