Re: [PATCH RFC 2/2] RISC-V: add T-Head vector errata handling

["Stefan O'Rear" <sorear@fastmail.com>]

On Thu, Jun 22, 2023, at 1:39 PM, Heiko Stübner wrote:
> Am Dienstag, 13. Juni 2023, 08:35:53 CEST schrieb Stefan O'Rear:
>> vxrm and vxsat are part of fcsr in 0.7.1, so they should already have been
>> handled by __fstate_save and __fstate_restore, and this code is likely to
>> misbehave (saving the new process's vxrm/vxsat in the old process's save area
>> because float state is swapped before vector state in __switch_to).
>
> I'm not sure I follow your description but may be overlooking or have
> misunderstood something.
>
> Somehow I way to often have trouble resolving CSR addresses, but according
> to openSBI, FCSR has the location of 0x3
> (#define CSR_FCSR 0x003 in include/sbi/riscv_encoding.h)
>
> where CSR_VXSAT and CSR_VXRM are at 0x9 and 0xa respectively.
> (#define CSR_VXSAT 0x9 and  #define CSR_VXRM 0xa)
>
>
> And looking at __fstate_save + __fstate_restore the only CSRs accessed seem
> to be CSR_STATUS and FCSR itself.
>
> I definitly won't claim to be right, but don't see the issue yet.
>
>
> Thanks for a hint
> Heiko

Are you aware of "3.7. Vector Fixed-Point Fields in fcsr" in
riscv-v-spec-0.7.1.pdf?

-s