Re: [PATCH v1 1/3] dt-bindings: net: convert emac_rockchip.txt to YAML

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 31/03/2022 18:14, Johan Jonker wrote:
> Convert emac_rockchip.txt to YAML.
> 
> Changes against original bindings:
>   Add mdio sub node.

I see you replaced phy phandle with mdio node, but is it supported by
the driver? arc_emac_probe() seems to look for "phy".

> 
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>  .../devicetree/bindings/net/emac_rockchip.txt |  52 --------
>  .../bindings/net/emac_rockchip.yaml           | 112 ++++++++++++++++++
>  2 files changed, 112 insertions(+), 52 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/emac_rockchip.txt
>  create mode 100644 Documentation/devicetree/bindings/net/emac_rockchip.yaml

rockchip,emac.yaml

> 
> diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
> deleted file mode 100644
> index 05bd7dafc..000000000
> --- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
> -
> -Required properties:
> -- compatible: should be "rockchip,<name>-emac"
> -   "rockchip,rk3036-emac": found on RK3036 SoCs
> -   "rockchip,rk3066-emac": found on RK3066 SoCs
> -   "rockchip,rk3188-emac": found on RK3188 SoCs
> -- reg: Address and length of the register set for the device
> -- interrupts: Should contain the EMAC interrupts
> -- rockchip,grf: phandle to the syscon grf used to control speed and mode
> -  for emac.
> -- phy: see ethernet.txt file in the same directory.
> -- phy-mode: see ethernet.txt file in the same directory.
> -
> -Optional properties:
> -- phy-supply: phandle to a regulator if the PHY needs one
> -
> -Clock handling:
> -- clocks: Must contain an entry for each entry in clock-names.
> -- clock-names: Shall be "hclk" for the host clock needed to calculate and set
> -  polling period of EMAC and "macref" for the reference clock needed to transfer
> -  data to and from the phy.
> -
> -Child nodes of the driver are the individual PHY devices connected to the
> -MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
> -
> -Examples:
> -
> -ethernet@10204000 {
> -	compatible = "rockchip,rk3188-emac";
> -	reg = <0xc0fc2000 0x3c>;
> -	interrupts = <6>;
> -	mac-address = [ 00 11 22 33 44 55 ];
> -
> -	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
> -	clock-names = "hclk", "macref";
> -
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
> -
> -	rockchip,grf = <&grf>;
> -
> -	phy = <&phy0>;
> -	phy-mode = "rmii";
> -	phy-supply = <&vcc_rmii>;
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	phy0: ethernet-phy@0 {
> -	      reg = <1>;
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.yaml b/Documentation/devicetree/bindings/net/emac_rockchip.yaml
> new file mode 100644
> index 000000000..03173fa7b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/emac_rockchip.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/emac_rockchip.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
> +
> +maintainers:
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk3036-emac
> +      - rockchip,rk3066-emac
> +      - rockchip,rk3188-emac
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    items:
> +      - description: host clock
> +      - description: reference clock
> +      - description: mac TX/RX clock
> +
> +  clock-names:
> +    minItems: 2
> +    items:
> +      - const: hclk
> +      - const: macref
> +      - const: macclk

This is also a change, mention it briefly in the commit msg.

> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon GRF used to control speed and mode for the EMAC.
> +
> +  phy-supply:
> +    description:
> +      Phandle to a regulator if the PHY needs one.
> +
> +  mdio:
> +    $ref: mdio.yaml#
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - rockchip,grf

phy-handle and phy-mode. Probably mdio as well?

> +
> +allOf:
> +  - $ref: "ethernet-controller.yaml#"

Best regards,
Krzysztof