From: Hans de Goede <hansg@kernel.org>
To: ChunAn Wu <an.wu@canonical.com>,
linux-serial@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, markus.probst@posteo.de,
gregkh@linuxfoundation.org, jirislaby@kernel.org,
ilpo.jarvinen@linux.intel.com, mpearson-lenovo@squebb.ca,
derekjohn.clark@gmail.com
Subject: Re: [PATCH v2 1/3] serdev: handle devices without an ACPI or device tree node
Date: Wed, 21 Oct 2026 16:32:58 +0200 [thread overview]
Message-ID: <250bded6-2a51-457d-9bf2-24c299dbd7a9@kernel.org> (raw)
In-Reply-To: <20261021092124.2306053-1-an.wu@canonical.com>
Hi,
On 21-Oct-26 11:21, ChunAn Wu wrote:
> Driver-created serdev clients may lack an ACPI companion or device tree
> node.
>
> Add a creator-supplied name for these clients. Use it as a serial
> modalias fallback and to match a serdev driver of the same name. Keep
> returning -ENODEV for unnamed clients.
>
> Signed-off-by: ChunAn Wu <an.wu@canonical.com>
For v3 of this series please include a cover-letter and explain
why this series is an improvement over the` existing situation.
The dell-uart-backlight and lenovo-yoga-tab2-pro-1380-fastcharger
drivers are both pretty special cases and here you are adding
a chunk of code to the serdev-core for those special cases,
so I wonder: why?
The current manual attach approach taking in these 2 special
drivers works fine.
What does this new approach gain us ?
Also if you are going to do this may I suggest looking at doing
some sort of of-compatible matching based on a compatible string
inside a swnode ? I do not know what that would look like but
that is something which seems like it might be generally useful
also outside these 2 special cases.
Regards,
Hans
> ---
> drivers/tty/serdev/core.c | 36 ++++++++++++++++++++++++++++++------
> include/linux/serdev.h | 31 +++++++++++++++++++++++++++++++
> 2 files changed, 61 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
> index 7500efcdfc21..8354a4688fd8 100644
> --- a/drivers/tty/serdev/core.c
> +++ b/drivers/tty/serdev/core.c
> @@ -29,13 +29,21 @@ static DEFINE_IDA(ctrl_ida);
> static ssize_t modalias_show(struct device *dev,
> struct device_attribute *attr, char *buf)
> {
> + const struct serdev_device *serdev = to_serdev_device(dev);
> int len;
>
> len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
> if (len != -ENODEV)
> return len;
>
> - return of_device_modalias(dev, buf, PAGE_SIZE);
> + len = of_device_modalias(dev, buf, PAGE_SIZE);
> + if (len != -ENODEV)
> + return len;
> +
> + if (!serdev->name[0])
> + return -ENODEV;
> +
> + return sysfs_emit(buf, "%s%s\n", SERDEV_MODULE_PREFIX, serdev->name);
> }
> static DEVICE_ATTR_RO(modalias);
>
> @@ -47,15 +55,22 @@ ATTRIBUTE_GROUPS(serdev_device);
>
> static int serdev_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
> {
> + const struct serdev_device *serdev = to_serdev_device(dev);
> int rc;
>
> - /* TODO: platform modalias */
> -
> rc = acpi_device_uevent_modalias(dev, env);
> if (rc != -ENODEV)
> return rc;
>
> - return of_device_uevent_modalias(dev, env);
> + rc = of_device_uevent_modalias(dev, env);
> + if (rc != -ENODEV)
> + return rc;
> +
> + if (!serdev->name[0])
> + return -ENODEV;
> +
> + add_uevent_var(env, "MODALIAS=%s%s", SERDEV_MODULE_PREFIX, serdev->name);
> + return 0;
> }
>
> static void serdev_device_release(struct device *dev)
> @@ -88,14 +103,23 @@ static const struct device_type serdev_ctrl_type = {
>
> static int serdev_device_match(struct device *dev, const struct device_driver *drv)
> {
> + const struct serdev_device *serdev;
> +
> if (!is_serdev_device(dev))
> return 0;
>
> - /* TODO: platform matching */
> if (acpi_driver_match_device(dev, drv))
> return 1;
>
> - return of_driver_match_device(dev, drv);
> + if (of_driver_match_device(dev, drv))
> + return 1;
> +
> + /* Fall back to the name set by the creator of the device */
