Re: [PATCH v4 00/15] Switchtec NTB Support

[Logan Gunthorpe <logang@deltatee.com>]

Great! Thanks Jon.

I pulled ntb-next and ran my test suite on it. Looks good.

Logan

On 31/08/17 11:53 AM, Jon Mason wrote:
> On Wed, Aug 30, 2017 at 01:18:28PM -0600, Logan Gunthorpe wrote:
>> Hey Jon,
>>
>> Any update on this? The merge window is likely very soon and it would be
>> good to know where we stand. As far as I know I've addressed all the
>> feedback I've been given. Let me know if there's anything I can do to
>> further this process.
> 
> My apologies for the delay.  I've pulled the series into my ntb-next
> branch.
> 
> When you get a chance, please pulldown and verify that I didn't miss
> anything (and a smoke test that it works as desired would be nice
> too).
> 
> Thanks,
> Jon
> 
>>
>> Thanks,
>>
>> Logan
>>
>> On 22/08/17 10:59 AM, Logan Gunthorpe wrote:
>>> Hi,
>>>
>>> Just wanted to give this a poke as I haven't received any feedback in a
>>> couple weeks on v4. What are people's thoughts on this? Is it suitable
>>> to make it into the next merge window?
>>>
>>> Thanks,
>>>
>>> Logan
>>>
>>>
>>> On 03/08/17 12:19 PM, Logan Gunthorpe wrote:
>>>> Changes since v3:
>>>>
>>>> - Rebased onto the Jon's ntb branch that contains one of the patches
>>>>     that was in v3
>>>> - Various spelling and commit log mistakes noticed by Bjorn
>>>> - Renamed switchtec_ntb to ntb_hw_switchtec per Dave's suggestion
>>>> - Fixed a number of code nits pointed out by Jon
>>>>
>>>> -- 
>>>>
>>>> Changes since v2:
>>>>
>>>> - Reordered the ntb_test link patch per Allen
>>>> - Removed an extra call to switchtec_ntb_init_mw
>>>> - Fixed a typo in the switchtec.txt documentation.
>>>>
>>>> -- 
>>>>
>>>> Changes since v1:
>>>>
>>>> - Rebased onto latest ntb-next branch (with v4.13-rc1)
>>>> - Reworked ntb_mw_count() function so that it can be called all the
>>>>     time (per discussion with Allen)
>>>> - Various spelling and formatting cleanups from Bjorn
>>>> - Added request_module() call such that the NTB module is automatically
>>>>     loaded when appropriate hardware exists.
>>>>
>>>> -- 
>>>>
>>>> Changes since the rfc:
>>>>
>>>> - Rebased on ntb-next
>>>> - Switched ntb_part_op to use sleep instead of delay
>>>> - Dropped a number of useless dbg __func__ prints
>>>> - Went back to the dynamic instead of the static class
>>>> - Swapped the notifier block for a simple callback
>>>> - Modified the new ntb api so that a couple functions with pidx
>>>>     now must be called after link up. Per our discussion on the list.
>>>>
>>>> -- 
>>>>
>>>> This patchset implements Non-Transparent Bridge (NTB) support for the
>>>> Microsemi Switchtec series of switches. We're looking for some
>>>> review from the community at this point but hope to get it upstreamed
>>>> for v4.14.
>>>>
>>>> Switchtec NTB support is configured over the same function and bar
>>>> as the management endpoint. Thus, the new driver hooks into the
>>>> management driver which we had merged in v4.12. We use the class
>>>> interface API to register an NTB device for every switchtec device
>>>> which supports NTB (not all do).
>>>>
>>>> The Switchtec hardware supports doorbells, memory windows and messages.
>>>> Seeing there is no native scratchpad support, 128 spads are emulated
>>>> through the use of a pre-setup memory window. The switch has 64
>>>> doorbells which are shared between the two partitions and a
>>>> configurable set of memory windows. While the hardware supports more
>>>> than 2 partitions, this driver only supports the first two seeing
>>>> the current NTB API only supports two hosts.
>>>>
>>>> The driver has been tested with ntb_netdev and fully passes the
>>>> ntb_test script.
>>>>
>>>> This patchset is based off of ntb-next and can be found in this
>>>> git repo:
>>>>
>>>> https://github.com/sbates130272/linux-p2pmem.git switchtec_ntb_v4
>>>>
>>>> Logan Gunthorpe (15):
>>>>     NTB: switchtec: Move structure definitions into a common header
>>>>     NTB: switchtec: Export class symbol for use in upper layer driver
>>>>     NTB: switchtec: Add NTB hardware register definitions
>>>>     NTB: switchtec: Add link event notifier callback
>>>>     NTB: Ensure ntb_mw_get_align() is only called when the link is up
>>>>     NTB: Add check and comment for link up to mw_count() and
>>>>       mw_get_align()
>>>>     NTB: switchtec_ntb: Introduce initial NTB driver
>>>>     NTB: switchtec_ntb: Initialize hardware for memory windows
>>>>     NTB: switchtec_ntb: Initialize hardware for doorbells and messages
>>>>     NTB: switchtec_ntb: Add skeleton NTB driver
>>>>     NTB: switchtec_ntb: Add link management
>>>>     NTB: switchtec_ntb: Implement doorbell registers
>>>>     NTB: switchtec_ntb: Implement scratchpad registers
>>>>     NTB: switchtec_ntb: Add memory window support
>>>>     NTB: switchtec_ntb: Update switchtec documentation with notes for NTB
>>>>
>>>>    Documentation/switchtec.txt            |   12 +
>>>>    MAINTAINERS                            |    2 +
>>>>    drivers/ntb/hw/Kconfig                 |    1 +
>>>>    drivers/ntb/hw/Makefile                |    1 +
>>>>    drivers/ntb/hw/mscc/Kconfig            |    9 +
>>>>    drivers/ntb/hw/mscc/Makefile           |    1 +
>>>>    drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 1216
>>>> ++++++++++++++++++++++++++++++++
>>>>    drivers/ntb/ntb_transport.c            |   20 +-
>>>>    drivers/ntb/test/ntb_perf.c            |   18 +-
>>>>    drivers/ntb/test/ntb_tool.c            |    6 +-
>>>>    drivers/pci/switch/switchtec.c         |  316 ++-------
>>>>    include/linux/ntb.h                    |   11 +-
>>>>    include/linux/switchtec.h              |  373 ++++++++++
>>>>    13 files changed, 1703 insertions(+), 283 deletions(-)
>>>>    create mode 100644 drivers/ntb/hw/mscc/Kconfig
>>>>    create mode 100644 drivers/ntb/hw/mscc/Makefile
>>>>    create mode 100644 drivers/ntb/hw/mscc/ntb_hw_switchtec.c
>>>>    create mode 100644 include/linux/switchtec.h
>>>>
>>>> -- 
>>>> 2.11.0
>>>>
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups "linux-ntb" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-ntb+unsubscribe@googlegroups.com.
>> To post to this group, send email to linux-ntb@googlegroups.com.
>> To view this discussion on the web visit https://groups.google.com/d/msgid/linux-ntb/50ba7618-b5c3-1779-ad79-0f32254ebbaf%40deltatee.com.
>> For more options, visit https://groups.google.com/d/optout.