Re: [PATCH] Bugfix RTS line config in RS485 mode is overwritten in pl011_set_mctrl() function.

[Jochen Mades <jochen@mades.net>]

Hi Lukas, Lino,

please let me know when I could test again with an "official" linux kernel, instead of using my local patch.

Bests
Jochen

> On 02/01/2022 19:28 Lukas Wunner <lukas@wunner.de> wrote:
> 
>  
> On Sun, Jan 02, 2022 at 04:06:53PM +0100, Lino Sanfilippo wrote:
> > On 02.01.22 at 11:07, Lukas Wunner wrote:
> > > On Fri, Dec 31, 2021 at 05:15:14PM +0000, jmades wrote:
> > > > --- a/drivers/tty/serial/amba-pl011.c
> > > > +++ b/drivers/tty/serial/amba-pl011.c
> > > > @@ -1646,8 +1646,12 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
> > > >  	    container_of(port, struct uart_amba_port, port);
> > > >  	unsigned int cr;
> > > >
> > > > -	if (port->rs485.flags & SER_RS485_ENABLED)
> > > > -		mctrl &= ~TIOCM_RTS;
> > > > +	if (port->rs485.flags & SER_RS485_ENABLED) {
> > > > +		if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
> > > > +			mctrl &= ~TIOCM_RTS;
> > > > +		else
> > > > +			mctrl |= TIOCM_RTS;
> > > > +	}
> > > >
> > > >  	cr = pl011_read(uap, REG_CR);
> > 
> > Does this logic really have to be implemented in the driver?
> 
> No, it doesn't have to be and indeed I'm working towards consolidating
> it in the serial core with this collection of patches:
> 
> https://git.kernel.org/gregkh/tty/c/d3b3404df318
> https://lore.kernel.org/all/f49f945375f5ccb979893c49f1129f51651ac738.1641129062.git.lukas@wunner.de
> https://lore.kernel.org/all/e22089ab49e6e78822c50c8c4db46bf3ee885623.1641129328.git.lukas@wunner.de
> https://lore.kernel.org/all/bceeaba030b028ed810272d55d5fc6f3656ddddb.1641129752.git.lukas@wunner.de
> https://github.com/l1k/linux/commit/532ef2ad757f
> 
> The last of these removes the rs485 logic from pl011_set_mctrl().
> I'll post it once the others (and Jochen Mades' patch) have landed.
> 
> Even though the logic is eventually removed from pl011_set_mctrl(),
> Jochen's patch makes sense as a backportable fix for v5.15.
> 
> 
> > It looks as if the serial core already takes RS485 into account before
> > calling set_mctrls(). At least I get the impression when looking
> > at uart_tiocmset() and uart_port_dtr_rts(). Also other drivers like imx
> > simply seem to ignore RTS in case of RS485.
> 
> The logic in uart_port_dtr_rts() is broken.  That's fixed by d3b3404df318,
> which is queued up in tty-next for v5.17.
> 
> The pl011 driver papered over it with its own rs485-specific logic in
> pl011_set_mctrl().  But as Jochen Mades correctly pointed out, that
> only worked correctly if RTS is driven high on idle.
> 
> 
> The logic in uart_tiocmset() is correct, but not sufficient because
> uart_throttle(), uart_unthrottle and uart_set_termios() need to become
> rs485-aware as well.  That's also addressed by the above-linked
> GitHub commit.
> 
> Thanks,
> 
> Lukas