From: Filipe Manana <fdmanana@suse.com>
To: Boqun Feng <boqun.feng@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
peterz@infradead.org, Jan Kara <jack@suse.cz>,
David Sterba <dsterba@suse.com>,
Nikolay Borisov <nborisov@suse.com>
Subject: Re: possible lockdep regression introduced by 4d004099a668 ("lockdep: Fix lockdep recursion")
Date: Tue, 3 Nov 2020 19:44:29 +0000 [thread overview]
Message-ID: <283e8f43-91d1-7a19-ed9a-ac6cd13d41ce@suse.com> (raw)
In-Reply-To: <20201103140828.GA2713762@boqun-archlinux>
On 03/11/20 14:08, Boqun Feng wrote:
> Hi Filipe,
>
> On Mon, Oct 26, 2020 at 11:26:49AM +0000, Filipe Manana wrote:
>> Hello,
>>
>> I've recently started to hit a warning followed by tasks hanging after
>> attempts to freeze a filesystem. A git bisection pointed to the
>> following commit:
>>
>> commit 4d004099a668c41522242aa146a38cc4eb59cb1e
>> Author: Peter Zijlstra <peterz@infradead.org>
>> Date: Fri Oct 2 11:04:21 2020 +0200
>>
>> lockdep: Fix lockdep recursion
>>
>> This happens very reliably when running all xfstests with lockdep
>> enabled, and the tested filesystem is btrfs (haven't tried other
>> filesystems, but it shouldn't matter). The warning and task hangs always
>> happen at either test generic/068 or test generic/390, and (oddly)
>> always have to run all tests for it to trigger, running those tests
>> individually on an infinite loop doesn't seem to trigger it (at least
>> for a couple hours).
>>
>> The warning triggered is at fs/super.c:__sb_start_write() which always
>> results later in several tasks hanging on a percpu rw_sem:
>>
>> https://pastebin.com/qnLvf94E
>>
>
> In your dmesg, I see line:
>
> [ 9304.920151] INFO: lockdep is turned off.
>
> , that means debug_locks is 0, that usually happens when lockdep find a
> problem (i.e. a deadlock) and it turns itself off, because a problem is
> found and it's pointless for lockdep to continue to run.
>
> And I haven't found a lockdep splat in your dmesg, do you have a full
> dmesg so that I can have a look?
>
> This may be relevant because in commit 4d004099a66, we have
>
> @@ -5056,13 +5081,13 @@ noinstr int lock_is_held_type(const struct lockdep_map *lock, int read)
> unsigned long flags;
> int ret = 0;
>
> - if (unlikely(current->lockdep_recursion))
> + if (unlikely(!lockdep_enabled()))
> return 1; /* avoid false negative lockdep_assert_held() */
>
> before this commit lock_is_held_type() and its friends may return false
> if debug_locks==0, after this commit lock_is_held_type() and its friends
> will always return true if debug_locks == 0. That could cause the
> behavior here.
>
> In case I'm correct, the following "fix" may be helpful.
>
> Regards,
> Boqun
>
> ----------8
> diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
> index 3e99dfef8408..c0e27fb949ff 100644
> --- a/kernel/locking/lockdep.c
> +++ b/kernel/locking/lockdep.c
> @@ -5471,7 +5464,7 @@ noinstr int lock_is_held_type(const struct lockdep_map *lock, int read)
> unsigned long flags;
> int ret = 0;
>
> - if (unlikely(!lockdep_enabled()))
> + if (unlikely(debug_locks && !lockdep_enabled()))
> return 1; /* avoid false negative lockdep_assert_held() */
>
> raw_local_irq_save(flags);
Boqun, the patch fixes the problem for me!
You can have Tested-by: Filipe Manana <fdmanana@suse.com>
Thanks!
>
>
>
>> What happens is percpu_rwsem_is_held() is apparently returning a false
>> positive, so this makes __sb_start_write() do a
>> percpu_down_read_trylock() on a percpu_rw_sem at a higher level, which
>> is expected to always succeed, because if the calling task is holding a
>> freeze percpu_rw_sem at level 1, it's supposed to be able to try_lock
>> the semaphore at level 2, since the freeze semaphores are always
>> acquired by increasing level order.
>>
>> But the try_lock fails, it triggers the warning at __sb_start_write(),
>> then its caller sb_start_pagefault() ignores the return value and
>> callers such as btrfs_page_mkwrite() make the assumption the freeze
>> semaphore was taken, proceed to do their stuff, and later call
>> sb_end_pagefault(), which which will do an up_read() on the percpu_rwsem
>> at level 2 despite not having not been able to down_read() the
>> semaphore. This obviously corrupts the semaphore's read_count state, and
>> later causes any task trying to down_write() it to hang forever.
