mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Goldwyn Rodrigues <rgoldwyn@gmail.com>
To: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	Nils Carlson <nils.carlson@ericsson.com>,
	David Brownell <david-b@pacbell.net>
Subject: Re: [PATCH] hpet: hpet driver periodic timer setup bug fixes
Date: Thu, 27 Aug 2009 14:17:47 -0500	[thread overview]
Message-ID: <241c7a2b0908271217u178edd5eu1ec45923e527012f@mail.gmail.com> (raw)
In-Reply-To: <20090810220503.GA29239@linux-os.sc.intel.com>

Hi,

One comment on this patch.

On Mon, Aug 10, 2009 at 5:05 PM, Pallipadi,
Venkatesh<venkatesh.pallipadi@intel.com> wrote:
> From: Nils Carlson <nils.carlson@ericsson.com>
>
> The periodic interrupt from drivers/char/hpet.c does not work correctly,
> both when using the periodic capability of the hardware and while
> emulating the periodic interrupt (when hardware does not support
> periodic mode).
>
> With timers capable of periodic interrupts, the comparator field is first
> set with the period value followed by set of hidden accumulator,
> which has the side effect of overwriting the comparator value. This
> results in wrong periodicity for the interrupts. For,
> periodic interrupts to work, following steps are necessary, in that order.
> * Set config with Tn_VAL_SET_CNF bit
> * Write to hidden accumulator, the value written is the time when the
>  first interrupt should be generated
> * Write compartor with period interval for subsequent interrupts
> (http://www.intel.com/hardwaredesign/hpetspec_1.pdf )
>
> When emulating periodic timer with timers not capable of periodic
> interrupt, driver is adding the period to counter value instead of
> comparator value, which causes slow drift when using this emulation.
>
> Also, driver seems to add hpetp->hp_delta both while setting up
> periodic interrupt and while emulating periodic interrupts with timers
> not capable of doing periodic interrupts. This hp_delta will result in
> slower than expected interrupt rate and should not be used while setting
> the interval.
>
> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
> Signed-off-by: Nils Carlson <nils.carlson@ericsson.com>
> ---
>  drivers/char/hpet.c |   21 ++++++++++++---------
>  1 files changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
> index 4a9f349..70a770a 100644
> --- a/drivers/char/hpet.c
> +++ b/drivers/char/hpet.c
> @@ -166,9 +166,8 @@ static irqreturn_t hpet_interrupt(int irq, void *data)
>                unsigned long m, t;
>
>                t = devp->hd_ireqfreq;
> -               m = read_counter(&devp->hd_hpet->hpet_mc);
> -               write_counter(t + m + devp->hd_hpets->hp_delta,
> -                             &devp->hd_timer->hpet_compare);
> +               m = read_counter(&devp->hd_timer->hpet_compare);
> +               write_counter(t + m, &devp->hd_timer->hpet_compare);
>        }
>
>        if (devp->hd_flags & HPET_SHARED_IRQ)
> @@ -504,21 +503,25 @@ static int hpet_ioctl_ieon(struct hpet_dev *devp)
>        g = v | Tn_32MODE_CNF_MASK | Tn_INT_ENB_CNF_MASK;
>
>        if (devp->hd_flags & HPET_PERIODIC) {
> -               write_counter(t, &timer->hpet_compare);
>                g |= Tn_TYPE_CNF_MASK;
> -               v |= Tn_TYPE_CNF_MASK;
> -               writeq(v, &timer->hpet_config);
> -               v |= Tn_VAL_SET_CNF_MASK;
> +               v |= Tn_TYPE_CNF_MASK | Tn_VAL_SET_CNF_MASK;
>                writeq(v, &timer->hpet_config);
>                local_irq_save(flags);
>
> -               /* NOTE:  what we modify here is a hidden accumulator
> +               /*
> +                * NOTE: First we modify the hidden accumulator
>                 * register supported by periodic-capable comparators.
>                 * We never want to modify the (single) counter; that
> -                * would affect all the comparators.
> +                * would affect all the comparators. The value written
> +                * is the counter value when the first interrupt is due.
>                 */
>                m = read_counter(&hpet->hpet_mc);
>                write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
> +               /*
> +                * Then we modify the comparator, indicating the period
> +                * for subsequent interrupt.
> +                */
> +               write_counter(t, &timer->hpet_compare);
>        } else {
>                local_irq_save(flags);
>                m = read_counter(&hpet->hpet_mc);

Shouldn't
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
be deleted if we are doing
write_counter(t, &timer->hpet_compare);
?

Regards,

-- 
Goldwyn

  parent reply	other threads:[~2009-08-27 19:25 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-10 22:05 Pallipadi, Venkatesh
2009-08-11  4:03 ` Andrew Morton
2009-08-11 18:07   ` Pallipadi, Venkatesh
2009-08-27 19:17 ` Goldwyn Rodrigues [this message]
2009-08-28  6:59   ` Nils Carlson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=241c7a2b0908271217u178edd5eu1ec45923e527012f@mail.gmail.com \
    --to=rgoldwyn@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=david-b@pacbell.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nils.carlson@ericsson.com \
    --cc=venkatesh.pallipadi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®