From: Pavel Fedin <p.fedin@samsung.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>
Subject: [PATCH v6 4/4] ARM: dts: Add Ethernet chip to SMDK5410
Date: Thu, 05 Nov 2015 15:03:03 +0300 [thread overview]
Message-ID: <27f540c1990df410bc20dcac7a35bede19fdb45b.1446724046.git.p.fedin@samsung.com> (raw)
In-Reply-To: <cover.1446724046.git.p.fedin@samsung.com>
In-Reply-To: <cover.1446724046.git.p.fedin@samsung.com>
The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO
initialization is required.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
---
arch/arm/boot/dts/exynos5410-smdk5410.dts | 41 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5410.dtsi | 6 +++++
2 files changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index cebeaab..373abf7 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos5410.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Samsung SMDK5410 board based on EXYNOS5410";
compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
@@ -61,6 +62,46 @@
disable-wp;
};
+&pinctrl_0 {
+ srom_ctl: srom-ctl {
+ samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+ "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-drv = <0>;
+ };
+
+ srom_ebi: srom-ebi {
+ samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+ "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+ "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+ "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+ "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+ "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sromc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+ ethernet@3 {
+ compatible = "smsc,lan9115";
+ reg = <3 0 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpx0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ smsc,force-internal-phy;
+
+ samsung,srom-page-mode = <1>;
+ samsung,srom-timing = <9 12 1 9 1 1>;
+ };
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index e2b58f8..9cfb814 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -104,6 +104,12 @@
sromc: sromc@12250000 {
compatible = "samsung,exynos-srom";
reg = <0x12250000 0x14>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000 0x20000
+ 1 0 0x05000000 0x20000
+ 2 0 0x06000000 0x20000
+ 3 0 0x07000000 0x20000>;
};
pmu_system_controller: system-controller@10040000 {
--
2.4.4
next prev parent reply other threads:[~2015-11-05 12:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-05 12:02 [PATCH v6 0/4] Exynos SROMc configuration and Ethernet support for SMDK5410 Pavel Fedin
2015-11-05 12:03 ` [PATCH v6 1/4] Documentation: dt-bindings: Describe SROMc configuration Pavel Fedin
2015-11-06 0:03 ` Krzysztof Kozlowski
2015-11-06 8:14 ` Pavel Fedin
2015-11-06 8:18 ` Krzysztof Kozlowski
2015-11-05 12:03 ` [PATCH v6 2/4] ARM: dts: Add SROMc to Exynos 5410 Pavel Fedin
2015-11-06 0:03 ` Krzysztof Kozlowski
2015-11-05 12:03 ` [PATCH v6 3/4] drivers: exynos-srom: Add support for bank configuration Pavel Fedin
2015-11-06 0:11 ` Krzysztof Kozlowski
2015-11-05 12:03 ` Pavel Fedin [this message]
2015-11-06 0:12 ` [PATCH v6 4/4] ARM: dts: Add Ethernet chip to SMDK5410 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=27f540c1990df410bc20dcac7a35bede19fdb45b.1446724046.git.p.fedin@samsung.com \
--to=p.fedin@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®