mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Xiubo Li <xiubli@redhat.com>
To: "Luís Henriques" <lhenriques@suse.de>
Cc: Jeff Layton <jlayton@kernel.org>,
	Ilya Dryomov <idryomov@gmail.com>,
	ceph-devel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH] ceph: add support for encrypted snapshot names
Date: Mon, 28 Feb 2022 08:42:05 +0800	[thread overview]
Message-ID: <277bf08e-2547-f29a-ec91-86647ab455d4@redhat.com> (raw)
In-Reply-To: <871qzpu12m.fsf@brahms.olymp>


On 2/26/22 10:58 PM, Luís Henriques wrote:
> Xiubo Li <xiubli@redhat.com> writes:
>
>> On 2/25/22 5:48 PM, Luís Henriques wrote:
>>> Xiubo Li <xiubli@redhat.com> writes:
>>>
>>>> On 2/24/22 7:21 PM, Luís Henriques wrote:
>>>>> Since filenames in encrypted directories are already encrypted and shown
>>>>> as a base64-encoded string when the directory is locked, snapshot names
>>>>> should show a similar behaviour.
>>>>>
>>>>> Signed-off-by: Luís Henriques <lhenriques@suse.de>
>>>>> ---
>>>>>     fs/ceph/dir.c   | 15 +++++++++++++++
>>>>>     fs/ceph/inode.c | 10 +++++++++-
>>>>>     2 files changed, 24 insertions(+), 1 deletion(-)
>>>>>
>>>>> Support on the MDS for names that'll be > MAX_NAME when base64 encoded is
>>>>> still TBD.  I thought it would be something easy to do, but snapshots
>>>>> don't seem to make use of the CDir/CDentry (which is where alternate_name
>>>>> is stored on the MDS).  I'm still looking into this, but I may need some
>>>>> help there :-(
>>>>>
>>>>> Cheers,
>>>>> --
>>>>> Luís
>>>>>
>>>>> diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
>>>>> index a449f4a07c07..20ae600ee7cd 100644
>>>>> --- a/fs/ceph/dir.c
>>>>> +++ b/fs/ceph/dir.c
>>>>> @@ -1065,6 +1065,13 @@ static int ceph_mkdir(struct user_namespace *mnt_userns, struct inode *dir,
>>>>>     		op = CEPH_MDS_OP_MKSNAP;
>>>>>     		dout("mksnap dir %p snap '%pd' dn %p\n", dir,
>>>>>     		     dentry, dentry);
>>>>> +		/* XXX missing support for alternate_name in snapshots */
>>>>> +		if (IS_ENCRYPTED(dir) && (dentry->d_name.len >= 189)) {
>>>>> +			dout("encrypted snapshot name too long: %pd len: %d\n",
>>>>> +			     dentry, dentry->d_name.len);
>>>>> +			err = -ENAMETOOLONG;
>>>>> +			goto out;
>>>>> +		}
>>>>>     	} else if (ceph_snap(dir) == CEPH_NOSNAP) {
>>>>>     		dout("mkdir dir %p dn %p mode 0%ho\n", dir, dentry, mode);
>>>>>     		op = CEPH_MDS_OP_MKDIR;
>>>>> @@ -1109,6 +1116,14 @@ static int ceph_mkdir(struct user_namespace *mnt_userns, struct inode *dir,
>>>>>     	    !req->r_reply_info.head->is_target &&
>>>>>     	    !req->r_reply_info.head->is_dentry)
>>>>>     		err = ceph_handle_notrace_create(dir, dentry);
>>>>> +
>>>>> +	/*
>>>>> +	 * If we have created a snapshot we need to clear the cache, otherwise
>>>>> +	 * snapshot will show encrypted filenames in readdir.
>>>>> +	 */
>>>> Do you mean dencrypted filenames ?
>>> What I see without this d_drop() is that, if I run an 'ls' in a snapshot
>>> directory immediately after creating it, the filenames in that snapshot
>>> will be encrypted.  Maybe there's a bug somewhere else and this d_drop()
>>> isn't the right fix...?
>> BTW, how did you reproduce this ?
>>
>> The snapshot name hasn't encrypted yet ? Did you add one patch to do this ?
> I don't think I understand what you're referring to.  I haven't looked
> into you patch (probably won't be able to do in before Wednesday) but if
> you remove the d_drop() in ceph_mkdir() in this patch, here's what I use
> to reproduce the issue:
>
> 	# mkdir mydir
> 	# fscrypt encrypt mydir
> 	# cd mydir
> 	# create a few files
> 	# mkdir .snap/snapshot-01
> 	# ls -l .snap/snapshot-01

This is my test by using the branch 'wip-fscrypt' branch:

