Hi, Jonathan and Jean-Baptiste, On Mon, 2026-09-07 at 11:52 +0000, Jean-Baptiste Maneyrol wrote: > [Some people who received this message don't often get email from > jean-baptiste.maneyrol@tdk.com. Learn why this is important at > https://aka.ms/LearnAboutSenderIdentification ] > > > The device supports indirect register access to different banks. A > > specific routine needs to be followed when accessing the registers > > in > > another bank as documented in the datasheet (section 13). This is > > required for accessing registers configured via the user and > > implementing buffer support. > > > > Datasheet: > > https://www.invensense.tdk.com/en-us/products/3-axis/icm-42370-p > > Datasheet: > > https://urldefense.com/v3/__https://www.lcsc.com/product-detail/C5129967.html__;!!FtrhtPsWDhZ6tw!CMTPpmwpQnn9q5feyPtbKfDlZZxlAh6FLT3KngBIAt4pGu5iF9cjUawWbxpNVF6__BzwZo0XM8x2ABrLJ4I1epLGPQXws4rTlA$[lcsc[.]com] > > Assisted-by: LLM > > Signed-off-by: Kanak Shilledar > > --- > > LLM was used to improve the mreg_check function to include the case > > where the sensor is in a POWER OFF or LOW POWER mode to utilize the > > RC > > oscillator for initiating the bank access. > > --- > > drivers/iio/imu/inv_icm42607/inv_icm42607.h      |  29 ++++++ > > drivers/iio/imu/inv_icm42607/inv_icm42607_core.c | 108 > > ++++++++++++++++++++++- > > 2 files changed, 135 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h > > b/drivers/iio/imu/inv_icm42607/inv_icm42607.h > > index a183a8566617..a522850e0268 100644 > > --- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h > > [...] > > Hello Kanak, > > for accessing MREG registers I strongly recommend to create a new > regmap > structure for handling this access. This way, you can use the created > regmap > to handle all registers access without having to check each time you > access > a register if it is a normal or an MREG register. Having dedicated > function > is very error prone. > > You can have a look inside inv_icm45600 driver that have the same > kind of MREG > registers and is using a regmap for abstracting the access. > > Thanks, > JB I will rewrite this bank access patch to match it similar to how it is done in the inv_icm45600 driver. Thanks and Regards, Kanak Shilledar