From: He Rongguang <herongguang@linux.alibaba.com>
To: trenn@suse.com, shuah@kernel.org, jwyatt@redhat.com,
jkacur@redhat.com, wyes.karny@amd.com
Cc: linux-kernel@vger.kernel.org, shannon.zhao@linux.alibaba.com,
linux-pm@vger.kernel.org
Subject: [PATCH] cpupower: fix TSC MHz calculation for Mperf monitor
Date: Thu, 28 Nov 2024 17:50:45 +0800 [thread overview]
Message-ID: <269b8bb2-85b5-4cc9-9354-a1270f2eed35@linux.alibaba.com> (raw)
Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7)
changes TSC counter reads to per cpu, but left time diff global (from
start of all cpus to end of all cpus), thus diff(time) is too large for
a cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus
`cpupower monitor` showing far less than actual cpu realtime frequency.
Fix this by making timediff also per cpu.
/proc/cpuinfo shows frequency:
cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz'
...
processor : 171
cpu MHz : 4108.498
...
before fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00
after fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00
Fixes: c2adb1877b76f ("cpupower: Make TSC read per CPU for Mperf monitor")
Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
---
.../cpupower/utils/idle_monitor/mperf_monitor.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
index ae6af354a81d..08a399b0be28 100644
--- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
@@ -33,7 +33,7 @@ static int mperf_get_count_percent(unsigned int
self_id, double *percent,
unsigned int cpu);
static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
unsigned int cpu);
-static struct timespec time_start, time_end;
+static struct timespec *time_start, *time_end;
static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = {
{
@@ -174,7 +174,7 @@ static int mperf_get_count_percent(unsigned int id,
double *percent,
dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
mperf_cstates[id].name, mperf_diff, tsc_diff);
} else if (max_freq_mode == MAX_FREQ_SYSFS) {
- timediff = max_frequency * timespec_diff_us(time_start, time_end);
+ timediff = max_frequency * timespec_diff_us(time_start[cpu],
time_end[cpu]);
*percent = 100.0 * mperf_diff / timediff;
dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n",
mperf_cstates[id].name, mperf_diff, timediff);
@@ -207,7 +207,7 @@ static int mperf_get_count_freq(unsigned int id,
unsigned long long *count,
if (max_freq_mode == MAX_FREQ_TSC_REF) {
/* Calculate max_freq from TSC count */
tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu];
- time_diff = timespec_diff_us(time_start, time_end);
+ time_diff = timespec_diff_us(time_start[cpu], time_end[cpu]);
max_frequency = tsc_diff / time_diff;
}
@@ -226,9 +226,8 @@ static int mperf_start(void)
{
int cpu;
- clock_gettime(CLOCK_REALTIME, &time_start);
-
for (cpu = 0; cpu < cpu_count; cpu++) {
+ clock_gettime(CLOCK_REALTIME, &time_start[cpu]);
mperf_get_tsc(&tsc_at_measure_start[cpu]);
mperf_init_stats(cpu);
}
@@ -243,9 +242,9 @@ static int mperf_stop(void)
for (cpu = 0; cpu < cpu_count; cpu++) {
mperf_measure_stats(cpu);
mperf_get_tsc(&tsc_at_measure_end[cpu]);
+ clock_gettime(CLOCK_REALTIME, &time_end[cpu]);
}
- clock_gettime(CLOCK_REALTIME, &time_end);
return 0;
}
@@ -349,6 +348,8 @@ struct cpuidle_monitor *mperf_register(void)
aperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
tsc_at_measure_start = calloc(cpu_count, sizeof(unsigned long long));
tsc_at_measure_end = calloc(cpu_count, sizeof(unsigned long long));
+ time_start = calloc(cpu_count, sizeof(struct timespec));
+ time_end = calloc(cpu_count, sizeof(struct timespec));
mperf_monitor.name_len = strlen(mperf_monitor.name);
return &mperf_monitor;
}
@@ -361,6 +362,8 @@ void mperf_unregister(void)
free(aperf_current_count);
free(tsc_at_measure_start);
free(tsc_at_measure_end);
+ free(time_start);
+ free(time_end);
free(is_valid);
}
--
2.43.0
next reply other threads:[~2024-11-28 9:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-28 9:50 He Rongguang [this message]
2024-12-02 2:21 ` He Rongguang
2024-12-10 0:43 ` Shuah Khan
2024-12-11 3:22 ` He Rongguang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=269b8bb2-85b5-4cc9-9354-a1270f2eed35@linux.alibaba.com \
--to=herongguang@linux.alibaba.com \
--cc=jkacur@redhat.com \
--cc=jwyatt@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=shannon.zhao@linux.alibaba.com \
--cc=shuah@kernel.org \
--cc=trenn@suse.com \
--cc=wyes.karny@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®