mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Herve Codina <herve.codina@bootlin.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Qiang Zhao <qiang.zhao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
	Mark Brown <broonie@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v2 11/36] soc: fsl: cpm1: tsa: Introduce tsa_setup() and its CPM1 compatible version
Date: Fri, 23 Aug 2024 10:06:49 +0200	[thread overview]
Message-ID: <280789e0-a018-432f-b208-e907add713ae@csgroup.eu> (raw)
In-Reply-To: <20240808071132.149251-12-herve.codina@bootlin.com>



Le 08/08/2024 à 09:11, Herve Codina a écrit :
> Current code handles the CPM1 version of TSA. Setting up TSA consists in
> handling SIMODE and SIGMR registers. These registers are CPM1 specific.
> 
> Setting up the QUICC Engine (QE) version of TSA is slightly different.
> 
> In order to prepare the support for QE version, clearly identify these
> registers as CPM1 compatible and isolate their handling in a CPM1
> specific function.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>

Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>


> ---
>   drivers/soc/fsl/qe/tsa.c | 93 +++++++++++++++++++++++-----------------
>   1 file changed, 54 insertions(+), 39 deletions(-)
> 
> diff --git a/drivers/soc/fsl/qe/tsa.c b/drivers/soc/fsl/qe/tsa.c
> index bf7354ebaca4..239b71187e07 100644
> --- a/drivers/soc/fsl/qe/tsa.c
> +++ b/drivers/soc/fsl/qe/tsa.c
> @@ -32,14 +32,14 @@
>   #define TSA_CPM1_SIRAM_ENTRY_CSEL_SMC2	FIELD_PREP_CONST(TSA_CPM1_SIRAM_ENTRY_CSEL_MASK, 0x6)
>   
>   /* SI mode register (32 bits) */
> -#define TSA_SIMODE	0x00
> -#define   TSA_SIMODE_SMC2			BIT(31)
> -#define   TSA_SIMODE_SMC1			BIT(15)
> -#define   TSA_SIMODE_TDMA_MASK			GENMASK(11, 0)
> -#define   TSA_SIMODE_TDMA(x)			FIELD_PREP(TSA_SIMODE_TDMA_MASK, x)
> -#define   TSA_SIMODE_TDMB_MASK			GENMASK(27, 16)
> -#define   TSA_SIMODE_TDMB(x)			FIELD_PREP(TSA_SIMODE_TDMB_MASK, x)
> -#define     TSA_SIMODE_TDM_MASK			GENMASK(11, 0)
> +#define TSA_CPM1_SIMODE		0x00
> +#define   TSA_CPM1_SIMODE_SMC2			BIT(31)
> +#define   TSA_CPM1_SIMODE_SMC1			BIT(15)
> +#define   TSA_CPM1_SIMODE_TDMA_MASK		GENMASK(11, 0)
> +#define   TSA_CPM1_SIMODE_TDMA(x)		FIELD_PREP(TSA_CPM1_SIMODE_TDMA_MASK, x)
> +#define   TSA_CPM1_SIMODE_TDMB_MASK		GENMASK(27, 16)
> +#define   TSA_CPM1_SIMODE_TDMB(x)		FIELD_PREP(TSA_CPM1_SIMODE_TDMB_MASK, x)
> +#define     TSA_CPM1_SIMODE_TDM_MASK		GENMASK(11, 0)
>   #define     TSA_SIMODE_TDM_SDM_MASK		GENMASK(11, 10)
>   #define       TSA_SIMODE_TDM_SDM_NORM		FIELD_PREP_CONST(TSA_SIMODE_TDM_SDM_MASK, 0x0)
>   #define       TSA_SIMODE_TDM_SDM_ECHO		FIELD_PREP_CONST(TSA_SIMODE_TDM_SDM_MASK, 0x1)
> @@ -49,22 +49,22 @@
>   #define     TSA_SIMODE_TDM_RFSD(x)		FIELD_PREP(TSA_SIMODE_TDM_RFSD_MASK, x)
>   #define     TSA_SIMODE_TDM_DSC			BIT(7)
>   #define     TSA_SIMODE_TDM_CRT			BIT(6)
> -#define     TSA_SIMODE_TDM_STZ			BIT(5)
> +#define     TSA_CPM1_SIMODE_TDM_STZ		BIT(5)
>   #define     TSA_SIMODE_TDM_CE			BIT(4)
>   #define     TSA_SIMODE_TDM_FE			BIT(3)
>   #define     TSA_SIMODE_TDM_GM			BIT(2)
>   #define     TSA_SIMODE_TDM_TFSD_MASK		GENMASK(1, 0)
>   #define     TSA_SIMODE_TDM_TFSD(x)		FIELD_PREP(TSA_SIMODE_TDM_TFSD_MASK, x)
>   
> -/* SI global mode register (8 bits) */
> -#define TSA_SIGMR	0x04
> -#define TSA_SIGMR_ENB			BIT(3)
> -#define TSA_SIGMR_ENA			BIT(2)
> -#define TSA_SIGMR_RDM_MASK		GENMASK(1, 0)
> -#define   TSA_SIGMR_RDM_STATIC_TDMA	FIELD_PREP_CONST(TSA_SIGMR_RDM_MASK, 0x0)
> -#define   TSA_SIGMR_RDM_DYN_TDMA	FIELD_PREP_CONST(TSA_SIGMR_RDM_MASK, 0x1)
> -#define   TSA_SIGMR_RDM_STATIC_TDMAB	FIELD_PREP_CONST(TSA_SIGMR_RDM_MASK, 0x2)
> -#define   TSA_SIGMR_RDM_DYN_TDMAB	FIELD_PREP_CONST(TSA_SIGMR_RDM_MASK, 0x3)
> +/* CPM SI global mode register (8 bits) */
> +#define TSA_CPM1_SIGMR	0x04
> +#define TSA_CPM1_SIGMR_ENB			BIT(3)
> +#define TSA_CPM1_SIGMR_ENA			BIT(2)
> +#define TSA_CPM1_SIGMR_RDM_MASK			GENMASK(1, 0)
> +#define   TSA_CPM1_SIGMR_RDM_STATIC_TDMA	FIELD_PREP_CONST(TSA_CPM1_SIGMR_RDM_MASK, 0x0)
> +#define   TSA_CPM1_SIGMR_RDM_DYN_TDMA		FIELD_PREP_CONST(TSA_CPM1_SIGMR_RDM_MASK, 0x1)
> +#define   TSA_CPM1_SIGMR_RDM_STATIC_TDMAB	FIELD_PREP_CONST(TSA_CPM1_SIGMR_RDM_MASK, 0x2)
> +#define   TSA_CPM1_SIGMR_RDM_DYN_TDMAB		FIELD_PREP_CONST(TSA_CPM1_SIGMR_RDM_MASK, 0x3)
>   
>   /* SI clock route register (32 bits) */
>   #define TSA_SICR	0x0C
> @@ -656,13 +656,45 @@ static void tsa_init_si_ram(struct tsa *tsa)
>   		tsa_write32(tsa->si_ram + i, TSA_CPM1_SIRAM_ENTRY_LAST);
>   }
>   
> +static int tsa_cpm1_setup(struct tsa *tsa)
> +{
> +	u32 val;
> +
> +	/* Set SIMODE */
> +	val = 0;
> +	if (tsa->tdm[0].is_enable)
> +		val |= TSA_CPM1_SIMODE_TDMA(tsa->tdm[0].simode_tdm);
> +	if (tsa->tdm[1].is_enable)
> +		val |= TSA_CPM1_SIMODE_TDMB(tsa->tdm[1].simode_tdm);
> +
> +	tsa_clrsetbits32(tsa->si_regs + TSA_CPM1_SIMODE,
> +			 TSA_CPM1_SIMODE_TDMA(TSA_CPM1_SIMODE_TDM_MASK) |
> +			 TSA_CPM1_SIMODE_TDMB(TSA_CPM1_SIMODE_TDM_MASK),
> +			 val);
> +
> +	/* Set SIGMR */
> +	val = (tsa->tdms == BIT(TSA_TDMA)) ?
> +		TSA_CPM1_SIGMR_RDM_STATIC_TDMA : TSA_CPM1_SIGMR_RDM_STATIC_TDMAB;
> +	if (tsa->tdms & BIT(TSA_TDMA))
> +		val |= TSA_CPM1_SIGMR_ENA;
> +	if (tsa->tdms & BIT(TSA_TDMB))
> +		val |= TSA_CPM1_SIGMR_ENB;
> +	tsa_write8(tsa->si_regs + TSA_CPM1_SIGMR, val);
> +
> +	return 0;
> +}
> +
> +static int tsa_setup(struct tsa *tsa)
> +{
> +	return tsa_cpm1_setup(tsa);
> +}
> +
>   static int tsa_probe(struct platform_device *pdev)
>   {
>   	struct device_node *np = pdev->dev.of_node;
>   	struct resource *res;
>   	struct tsa *tsa;
>   	unsigned int i;
> -	u32 val;
>   	int ret;
>   
>   	tsa = devm_kzalloc(&pdev->dev, sizeof(*tsa), GFP_KERNEL);
> @@ -696,26 +728,9 @@ static int tsa_probe(struct platform_device *pdev)
>   	if (ret)
>   		return ret;
>   
> -	/* Set SIMODE */
> -	val = 0;
> -	if (tsa->tdm[0].is_enable)
> -		val |= TSA_SIMODE_TDMA(tsa->tdm[0].simode_tdm);
> -	if (tsa->tdm[1].is_enable)
> -		val |= TSA_SIMODE_TDMB(tsa->tdm[1].simode_tdm);
> -
> -	tsa_clrsetbits32(tsa->si_regs + TSA_SIMODE,
> -			 TSA_SIMODE_TDMA(TSA_SIMODE_TDM_MASK) |
> -			 TSA_SIMODE_TDMB(TSA_SIMODE_TDM_MASK),
> -			 val);
> -
> -	/* Set SIGMR */
> -	val = (tsa->tdms == BIT(TSA_TDMA)) ?
> -		TSA_SIGMR_RDM_STATIC_TDMA : TSA_SIGMR_RDM_STATIC_TDMAB;
> -	if (tsa->tdms & BIT(TSA_TDMA))
> -		val |= TSA_SIGMR_ENA;
> -	if (tsa->tdms & BIT(TSA_TDMB))
> -		val |= TSA_SIGMR_ENB;
> -	tsa_write8(tsa->si_regs + TSA_SIGMR, val);
> +	ret = tsa_setup(tsa);
> +	if (ret)
> +		return ret;
>   
>   	platform_set_drvdata(pdev, tsa);
>   

  reply	other threads:[~2024-08-23  8:07 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-08  7:10 [PATCH v2 00/36] soc: fsl: Add support for QUICC Engine TSA and QMC Herve Codina
2024-08-08  7:10 ` [PATCH v2 01/36] soc: fsl: cpm1: qmc: Update TRNSYNC only in transparent mode Herve Codina
2024-08-23  8:03   ` Christophe Leroy
2024-08-08  7:10 ` [PATCH v2 02/36] soc: fsl: cpm1: qmc: Enable TRNSYNC only when needed Herve Codina
2024-08-23  8:03   ` Christophe Leroy
2024-08-08  7:10 ` [PATCH v2 03/36] soc: fsl: cpm1: tsa: Fix tsa_write8() Herve Codina
2024-08-23  8:04   ` Christophe Leroy
2024-08-08  7:10 ` [PATCH v2 04/36] soc: fsl: cpm1: tsa: Use BIT(), GENMASK() and FIELD_PREP() macros Herve Codina
2024-08-23  8:04   ` Christophe Leroy
2024-08-08  7:10 ` [PATCH v2 05/36] soc: fsl: cpm1: tsa: Fix blank line and spaces Herve Codina
2024-08-23  8:04   ` Christophe Leroy
2024-08-08  7:10 ` [PATCH v2 06/36] soc: fsl: cpm1: tsa: Add missing spinlock comment Herve Codina
2024-08-23  8:05   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 07/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) TSA controller Herve Codina
2024-08-13 19:01   ` Rob Herring (Arm)
2024-08-23  8:05   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 08/36] soc: fsl: cpm1: tsa: Remove unused registers offset definition Herve Codina
2024-08-23  8:05   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 09/36] soc: fsl: cpm1: tsa: Use ARRAY_SIZE() instead of hardcoded integer values Herve Codina
2024-08-23  8:05   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 10/36] soc: fsl: cpm1: tsa: Make SIRAM entries specific to CPM1 Herve Codina
2024-08-23  8:06   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 11/36] soc: fsl: cpm1: tsa: Introduce tsa_setup() and its CPM1 compatible version Herve Codina
2024-08-23  8:06   ` Christophe Leroy [this message]
2024-08-08  7:11 ` [PATCH v2 12/36] soc: fsl: cpm1: tsa: Isolate specific CPM1 part from tsa_serial_{dis}connect() Herve Codina
2024-08-23  8:07   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 13/36] soc: fsl: cpm1: tsa: Introduce tsa_version Herve Codina
2024-08-23  8:08   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 14/36] soc: fsl: cpm1: tsa: Add support for QUICC Engine (QE) implementation Herve Codina
2024-08-23  8:08   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 15/36] MAINTAINERS: Add QE files related to the Freescale TSA controller Herve Codina
2024-08-23  8:08   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 16/36] soc: fsl: cpm1: tsa: Introduce tsa_serial_get_num() Herve Codina
2024-08-23  8:09   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 17/36] soc: fsl: cpm1: qmc: Rename QMC_TSA_MASK Herve Codina
2024-08-23  8:09   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 18/36] soc: fsl: cpm1: qmc: Use BIT(), GENMASK() and FIELD_PREP() macros Herve Codina
2024-08-23  8:07   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 19/36] soc: fsl: cpm1: qmc: Fix blank line and spaces Herve Codina
2024-08-23  8:07   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 20/36] soc: fsl: cpm1: qmc: Remove unneeded parenthesis Herve Codina
2024-08-23  8:09   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 21/36] soc: fsl: cpm1: qmc: Fix 'transmiter' typo Herve Codina
2024-08-23  8:10   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 22/36] soc: fsl: cpm1: qmc: Add missing spinlock comment Herve Codina
2024-08-23  8:10   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 23/36] dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller Herve Codina
2024-08-13 19:12   ` Rob Herring
2024-08-23  8:11   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 24/36] soc: fsl: cpm1: qmc: Introduce qmc_data structure Herve Codina
2024-08-23  8:11   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 25/36] soc: fsl: cpm1: qmc: Re-order probe() operations Herve Codina
2024-08-23  8:11   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 26/36] soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version Herve Codina
2024-08-23  8:11   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 27/36] soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their " Herve Codina
2024-08-23  8:12   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 28/36] soc: fsl: cpm1: qmc: Rename qmc_chan_command() Herve Codina
2024-08-23  8:12   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 29/36] soc: fsl: cpm1: qmc: Handle RPACK initialization Herve Codina
2024-08-23  8:13   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 30/36] soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC Herve Codina
2024-08-23  8:13   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 31/36] soc: fsl: cpm1: qmc: Introduce qmc_version Herve Codina
2024-08-23  8:13   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 32/36] soc: fsl: qe: Add resource-managed muram allocators Herve Codina
2024-08-23  8:13   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 33/36] soc: fsl: qe: Add missing PUSHSCHED command Herve Codina
2024-08-23  8:14   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 34/36] soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation Herve Codina
2024-08-23  8:14   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 35/36] soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware Herve Codina
2024-08-23  8:14   ` Christophe Leroy
2024-08-08  7:11 ` [PATCH v2 36/36] MAINTAINERS: Add QE files related to the Freescale QMC controller Herve Codina
2024-08-23  8:15   ` Christophe Leroy
2024-09-03  8:44 ` [PATCH v2 00/36] soc: fsl: Add support for QUICC Engine TSA and QMC Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=280789e0-a018-432f-b208-e907add713ae@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=herve.codina@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=qiang.zhao@nxp.com \
    --cc=robh@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®