Re: [PATCH v3 2/5] thermal/drivers: airoha: Generalize probe function

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 11/6/25 23:59, Christian Marangi wrote:
> In preparation for support of Airoha AN7583, generalize the probe
> function to address for the 2 SoC differece.
> 
> Implement a match_data struct where it's possible to define a more
> specific probe and post_probe function and specific thermal ops and
> pllrg protect value.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
>   drivers/thermal/airoha_thermal.c | 102 +++++++++++++++++++++++--------
>   1 file changed, 75 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/thermal/airoha_thermal.c b/drivers/thermal/airoha_thermal.c
> index 01ed49a4887e..864a01fd8fd8 100644
> --- a/drivers/thermal/airoha_thermal.c
> +++ b/drivers/thermal/airoha_thermal.c
> @@ -198,12 +198,23 @@ struct airoha_thermal_priv {
>   	struct regmap *chip_scu;
>   	struct resource scu_adc_res;
>   
> +	u32 pllrg_protect;
> +
>   	struct thermal_zone_device *tz;
>   	int init_temp;
>   	int default_slope;
>   	int default_offset;
>   };
>   
> +struct airoha_thermal_soc_data {
> +	u32 pllrg_protect;
> +
> +	const struct thermal_zone_device_ops *thdev_ops;
> +	int (*probe)(struct platform_device *pdev,
> +		     struct airoha_thermal_priv *priv);
> +	int (*post_probe)(struct platform_device *pdev);

What the post-probe provides compared to calling the corresponding code 
in the probe function ?

> +};
> +
>   static int airoha_get_thermal_ADC(struct airoha_thermal_priv *priv)
>   {
>   	u32 val;
> @@ -220,7 +231,8 @@ static void airoha_init_thermal_ADC_mode(struct airoha_thermal_priv *priv)
>   	regmap_read(priv->chip_scu, EN7581_PLLRG_PROTECT, &pllrg);
>   
>   	/* Give access to thermal regs */
> -	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT, EN7581_SCU_THERMAL_PROTECT_KEY);
> +	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT,
> +		     priv->pllrg_protect);
>   	adc_mux = FIELD_PREP(EN7581_MUX_TADC, EN7581_SCU_THERMAL_MUX_DIODE1);
>   	regmap_write(priv->chip_scu, EN7581_PWD_TADC, adc_mux);
>   
> @@ -228,7 +240,7 @@ static void airoha_init_thermal_ADC_mode(struct airoha_thermal_priv *priv)
>   	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT, pllrg);
>   }
>   
> -static int airoha_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
> +static int en7581_thermal_get_temp(struct thermal_zone_device *tz, int *temp)

Please provide a separate patch before where s/airoha/en7581/

[ ... ]
> +static int en7581_thermal_post_probe(struct platform_device *pdev)
> +{
> +	struct airoha_thermal_priv *priv = platform_get_drvdata(pdev);
> +
> +	/* Enable LOW and HIGH interrupt (if supported) */

Why "(if supported)" ?

> +	regmap_write(priv->map, EN7581_TEMPMONINT,
> +		     EN7581_HOFSINTEN0 | EN7581_LOFSINTEN0);
> +
> +	return 0;
> +}
> +
> +static int airoha_thermal_probe(struct platform_device *pdev)
> +{
> +	const struct airoha_thermal_soc_data *soc_data;
> +	struct airoha_thermal_priv *priv;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	soc_data = device_get_match_data(dev);
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->pllrg_protect = soc_data->pllrg_protect;
> +
> +	if (!soc_data->probe)
> +		return -EINVAL;

Shall the driver check its own code ?
> +	ret = soc_data->probe(pdev, priv);
> +	if (ret)

[ ... ]
> +static const struct airoha_thermal_soc_data en7581_data = {
> +	.pllrg_protect = EN7581_SCU_THERMAL_PROTECT_KEY,
> +	.thdev_ops = &en7581_thdev_ops,
> +	.probe = &en7581_thermal_probe,
> +	.post_probe = &en7581_thermal_post_probe,
	.probe = en7581_thermal_probe,
	.post_probe = en7581_thermal_post_probe,

> +};
> +
>   static const struct of_device_id airoha_thermal_match[] = {
> -	{ .compatible = "airoha,en7581-thermal" },
> +	{ .compatible = "airoha,en7581-thermal", .data = &en7581_data },
>   	{},
>   };
>   MODULE_DEVICE_TABLE(of, airoha_thermal_match);


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog