Re: [PATCH V3 2/2] arm64: dts: qcom: sc7280: Add reset entries for SDCC controllers

["Sajida Bhanu (Temp)" <quic_c_sbhanu@quicinc.com>]

Hi,

Thanks for the review.

Please find the inline comments.

Thanks,
Sajida

On 4/2/2022 3:39 AM, Stephen Boyd wrote:
> Quoting Shaik Sajida Bhanu (2022-03-17 08:49:25)
>> Add gcc hardware reset entries for eMMC and SD card.
>>
>> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index c07765d..cd50ea3 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -881,6 +881,10 @@
>>                          mmc-hs400-1_8v;
>>                          mmc-hs400-enhanced-strobe;
>>
>> +                       /* gcc hardware reset entry for eMMC */
> Please don't add this worthless comment.
>
>> +                       resets = <&gcc GCC_SDCC1_BCR>;
>> +                       reset-names = "core_reset";
> A "_reset" postfix is redundant. In fact, reset-names shouldn't even be
> required.
Ok
>> +
>>                          sdhc1_opp_table: opp-table {
>>                                  compatible = "operating-points-v2";
>>
>> @@ -2686,6 +2690,10 @@
>>
>>                          qcom,dll-config = <0x0007642c>;
>>
>> +                       /* gcc hardware reset entry for SD card */
> Please don't add this worthless comment.
Sure will remove the comment.
>> +                       resets = <&gcc GCC_SDCC2_BCR>;
>> +                       reset-names = "core_reset";
>> +
>>                          sdhc2_opp_table: opp-table {
>>                                  compatible = "operating-points-v2";
>>