From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753372AbbJOX6I (ORCPT ); Thu, 15 Oct 2015 19:58:08 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:40123 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751371AbbJOX6F (ORCPT ); Thu, 15 Oct 2015 19:58:05 -0400 From: "Kwok, WingMan" To: Arnd Bergmann CC: "linux-arm-kernel@lists.infradead.org" , "robh+dt@kernel.org" , "pawel.moll@arm.com" , "mark.rutland@arm.com" , "ijc+devicetree@hellion.org.uk" , "galak@codeaurora.org" , KISHON VIJAY ABRAHAM , "Quadros, Roger" , "Karicheri, Muralidharan" , "bhelgaas@google.com" , "ssantosh@kernel.org" , "linux@arm.linux.org.uk" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-pci@vger.kernel.org" Subject: RE: [PATCH v1 1/2] phy: keystone: serdes driver for gbe 10gbe and pcie Thread-Topic: [PATCH v1 1/2] phy: keystone: serdes driver for gbe 10gbe and pcie Thread-Index: AQHRB1V5MngYIIwCjkyrrNOdm+3m/p5s9vgA///+4vCAAGZTAP//3q0g Date: Thu, 15 Oct 2015 23:57:19 +0000 Message-ID: <230CBA6E4B6B6B418E8730AC28E6FC7E04228DF2@DFLE11.ent.ti.com> References: <1444919145-30845-1-git-send-email-w-kwok2@ti.com> <5192855.p6QLDWTiVi@wuerfel> <230CBA6E4B6B6B418E8730AC28E6FC7E04228DB8@DFLE11.ent.ti.com> <9008744.UmMoJzNEVK@wuerfel> In-Reply-To: <9008744.UmMoJzNEVK@wuerfel> Accept-Language: en-US, zh-HK Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [157.170.170.90] Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from base64 to 8bit by mail.home.local id t9FNwDB6016840 Hello, > -----Original Message----- > From: Arnd Bergmann [mailto:arnd@arndb.de] > Sent: Thursday, October 15, 2015 4:53 PM > To: Kwok, WingMan > Cc: linux-arm-kernel@lists.infradead.org; robh+dt@kernel.org; > pawel.moll@arm.com; mark.rutland@arm.com; ijc+devicetree@hellion.org.uk; > galak@codeaurora.org; KISHON VIJAY ABRAHAM; Quadros, Roger; Karicheri, > Muralidharan; bhelgaas@google.com; ssantosh@kernel.org; > linux@arm.linux.org.uk; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linux-pci@vger.kernel.org > Subject: Re: [PATCH v1 1/2] phy: keystone: serdes driver for gbe 10gbe and > pcie > > On Thursday 15 October 2015 20:08:32 Kwok, WingMan wrote: > > > > > > +#define reg_rmw(addr, value, mask) \ > > > > + __raw_writel(((__raw_readl(addr) & (~(mask))) | \ > > > > + (value & (mask))), (addr)) > > > > > > not endian safe, and potentially racy. > > > > > > > will change to > > > > #define reg_rmw(addr, value, mask) \ > > writel(((readl(addr) & (~(mask))) | \ > > (value & (mask))), (addr)) > > Ok, sounds good. Note that if any of this is performance critical, > better use readl_relaxed(), but as long as this is just for setup > code and not for data transfers, staying with readl() as you > suggest is better. > since this is only for initialization, I'll probably stay with readl(). > > > > +static inline void _kserdes_reset_cdr(void __iomem *sregs, int lane) > > > > +{ > > > > + /* toggle signal detect */ > > > > + _kserdes_force_signal_detect_low(sregs, lane); > > > > + mdelay(1); > > > > + _kserdes_force_signal_detect_high(sregs, lane); > > > > +} > > > > > > Can you change the code so you can use msleep(1) here? > > > > > > > will replace delays with usleep_range() > > Ok. > > > > > + > > > > + do { > > > > + mdelay(10); > > > > + memset(lane_down, 0, sizeof(lane_down)); > > > > + > > > > + link_up = _kserdes_check_link_status(dev, sregs, > > > > + pcsr_regmap, lanes, > > > > + lanes_enable, > > > > + current_state, > lane_down); > > > > + > > > > + /* if we did not get link up then wait 100ms > > > > + * before calling it again > > > > + */ > > > > + if (link_up) > > > > + break; > > > > + > > > > + for (i = 0; i < lanes; i++) { > > > > + if ((lanes_enable & (1 << i)) && lane_down[i]) > > > > + dev_dbg(dev, > > > > + "XGE: detected lane down on lane > %d\n", > > > > + i); > > > > + } > > > > + > > > > + if (++retries > 100) > > > > + return -ETIMEDOUT; > > > > + > > > > + } while (!link_up); > > > > > > an more importantly here. Blocking the CPU for over one second is not > good. > > > > > > Any use of mdelay() should have a comment explaining why you cannot use > > > msleep() in that instance. > > > > > > > will replace delays with usleep_range() > > Here you have to be careful with the total runtime. Using usleep_range() > is a good idea, and you can have a particularly wide range, but then you > should changen the timeout condition from number of retries to total > elapsed time like > > unsigned long timeout = jiffies + HZ; /* 1 second maximum */ > do { > ... > > if (link_up) > break; > > if (time_after(jiffies, timeout) > return -ETIMEOUT; > > usleep_range(1000, 50000); > } while (1); > will do. > Arnd Thanks so much for your comments. WingMan ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ¥Šwÿº{.nÇ+‰·¥Š{±þG«�éÿŠ{ayºʇڙë,j­¢f£¢·hš�ï�êÿ‘êçz_è®(­éšŽŠÝ¢j"�ú¶m§ÿÿ¾«þG«�éÿ¢¸?™¨è­Ú&£ø§~�á¶iO•æ¬z·švØ^¶m§ÿÿà ÿ¶ìÿ¢¸?–I¥