From: Helen Koike <koike@igalia.com>
To: Marek Szyprowski <m.szyprowski@samsung.com>,
Alexander Potapenko <glider@google.com>,
Robin Murphy <robin.murphy@arm.com>,
Christoph Hellwig <hch@infradead.org>,
Leon Romanovsky <leonro@nvidia.com>,
mhklinux@outlook.com
Cc: anthony.l.nguyen@intel.com, przemyslaw.kitszel@intel.com,
andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com,
Aleksandr Nogikh <nogikh@google.com>,
kernel-dev@igalia.com
Subject: Re: KMSAN: uninit-value in eth_type_trans
Date: Fri, 20 Mar 2026 14:30:45 -0300 [thread overview]
Message-ID: <270a0c7b-a917-4c1a-9b21-e8dcec4dc260@igalia.com> (raw)
In-Reply-To: <0d5f2179-b89b-42b6-805d-6a50d2268eca@samsung.com>
Hi all,
On 10/13/25 4:31 AM, Marek Szyprowski wrote:
> On 08.10.2025 10:43, Alexander Potapenko wrote:
>> On Tue, Oct 7, 2025 at 8:51 AM Alexander Potapenko <glider@google.com> wrote:
>>> Folks, as far as I understand, dma_direct_sync_single_for_cpu() and
>>> dma_direct_sync_single_for_device() are the places where we send data
>>> to or from the device.
>>> Should we add KMSAN annotations to those functions to catch infoleaks
>>> and mark data from devices as initialized?
>> Something along the lines of:
>>
>> ======================================
>> diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
>> index 0d37da3d95b65..7f59de19c1c87 100644
>> --- a/kernel/dma/swiotlb.c
>> +++ b/kernel/dma/swiotlb.c
>> @@ -42,6 +42,7 @@
>> #include <linux/string.h>
>> #include <linux/swiotlb.h>
>> #include <linux/types.h>
>> +#include <linux/kmsan-checks.h>
>> #ifdef CONFIG_DMA_RESTRICTED_POOL
>> #include <linux/of.h>
>> #include <linux/of_fdt.h>
>> @@ -903,10 +904,13 @@ static void swiotlb_bounce(struct device *dev,
>> phys_addr_t tlb_addr, size_t size
>>
>> local_irq_save(flags);
>> page = pfn_to_page(pfn);
>> - if (dir == DMA_TO_DEVICE)
>> + if (dir == DMA_TO_DEVICE) {
>> + kmsan_check_highmem_page(page, offset, sz);
>> memcpy_from_page(vaddr, page, offset, sz);
>> - else
>> + } else {
>> + kmsan_unpoison_memory(vaddr, sz);
>> memcpy_to_page(page, offset, vaddr, sz);
>> + }
>> local_irq_restore(flags);
>>
>> size -= sz;
>> @@ -915,8 +919,10 @@ static void swiotlb_bounce(struct device *dev,
>> phys_addr_t tlb_addr, size_t size
>> offset = 0;
>> }
>> } else if (dir == DMA_TO_DEVICE) {
>> + kmsan_check_memory(phys_to_virt(orig_addr), size);
>> memcpy(vaddr, phys_to_virt(orig_addr), size);
>> } else {
>> + kmsan_unpoison_memory(vaddr, size);
>> memcpy(phys_to_virt(orig_addr), vaddr, size);
>> }
>> }
>> ======================================
>>
>> should be conceptually right, but according to the comment in
>> swiotlb_tbl_map_single()
>> (https://protect2.fireeye.com/v1/url?k=837a6d67-dce15478-837be628-000babdfecba-aa25926458f9fd30&q=1&e=a3963b1b-328b-4f69-8ca5-ffd6fc777dd7&u=https%3A%2F%2Felixir.bootlin.com%2Flinux%2Fv6.17.1%2Fsource%2Fkernel%2Fdma%2Fswiotlb.c%23L1431),
>> that function is deliberately copying the buffer to the device, even
>> when it is uninitialized - and KMSAN actually started reporting that
>> when I applied the above patch.
>>
>> How should we handle this case?
>> Not adding the kmsan_check_memory() calls will solve the problem, but
>> there might be real infoleaks that we won't detect.
>> We could unpoison the buffer before passing it to
>> swiotlb_tbl_map_single() to ignore just the first infoleak on the
>> buffer.
>> Alternatively, we could require callers to always initialize the
>> buffer passed to swiotlb_tbl_map_single().
>
> Well, I didn't consider swiotlb a special case so far. I did a simple
> test with my PoC patch mentioned earlier in this thread with
> 'swiotlb=force' kernel parameter and I didn't observe any kmsan issues,
> but I admin that this wasn't exhaustive test.
>
> Best regards
I just hit this issue and found this thread. So I'm sharing below my
report in case it is useful (if not, please just ignore):
I'm easily reproducing it when trying to reproduce another unrelated
issue[1] by syzbot on qemu[2] with torvalds/master branch, commit
0e4f8f1a3d08 .
[1] https://syzkaller.appspot.com/bug?extid=ba80855313e6fa65717a
[2]
https://github.com/google/syzkaller/blob/master/docs/reproducing_crashes.md#using-a-c-reproducer
To momentarily fix it (and allow me o reach my syzbot issue), I just did
the following:
@@ -916,6 +917,12 @@ static void swiotlb_bounce(struct device *dev,
phys_addr_t tlb_addr, size_t size
memcpy(vaddr, phys_to_virt(orig_addr), size);
} else {
memcpy(phys_to_virt(orig_addr), vaddr, size);
+ kmsan_unpoison_memory(phys_to_virt(orig_addr), size);
}
}
Which, from the discussions here is obviously not the right solution.
In case it helps, see below what I'm executing:
(copy and pasted from my scripts)
* Config:
https://syzkaller.appspot.com/text?tag=KernelConfig&x=963de479f54c6dbb
* Disk image:
https://storage.googleapis.com/syzbot-assets/bef78207d3f7/disk-2d1373e4.raw.xz
$ gcc \
repro.c \
-lpthread \
-static \
-o repro
Running make olddefconfig …
$ make O=/$BUILD_DIR CC=clang LD=ld.lld olddefconfig
Building kernel …
$ make O=$BUILD_DIR CC=clang LD=ld.lld -j$NPROC
Starting QEMU with disk image …
SSH port: 35053
$ qemu-system-x86_64 \
-m 8G \
-smp 2,sockets=2,cores=1 \
-drive file=disk.raw,format=raw \
-net nic,model=e1000 \
-net user,host=10.0.2.10,hostfwd=tcp::10022-:22 \
-kernel $BUILD_DIR/arch/x86/boot/bzImage \
-append 'root=/dev/sda1 console=ttyS0 panic_on_warn=1
earlyprintk=serial net.ifnames=0 vsyscall=native numa=fake=2' \
-enable-kvm \
-nographic \
-snapshot \
-machine pc-q35-7.1 \
-cpu host
$ scp \
-P 10022 \
repro \
root@127.0.0.1:/root/
$ ssh -p 10022 root@127.0.0.1 'chmod +x ./repro && ./repro'
Regards,
Helen
next prev parent reply other threads:[~2026-03-20 17:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-25 22:36 Aleksandr Nogikh
2025-10-07 6:51 ` Alexander Potapenko
2025-10-08 8:43 ` Alexander Potapenko
2025-10-13 7:31 ` Marek Szyprowski
2026-03-20 17:30 ` Helen Koike [this message]
2025-10-08 8:53 ` Marek Szyprowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=270a0c7b-a917-4c1a-9b21-e8dcec4dc260@igalia.com \
--to=koike@igalia.com \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=glider@google.com \
--cc=hch@infradead.org \
--cc=kernel-dev@igalia.com \
--cc=kuba@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mhklinux@outlook.com \
--cc=netdev@vger.kernel.org \
--cc=nogikh@google.com \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=robin.murphy@arm.com \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®