From: Neil Armstrong <neil.armstrong@linaro.org>
To: "Barnabás Czémán" <barnabas.czeman@mainlining.org>,
"Jessica Zhang" <quic_jesszhan@quicinc.com>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] drivers: gpu: drm: panel: Add BOE TD4320
Date: Mon, 5 May 2025 09:47:35 +0200 [thread overview]
Message-ID: <22951635-e12e-4db2-9a74-5d5cd991e177@linaro.org> (raw)
In-Reply-To: <20250430-lavender-panel-v3-2-7625e62d62b2@mainlining.org>
On 30/04/2025 21:42, Barnabás Czémán wrote:
> Add driver for BOE TD4320 DSI panel, used in Xiaomi Redmi Note 7
> mobile phone.
>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 ++
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-boe-td4320.c | 247 +++++++++++++++++++++++++++++++
> 3 files changed, 257 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 7e9c60a626fbbabb954ed2a7e3d1ef5eee0679d6..639f4324db617a0a2a56debd75eeca7a50e60df6 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -67,6 +67,15 @@ config DRM_PANEL_BOE_HIMAX8279D
> 24 bit RGB per pixel. It provides a MIPI DSI interface to
> the host and has a built-in LED backlight.
>
> +config DRM_PANEL_BOE_TD4320
> + tristate "BOE TD4320 DSI panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for BOE TD4320 1080x2340
> + video mode panel found in Xiaomi Redmi Note 7 smartphones.
> +
> config DRM_PANEL_BOE_TH101MB31UIG002_28A
> tristate "Boe TH101MB31UIG002-28A panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 883974f0cba128e28f23e31512f8d30d59913b0e..5eec88e4ac3dea6a1cb357e27a32d2d14c64af9b 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
> obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
> obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
> obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
> +obj-$(CONFIG_DRM_PANEL_BOE_TD4320) += panel-boe-td4320.o
> obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
> obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_LL2) += panel-boe-tv101wum-ll2.o
> obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
> diff --git a/drivers/gpu/drm/panel/panel-boe-td4320.c b/drivers/gpu/drm/panel/panel-boe-td4320.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..1956daa2c71bc92c94fc76319d841b520407001c
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-boe-td4320.c
> @@ -0,0 +1,247 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright (c) 2024 Barnabas Czeman <barnabas.czeman@mainlining.org>
> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> +// Copyright (c) 2013, The Linux Foundation. All rights reserved.
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +
> +struct boe_td4320 {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct regulator_bulk_data *supplies;
> + struct gpio_desc *reset_gpio;
> +};
> +
> +static const struct regulator_bulk_data boe_td4320_supplies[] = {
> + { .supply = "iovcc" },
> + { .supply = "vsn" },
> + { .supply = "vsp" },
> +};
> +
> +static inline struct boe_td4320 *to_boe_td4320(struct drm_panel *panel)
> +{
> + return container_of(panel, struct boe_td4320, panel);
> +}
> +
> +static void boe_td4320_reset(struct boe_td4320 *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(1000, 2000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(5000, 6000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + msleep(30);
> +}
> +
> +static int boe_td4320_on(struct boe_td4320 *ctx)
> +{
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> +
> + ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xb0, 0x04);
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xd6, 0x00);
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xb8,
> + 0x19, 0x55, 0x00, 0xbe, 0x00, 0x00,
> + 0x00);
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xb9,
> + 0x4d, 0x55, 0x05, 0xe6, 0x00, 0x02,
> + 0x03);
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xba,
> + 0x9b, 0x5b, 0x07, 0xe6, 0x00, 0x13,
> + 0x00);
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xf9,
> + 0x44, 0x3f, 0x00, 0x8d, 0xbf);
> + mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xce,
> + 0x5d, 0x00, 0x0f, 0x1f, 0x2f, 0x3f,
> + 0x4f, 0x5f, 0x6f, 0x7f, 0x8f, 0x9f,
> + 0xaf, 0xbf, 0xcf, 0xdf, 0xef, 0xff,
> + 0x04, 0x00, 0x02, 0x02, 0x42, 0x01,
> + 0x69, 0x5a, 0x40, 0x40, 0x00, 0x00,
> + 0x04, 0xfa, 0x00);
> + mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x00b8);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY,
> + 0x2c);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xb0, 0x03);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x11, 0x00);
> + mipi_dsi_msleep(&dsi_ctx, 96);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0x29, 0x00);
> + mipi_dsi_msleep(&dsi_ctx, 20);
> +
> + return dsi_ctx.accum_err;
> +}
> +
> +static int boe_td4320_off(struct boe_td4320 *ctx)
> +{
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> +
> + ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, 20);
> + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, 120);
> +
> + return dsi_ctx.accum_err;
> +}
> +
> +static int boe_td4320_prepare(struct drm_panel *panel)
> +{
> + struct boe_td4320 *ctx = to_boe_td4320(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(boe_td4320_supplies), ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + boe_td4320_reset(ctx);
> +
> + ret = boe_td4320_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + regulator_bulk_disable(ARRAY_SIZE(boe_td4320_supplies), ctx->supplies);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int boe_td4320_unprepare(struct drm_panel *panel)
> +{
> + struct boe_td4320 *ctx = to_boe_td4320(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + ret = boe_td4320_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + regulator_bulk_disable(ARRAY_SIZE(boe_td4320_supplies), ctx->supplies);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode boe_td4320_mode = {
> + .clock = (1080 + 86 + 2 + 100) * (2340 + 4 + 4 + 60) * 60 / 1000,
> + .hdisplay = 1080,
> + .hsync_start = 1080 + 86,
> + .hsync_end = 1080 + 86 + 2,
> + .htotal = 1080 + 86 + 2 + 100,
> + .vdisplay = 2340,
> + .vsync_start = 2340 + 4,
> + .vsync_end = 2340 + 4 + 4,
> + .vtotal = 2340 + 4 + 4 + 60,
> + .width_mm = 67,
> + .height_mm = 145,
> + .type = DRM_MODE_TYPE_DRIVER,
> +};
> +
> +static int boe_td4320_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + return drm_connector_helper_get_modes_fixed(connector, &boe_td4320_mode);
> +}
> +
> +static const struct drm_panel_funcs boe_td4320_panel_funcs = {
> + .prepare = boe_td4320_prepare,
> + .unprepare = boe_td4320_unprepare,
> + .get_modes = boe_td4320_get_modes,
> +};
> +
> +static int boe_td4320_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct boe_td4320 *ctx;
> + int ret;
> +
> + ctx = devm_drm_panel_alloc(dev, struct boe_td4320, panel,
> + &boe_td4320_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + if (IS_ERR(ctx))
> + return PTR_ERR(ctx);
> +
> + ret = devm_regulator_bulk_get_const(dev,
> + ARRAY_SIZE(boe_td4320_supplies),
> + boe_td4320_supplies,
> + &ctx->supplies);
> + if (ret < 0)
> + return ret;
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Failed to get reset-gpios\n");
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + ctx->panel.prepare_prev_first = true;
> +
> + ret = drm_panel_of_backlight(&ctx->panel);
> + if (ret)
> + return dev_err_probe(dev, ret, "Failed to get backlight\n");
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + drm_panel_remove(&ctx->panel);
> + return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
> + }
> +
> + return 0;
> +}
> +
> +static void boe_td4320_remove(struct mipi_dsi_device *dsi)
> +{
> + struct boe_td4320 *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> + drm_panel_remove(&ctx->panel);
> +}
> +
> +static const struct of_device_id boe_td4320_of_match[] = {
> + { .compatible = "boe,td4320" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, boe_td4320_of_match);
> +
> +static struct mipi_dsi_driver boe_td4320_driver = {
> + .probe = boe_td4320_probe,
> + .remove = boe_td4320_remove,
> + .driver = {
> + .name = "panel-boe-td4320",
> + .of_match_table = boe_td4320_of_match,
> + },
> +};
> +module_mipi_dsi_driver(boe_td4320_driver);
> +
> +MODULE_AUTHOR("Barnabas Czeman <barnabas.czeman@mainlining.org>");
> +MODULE_DESCRIPTION("DRM driver for boe td4320 fhdplus video mode dsi panel");
> +MODULE_LICENSE("GPL");
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
next prev parent reply other threads:[~2025-05-05 7:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-30 19:42 [PATCH v3 0/2] BOE TD4320 panel Barnabás Czémán
2025-04-30 19:42 ` [PATCH v3 1/2] dt-bindings: display: panel: Add BOE TD4320 Barnabás Czémán
2025-04-30 19:42 ` [PATCH v3 2/2] drivers: gpu: drm: " Barnabás Czémán
2025-05-05 7:47 ` Neil Armstrong [this message]
2025-05-05 7:56 ` [PATCH v3 0/2] BOE TD4320 panel Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=22951635-e12e-4db2-9a74-5d5cd991e177@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=airlied@gmail.com \
--cc=barnabas.czeman@mainlining.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=quic_jesszhan@quicinc.com \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®