From: Florian Fainelli <f.fainelli@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy@broadcom.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Subject: Re: [PATCH v2 0/4] USB support for Broadcom NSP SoC
Date: Thu, 26 Jan 2017 09:27:00 -0800 [thread overview]
Message-ID: <241009ca-4b34-b160-2de1-4752d3ff114b@gmail.com> (raw)
In-Reply-To: <588A16FA.50507@ti.com>
On 01/26/2017 07:34 AM, Kishon Vijay Abraham I wrote:
>
>
> On Tuesday 17 January 2017 09:44 PM, Yendapally Reddy Dhananjaya Reddy wrote:
>> This patch set contains the usb support for Broadcom NSP SoC. The
>> usb3 phy is internal to the SoC and is accessed through mdio interface.
>> The mdio interface can be used to access either internal usb3 phy or
>> external ethernet phy using a multiplexer.
>>
>> The first patch provides the documentation details for usb3 phy. The
>> second patch provides the changes to the mdio bus driver. The third
>> patch provides the phy driver and fourth patch provides the enable
>> method for usb.
>
> merged the 1st and 4th patch to linux-phy.
You mean 1st and 3rd here, right? 4th is a Device Tree change that I
should take, and Patch 2 should be merged by David.
What branch in your tree should we be looking at?
>
> Thanks
> Kishon
>
>>
>> This patch series has been tested on NSP bcm958625HR board.
>> This patch series is based on v4.10.0-rc3 and is available from
>> github-repo: https://github.com/Broadcom/cygnus-linux.git
>> branch:nsp-usb-v2
>>
>> Changes in v2:
>> * Remove separate nsp mux driver as suggested by Andrew Lunn
>> * Addressed comments from Scott and Rob
>>
>> Yendapally Reddy Dhananjaya Reddy (4):
>> dt-bindings: phy: Add documentation for NSP USB3 PHY
>> net: phy: Initialize mdio clock at probe function
>> phy: Add USB3 PHY support for Broadcom NSP SoC
>> arm: dts: nsp: Add USB nodes to device tree
>>
>> .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 +++++
>> arch/arm/boot/dts/bcm-nsp.dtsi | 56 +++++++
>> arch/arm/boot/dts/bcm958625k.dts | 16 ++
>> drivers/net/phy/mdio-bcm-iproc.c | 6 +-
>> drivers/phy/Kconfig | 8 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-bcm-nsp-usb3.c | 176 +++++++++++++++++++++
>> 7 files changed, 298 insertions(+), 4 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
>> create mode 100644 drivers/phy/phy-bcm-nsp-usb3.c
>>
--
Florian
next prev parent reply other threads:[~2017-01-26 17:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-17 16:14 Yendapally Reddy Dhananjaya Reddy
2017-01-17 16:14 ` [PATCH v2 1/4] dt-bindings: phy: Add documentation for NSP USB3 PHY Yendapally Reddy Dhananjaya Reddy
2017-01-19 19:26 ` Rob Herring
2017-01-17 16:14 ` [PATCH v2 2/4] net: phy: Initialize mdio clock at probe function Yendapally Reddy Dhananjaya Reddy
2017-01-19 19:26 ` Florian Fainelli
2017-02-01 22:08 ` Florian Fainelli
2017-01-17 16:14 ` [PATCH v2 3/4] phy: Add USB3 PHY support for Broadcom NSP SoC Yendapally Reddy Dhananjaya Reddy
2017-02-02 6:48 ` Rafał Miłecki
2017-02-03 16:05 ` Jon Mason
2017-01-17 16:14 ` [PATCH v2 4/4] arm: dts: nsp: Add USB nodes to device tree Yendapally Reddy Dhananjaya Reddy
2017-01-26 15:34 ` [PATCH v2 0/4] USB support for Broadcom NSP SoC Kishon Vijay Abraham I
2017-01-26 17:27 ` Florian Fainelli [this message]
2017-01-27 7:39 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=241009ca-4b34-b160-2de1-4752d3ff114b@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=jonmason@broadcom.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=yendapally.reddy@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome