From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765190AbYCDRWo (ORCPT ); Tue, 4 Mar 2008 12:22:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1764862AbYCDRWS (ORCPT ); Tue, 4 Mar 2008 12:22:18 -0500 Received: from sd-green-dreamhost-133.dreamhost.com ([208.97.187.133]:38338 "EHLO webmail1.sd.dreamhost.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1763722AbYCDRWR (ORCPT ); Tue, 4 Mar 2008 12:22:17 -0500 X-Greylist: delayed 441 seconds by postgrey-1.27 at vger.kernel.org; Tue, 04 Mar 2008 12:22:17 EST Message-ID: <26349.208.97.187.133.1204650893.squirrel@mail.losgandia.com> Date: Tue, 4 Mar 2008 09:14:53 -0800 (PST) Subject: PROBLEM: NUDAM (USB-485) nowaday not detected by pl2303 module From: rafa400@losgandia.com To: linux-kernel@vger.kernel.org User-Agent: SquirrelMail/1.4.10a MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org [1.] new NUDAM (USB-485) converter not recogniced by pl2303. Little change required. [2.] Until now NUDAM USB to RS-485/422 RS232 converter was detected by USB system and pl2303 module working fine in my Debian as /dev/ttyUSB0 # dmesg .... usb 5-1.3: new full speed USB device using ehci_hcd and address 17 usb 5-1.3: configuration #1 chosen from 1 choice pl2303 5-1.3:1.0: pl2303 converter detected usb 5-1.3: pl2303 converter now attached to ttyUSB0 # lsusb Bus 005 Device 017: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port They changed USB ID and now its like: # lsusb Bus 005 Device 016: ID 0b63:6530 ADLink Technology, Inc. but this ID is not detected by PD2303 module. a little change in pl2303 solve the problem [3.] pl2303 NUDAM USB 485 [4.] Linux version 2.6.24-nudam (2.6.24-4) (root@rp022) (gcc version 4.2.3 20080114 (prerelease) (Debian 4.2.2-7)) #1 SMP Mon Mar 3 12:02:41 CET 2008 [5.] not required [6.] not required [7.] not required [X.] Other notes, patches, fixes, workarounds: I made the tribial changes in: drivers/usb/serial/pl2303.c drivers/usb/serial/pl2303.h adding de new USB ID 0b63:6530 to the existing arrays as needed recompile kernel, etc,etc. and it works fine again. Please include this in newer versions if it is possible. Rafael Gandia-Castello