mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Oleksandr Natalenko <oleksandr@natalenko.name>
To: Eugene Shalygin <eugene.shalygin@gmail.com>
Cc: andy.shevchenko@gmail.com, pauk.denis@gmail.com,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org
Subject: Re: [ASUS EC Sensors V6 v6 0/3]
Date: Mon, 17 Jan 2022 08:21:55 +0100	[thread overview]
Message-ID: <2613447.mvXUDI8C0e@natalenko.name> (raw)
In-Reply-To: <20220116201843.2301438-1-eugene.shalygin@gmail.com>

Hello.

On neděle 16. ledna 2022 21:18:38 CET Eugene Shalygin wrote:
> This patchset replaces the HWMON asus_wmi_ec_sensors driver with
> an implementation that does not use WMI but queries the embedded
> controller directly.
> 
> That provides two enhancements: sensor reading became quicker (on some
> systems or kernel configuration it took almost a full second to read
> all the sensors, that transfers less than 15 bytes of data), the driver
> became more fexible. The driver now relies on ACPI mutex to lock access
> to the EC, in the same way as the WMI DSDT code does.
> 
> Changes in v6:
>  - Fixed hwmon device name replacing dashes with underscores.
>  - Removed module verion.
>  - Fixed condition for asus_wmi_ec_Sensors in KBuild.

For the series:

Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>

> Changes in v5:
>  - Place the sensors bitset directly into the driver_data field of the
>          dmi_system_id struct.
>  - Replace doc comments with regular ones.
> 
> Changes in v4:
>  - Deprecate the wmi driver rather than removing it.
> 
> Changes in v3:
>  - Remove BIOS version checks and BIOS version dependent mutex path.
> 
> Changes in v2:
>  - Replace sensor flags enum with bitset
>  - Replace module init/probe functions with module_platform_driver_probe
>    and ask the platform drivers framework to load the driver when ACPI
>    EC is found (ACPI ID "PNP0C09").
>  - Extend board data with BIOS version attribute for the mutex path to be
>    BIOS version dependent.
>  - Add module parameter to override the mutex path.
> 
> Eugene Shalygin (3):
>   hwmon: (asus-ec-sensors) add driver for ASUS EC
>   hwmon: (asus-ec-sensors) update documentation
>   hwmon: deprecate asis_wmi_ec_sensors driver
> 
>  Documentation/hwmon/asus_ec_sensors.rst     |  51 ++
>  Documentation/hwmon/asus_wmi_ec_sensors.rst |  38 --
>  MAINTAINERS                                 |   6 +
>  drivers/hwmon/Kconfig                       |  16 +-
>  drivers/hwmon/Makefile                      |   1 +
>  drivers/hwmon/asus-ec-sensors.c             | 690 ++++++++++++++++++++
>  6 files changed, 763 insertions(+), 39 deletions(-)
>  create mode 100644 Documentation/hwmon/asus_ec_sensors.rst
>  delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst
>  create mode 100644 drivers/hwmon/asus-ec-sensors.c

Thanks.

-- 
Oleksandr Natalenko (post-factum)



  parent reply	other threads:[~2022-01-17  7:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-16 20:18 Eugene Shalygin
2022-01-16 20:18 ` [ASUS EC Sensors V6 v6 1/3] hwmon: (asus-ec-sensors) add driver for ASUS EC Eugene Shalygin
2022-01-16 20:18 ` [ASUS EC Sensors V6 v6 2/3] hwmon: (asus-ec-sensors) update documentation Eugene Shalygin
2022-01-16 20:18 ` [ASUS EC Sensors V6 v6 3/3] hwmon: deprecate asis_wmi_ec_sensors driver Eugene Shalygin
2022-01-18 16:02   ` Guenter Roeck
2022-01-17  7:21 ` Oleksandr Natalenko [this message]
2022-01-18  2:01 ` [ASUS EC Sensors V6 v6 0/3] Eugene Shalygin
2022-01-18 16:03   ` Guenter Roeck
2022-01-18 16:57     ` Eugene Shalygin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2613447.mvXUDI8C0e@natalenko.name \
    --to=oleksandr@natalenko.name \
    --cc=andy.shevchenko@gmail.com \
    --cc=eugene.shalygin@gmail.com \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=pauk.denis@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome