From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758689AbcK3TOQ (ORCPT ); Wed, 30 Nov 2016 14:14:16 -0500 Received: from mail-wm0-f67.google.com ([74.125.82.67]:33499 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753815AbcK3TOO (ORCPT ); Wed, 30 Nov 2016 14:14:14 -0500 From: Jernej =?utf-8?B?xaBrcmFiZWM=?= To: Icenowy Zheng Cc: linux-sunxi , linux-kernel , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, wens@csie.org, maxime.ripard@free-electrons.com Subject: Re: [linux-sunxi] Re: [RFC PATCH] ARM: dts: sun8i: add simplefb node for H3 Date: Wed, 30 Nov 2016 20:14:11 +0100 Message-ID: <2717236.xBNAaGdqdc@jernej-laptop> User-Agent: KMail/5.3.3 (Linux/4.8.10-1-ARCH; KDE/5.28.0; x86_64; ; ) In-Reply-To: <20161130220324.3Kg4VPEw@smtp1m.mail.yandex.net> References: <20161130220324.3Kg4VPEw@smtp1m.mail.yandex.net> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by mail.home.local id uAUJHWeQ026427 Dne četrtek, 01. december 2016 ob 03:03:14 CET je Icenowy Zheng napisal(a): > 2016年12月1日 02:49于 Jernej Skrabec 写道： > > > Hi Jean-François, > > > > Dne sreda, 30. november 2016 10.35.08 UTC+1 je oseba Jean-François Moine napisala: > >> On Tue, 29 Nov 2016 22:59:32 +0100 > >> > >> Maxime Ripard wrote: > >> > > > I'm still not sure which pipeline should I use. > >> > > > > >> > > > And, it seems that HDMI Slow Clock is not needed? > >> > > > > >> > > > (seems that it's only for EDID, but simplefb won't use EDID) > >> > > > >> > > So, I don't see how this may work. > >> > > How can the u-boot know the resolutions of the HDMI display device? > >> > > > >> > > In other words: I have a new H3 board with the last u-boot and > >> > > kernel. > >> > > I plug my (rather old or brand new) HDMI display device. > >> > > After powering on the system, I hope to get something on the screen. > >> > > How? > >> > > >> > If it works like the driver for the first display engine in U-Boot, it > >> > will use the preferred mode reported by the EDID, and will fallback to > >> > 1024x768 if it cannot access it. > >> > >> Icenowy wrote: "simplefb won't use EDID" > >> > >> Then, if it is like in the kernel, the 1024x768 mode is VGA. It does > >> not work with HDMI (different timings). > > > > U-Boot driver now accept any timings recommended by EDID. So far it > > was tested with at least following resolutions: > > - 1920x1080 @ 60 Hz > > - 1280x1024 @ 60 Hz > > - 1280x800 @ 60 Hz (slight clock difference) > > - 800x480 (not sure about frame rate) > > - 3840x2160 @ 30 Hz (4K) > > I tested on 1024x600 (If my memory is right, it's @ 60Hz) > > > and nobody complained so far. I'm pretty sure 1024x768 would work. > > > >> > Maybe it would be worth exchanging on the EDID code that has been done > >> > for the u-boot driver too, so that it can be fixed in your driver. > >> > >> The u-boot got my code, and, up to now, I could not fix the random or > >> permanent failures of EDID reading in some boards. > > > > I only have one OPi2, but as I said, EDID always worked for me. The only > > code left from you is for DE2. HDMI stuff is basically copied from Rockhip > > driver (including EDID reading), TCON code is now reverted to the same as > > it is in sunxi_display.c. I think it is worth to take a look at EDID code > > and compare it. > > So is the TCON of DE 2.0 identical to the original TCON? > > If so, we should reuse sun4i-tcon ... > Well, TCON is splitted in two parts (two base addresses), one for HDMI and one for TV. However, register offsets are same as before, so I guess driver reusage make sense. I think that there are few additional registers, but they can be ignored for simplefb. > > > > > >> -- > >> Ken ar c'hentañ | ** Breizh ha Linux atav! ** > >> Jef | http://moinejf.free.fr/ > > > > Best regards, > > Jernej Škrabec > > > > -- > > You received this message because you are subscribed to the Google Groups > > "linux-sunxi" group. To unsubscribe from this group and stop receiving > > emails from it, send an email to > > linux-sunxi+unsubscribe@googlegroups.com. For more options, visit > > https://groups.google.com/d/optout. Best regards, Jernej Škrabec