From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752979AbaKZViw (ORCPT ); Wed, 26 Nov 2014 16:38:52 -0500 Received: from bear.ext.ti.com ([192.94.94.41]:34211 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751240AbaKZVit (ORCPT ); Wed, 26 Nov 2014 16:38:49 -0500 From: Dave Gerlach To: , , , CC: Tony Lindgren , Paul Walmsley , Benoit Cousson , Kevin Hilman , Ohad Ben-Cohen , Suman Anna , Dave Gerlach Subject: [RFC PATCH 1/3] Documentation: dt: add ti,am3353-wkup-m3-ipc bindings Date: Wed, 26 Nov 2014 15:38:08 -0600 Message-ID: <25c3f49c4f5acb4a3180a3f3481dee467eb3a2b7.1417029919.git.d-gerlach@ti.com> X-Mailer: git-send-email 2.1.0 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add the device tree bindings document for ti,am3353-wkup-m3-ipc which is used by the wkup_m3_ipc driver. Signed-off-by: Dave Gerlach --- .../devicetree/bindings/soc/ti/wkup_m3_ipc.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt new file mode 100644 index 0000000..ceb6acf --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt @@ -0,0 +1,41 @@ +Wakeup M3 IPC Driver +===================== + +TI AMx3 family of devices use a Cortex M3 co-processor to help with various +low power tasks that cannot be controlled from the MPU like suspend/resume +and certain deep C-states for CPU Idle. Once the wkup_m3_ipc driver uses the +wkup_m3_rproc driver to boot the wkup_m3, it handles communication with the +CM3 using IPC registers present in the SoC's control module and a mailbox. +The wkup_m3_ipc exposes an API to allow the SoC PM code to execute specific +PM tasks. + +Wkup M3 Device Node: +==================== +A wkup_m3_ipc device node is used to represent a wakeup M3 IP instance within +an SoC. The sub-mailboxes are represented as child node of this parent node. + +Required properties: +-------------------- +- compatible: Should be "ti,am3353-wkup-m3-ipc" for AM33xx SoCs +- reg: Contains the wkup_m3 register address ranges for + ipc-regs. +- reg-names: Name for ipc-regs given above +- interrupts: Contains the interrupt information for the wkup_m3 + interrupt that signals the MPU. +- ti,rproc: Phandle to the wkup_m3 rproc node so the IPC driver + can boot it. +- mboxes: Phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + +Example: +-------- +/* AM33xx */ +wkup_m3_ipc: wkup_m3_ipc@44e11324 { + compatible = "ti,am3353-wkup-m3-ipc"; + reg = <0x44e11324 0x0024>; + reg-names = "ipc_regs"; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; +}; -- 2.1.0