[root@lxbceph1 kcephfs]# cd mydir/
[root@lxbceph1 mydir]# mkdir a b cd
[root@lxbceph1 mydir]# ls
a  b  c
[root@lxbceph1 mydir]# ls .snap
[root@lxbceph1 mydir]# mkdir .snap/mydir_snap1
[root@lxbceph1 mydir]# ls .snap/mydir_snap1
a  b  c
[root@lxbceph1 mydir]# ls .snap/
mydir_snap1
[root@lxbceph1 mydir]# touch file1 file2 file3
[root@lxbceph1 mydir]# mkdir .snap/mydir_snap2
[root@lxbceph1 mydir]# ls .snap/mydir_snap2
a  b  c  file1  file2  file3
[root@lxbceph1 mydir]# ls .snap/
mydir_snap1  mydir_snap2
[root@lxbceph1 mydir]# ls
a  b  c  file1  file2  file3

[root@lxbceph1 mydir]# cd ..
[root@lxbceph1 kcephfs]# fscrypt lock mydir/
"mydir/" is now locked.
[root@lxbceph1 kcephfs]# cd mydir/
[root@lxbceph1 mydir]# ls
5D7Q8T0rdSRiJZnvbpCWRFQnLb3BxO4-zyVHsFCH98o 
LWbsdS2rvuCALUXE0TrTqbuElw4zU6cZHg62-LY5GMA 
u2nEDclQZAdtetYqQ7aCWNFwu8-1FDH9vI6pM4o6ZN8
-fKqUSM9DGlT1KNE-pkygEXAdjwf9fTDROA_6ZkDEio 
m42jW1zJs75o2dx0bEHNmEWx9GmYXxHveSmBFagwPOw 
ZLYwBnb7WT78Saz5RFEOdrKn3OLb6AfHk-IElAmEVps

[root@lxbceph1 mydir]# ls .snap/
mydir_snap1  mydir_snap2

[root@lxbceph1 mydir]# ls .snap/mydir_snap1
LWbsdS2rvuCALUXE0TrTqbuElw4zU6cZHg62-LY5GMA 
m42jW1zJs75o2dx0bEHNmEWx9GmYXxHveSmBFagwPOw 
ZLYwBnb7WT78Saz5RFEOdrKn3OLb6AfHk-IElAmEVps
[root@lxbceph1 mydir]# ls .snap/mydir_snap2
5D7Q8T0rdSRiJZnvbpCWRFQnLb3BxO4-zyVHsFCH98o 
LWbsdS2rvuCALUXE0TrTqbuElw4zU6cZHg62-LY5GMA 
u2nEDclQZAdtetYqQ7aCWNFwu8-1FDH9vI6pM4o6ZN8
-fKqUSM9DGlT1KNE-pkygEXAdjwf9fTDROA_6ZkDEio 
m42jW1zJs75o2dx0bEHNmEWx9GmYXxHveSmBFagwPOw 
ZLYwBnb7WT78Saz5RFEOdrKn3OLb6AfHk-IElAmEVps

[root@lxbceph1 mydir]# cd ..
[root@lxbceph1 kcephfs]# fscrypt unlock mydir/
Enter custom passphrase for protector "l":
"mydir/" is now unlocked and ready for use.
[root@lxbceph1 kcephfs]# cd mydir/
[root@lxbceph1 mydir]# ls
a  b  c  file1  file2  file3
[root@lxbceph1 mydir]# ls .snap/mydir_snap1
a  b  c
[root@lxbceph1 mydir]# ls .snap/mydir_snap2
a  b  c  file1  file2  file3
[root@lxbceph1 mydir]#


We can see that only the "mydir_snap1" and "mydir_snap2" snapshot names 
are not encrypted when the 'mydir' is locked, my patch above is fixing 
this issue. All the others work as expected.


>
> And this would show the contents 'snapshot-01' but with the filenames
> encrypted, even with 'mydir' isn't locked.
>
> With this d_drop(), this behaviour will go away, i.e. you'll see the
> correct (unencrypted) filenames.

The tests above without this changes in your patch.


> Also, after locking 'mydir' (fscrypt lock mydir), an 'ls' in the snapshot
> directory ('ls mydir/.snap') will show the _encrypted_ snapshot names and
> an 'ls' in the snapshot itself ('ls mydir/.snap/<ENCRYPTED NAME>') will
> show the encrypted filenames as in an 'ls mydir'.

Not sure whether I missed something here, so strange I couldn't 
reproduce it.

BTW, which branch were you using to test this ?

I will post my patch to fix the issue I mentioned.

- Xiubo

> Cheers,


  reply	other threads:[~2022-02-28  0:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-24 11:21 Luís Henriques
2022-02-25  5:36 ` Xiubo Li
2022-02-25  9:45   ` Luís Henriques
2022-02-25  6:55 ` Xiubo Li
2022-02-25  9:48   ` Luís Henriques
2022-02-25 10:42     ` Xiubo Li
2022-02-25 13:27       ` Luís Henriques
2022-02-26  6:52     ` Xiubo Li
2022-02-26 14:58       ` Luís Henriques
2022-02-28  0:42         ` Xiubo Li [this message]
2022-02-25 20:57 ` Jeff Layton
2022-02-26 15:06   ` Luís Henriques

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=277bf08e-2547-f29a-ec91-86647ab455d4@redhat.com \
    --to=xiubli@redhat.com \
    --cc=ceph-devel@vger.kernel.org \
    --cc=idryomov@gmail.com \
    --cc=jlayton@kernel.org \
    --cc=lhenriques@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®