> + serdev = to_serdev_device(dev);
> + if (!serdev->name[0])
> + return 0;
> +
> + return strcmp(serdev->name, drv->name) == 0;
> }
>
> /**
> diff --git a/include/linux/serdev.h b/include/linux/serdev.h
> index b6c3d957ec15..26baa0321eef 100644
> --- a/include/linux/serdev.h
> +++ b/include/linux/serdev.h
> @@ -8,6 +8,7 @@
> #include <linux/types.h>
> #include <linux/device.h>
> #include <linux/iopoll.h>
> +#include <linux/string.h>
> #include <linux/uaccess.h>
> #include <linux/termios.h>
> #include <linux/delay.h>
> @@ -19,6 +20,10 @@ struct serdev_device;
> * serdev device structures
> */
>
> +/* Large enough to hold the KBUILD_MODNAME of any serdev client driver */
> +#define SERDEV_NAME_SIZE 40
> +#define SERDEV_MODULE_PREFIX "serial:"
> +
> /**
> * struct serdev_device_ops - Callback operations for a serdev device
> * @receive_buf: Function called with data received from device;
> @@ -35,6 +40,9 @@ struct serdev_device_ops {
> * struct serdev_device - Basic representation of an serdev device
> * @dev: Driver model representation of the device.
> * @nr: Device number on serdev bus.
> + * @name: Name of the device, set by its creator, empty for devices
> + * which are enumerated from firmware, see
> + * serdev_device_set_name().
> * @ctrl: serdev controller managing this device.
> * @ops: Device operations.
> * @write_comp: Completion used by serdev_device_write() internally
> @@ -43,6 +51,7 @@ struct serdev_device_ops {
> struct serdev_device {
> struct device dev;
> int nr;
> + char name[SERDEV_NAME_SIZE];
> struct serdev_controller *ctrl;
> const struct serdev_device_ops *ops;
> struct completion write_comp;
> @@ -135,6 +144,28 @@ static inline void serdev_device_set_client_ops(struct serdev_device *serdev,
> serdev->ops = ops;
> }
>
> +/**
> + * serdev_device_set_name() - set the name of a serdev device
> + * @serdev: serdev device.
> + * @name: non-empty name to use, typically KBUILD_MODNAME of the client
> + * driver.
> + *
> + * A serdev device is identified by its ACPI companion, by its device tree
> + * node, or by a name set by its creator. Serdev devices which are
> + * instantiated by a driver rather than by firmware have neither of the
> + * former, so they must set a name before serdev_device_add() to be
> + * identifiable. Doing so gives them a SERDEV_MODULE_PREFIX modalias and
> + * makes them match a serdev device driver of the same name.
> + *
> + * Devices enumerated from firmware have no name and keep deriving their
> + * modalias and their driver match from firmware only.
> + */
> +static inline void serdev_device_set_name(struct serdev_device *serdev,
> + const char *name)
> +{
> + strscpy(serdev->name, name);
> +}
> +
> static inline
> void *serdev_controller_get_drvdata(const struct serdev_controller *ctrl)
> {
>
> base-commit: 9e947d96915af63e28896caae85a81b74855621b
next prev parent reply other threads:[~2026-10-21 14:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 9:21 ChunAn Wu
2026-10-21 9:21 ` [PATCH v2 2/3] platform/x86: dell-uart-backlight: Bind through normal serdev matching ChunAn Wu
2026-10-21 9:21 ` [PATCH v2 3/3] platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: " ChunAn Wu
2026-10-21 13:39 ` [PATCH v2 1/3] serdev: handle devices without an ACPI or device tree node Markus Probst
2026-10-21 14:32 ` Hans de Goede [this message]
2026-10-21 15:08 ` Markus Probst
2026-10-21 18:07 ` Hans de Goede
2026-10-21 18:14 ` Markus Probst
2026-10-22 3:10 ` An Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=250bded6-2a51-457d-9bf2-24c299dbd7a9@kernel.org \
--to=hansg@kernel.org \
--cc=an.wu@canonical.com \
--cc=derekjohn.clark@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=markus.probst@posteo.de \
--cc=mpearson-lenovo@squebb.ca \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®