>>
>> After such a hang I ran a drgn script to confirm it:
>>
>> $ cat dump_freeze_sems.py
>> import sys
>> import drgn
>> from drgn import NULL, Object, cast, container_of, execscript, \
>> reinterpret, sizeof
>> from drgn.helpers.linux import *
>>
>> mnt_path = b'/home/fdmanana/btrfs-tests/scratch_1'
>>
>> mnt = None
>> for mnt in for_each_mount(prog, dst = mnt_path):
>> pass
>>
>> if mnt is None:
>> sys.stderr.write(f'Error: mount point {mnt_path} not found\n')
>> sys.exit(1)
>>
>> def dump_sem(level_enum):
>> level = level_enum.value_()
>> sem = mnt.mnt.mnt_sb.s_writers.rw_sem[level - 1]
>> print(f'freeze semaphore at level {level}, {str(level_enum)}')
>> print(f' block {sem.block.counter.value_()}')
>> for i in for_each_possible_cpu(prog):
>> read_count = per_cpu_ptr(sem.read_count, i)
>> print(f' read_count at cpu {i} = {read_count}')
>> print()
>>
>> # dump semaphore read counts for all freeze levels (fs.h)
>> dump_sem(prog['SB_FREEZE_WRITE'])
>> dump_sem(prog['SB_FREEZE_PAGEFAULT'])
>> dump_sem(prog['SB_FREEZE_FS'])
>>
>>
>> $ drgn dump_freeze_sems.py
>> freeze semaphore at level 1, (enum <anonymous>)SB_FREEZE_WRITE
>> block 1
>> read_count at cpu 0 = *(unsigned int *)0xffffc2ec3ee00c74 = 3
>> read_count at cpu 1 = *(unsigned int *)0xffffc2ec3f200c74 = 4294967293
>> read_count at cpu 2 = *(unsigned int *)0xffffc2ec3f600c74 = 3
>> read_count at cpu 3 = *(unsigned int *)0xffffc2ec3fa00c74 = 4294967293
>>
>> freeze semaphore at level 2, (enum <anonymous>)SB_FREEZE_PAGEFAULT
>> block 1
>> read_count at cpu 0 = *(unsigned int *)0xffffc2ec3ee00c78 = 0
>> read_count at cpu 1 = *(unsigned int *)0xffffc2ec3f200c78 = 4294967295
>> read_count at cpu 2 = *(unsigned int *)0xffffc2ec3f600c78 = 0
>> read_count at cpu 3 = *(unsigned int *)0xffffc2ec3fa00c78 = 0
>>
>> freeze semaphore at level 3, (enum <anonymous>)SB_FREEZE_FS
>> block 0
>> read_count at cpu 0 = *(unsigned int *)0xffffc2ec3ee00c7c = 0
>> read_count at cpu 1 = *(unsigned int *)0xffffc2ec3f200c7c = 0
>> read_count at cpu 2 = *(unsigned int *)0xffffc2ec3f600c7c = 0
>> read_count at cpu 3 = *(unsigned int *)0xffffc2ec3fa00c7c = 0
>>
>> At levels 1 and 3, read_count sums to 0, so it's fine, but at level 2 it
>> sums to -1. The system remains like that for hours at least, with no
>> progress at all.
>>
>> Is there a known regression with that lockdep commit?
>> Anything I can do to help debug it in case it's not obvious?
>>
>> Thanks.
>
next prev parent reply other threads:[~2020-11-03 19:44 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 11:26 Filipe Manana
2020-10-26 11:40 ` Peter Zijlstra
2020-10-26 11:55 ` Jan Kara
2020-10-26 11:59 ` Filipe Manana
2020-10-26 12:30 ` Peter Zijlstra
2020-10-26 11:56 ` Filipe Manana
2020-10-26 12:55 ` Peter Zijlstra
2020-10-26 13:06 ` Filipe Manana
2020-10-26 15:22 ` Peter Zijlstra
2020-10-27 9:49 ` Anatoly Pugachev
2020-10-31 11:30 ` [tip: locking/urgent] locking/lockdep: Remove more raw_cpu_read() usage tip-bot2 for Peter Zijlstra
2020-11-02 17:58 ` possible lockdep regression introduced by 4d004099a668 ("lockdep: Fix lockdep recursion") Filipe Manana
2020-11-03 10:15 ` Jan Kara
2020-11-03 10:22 ` Filipe Manana
2020-10-26 20:35 ` David Sterba
2020-11-03 14:08 ` Boqun Feng
2020-11-03 14:24 ` Filipe Manana
2020-11-03 19:44 ` Filipe Manana [this message]
2020-11-04 2:22 ` Boqun Feng
2020-11-04 3:44 ` Boqun Feng
2020-11-04 9:49 ` Filipe Manana
2020-11-04 19:54 ` Filipe Manana
2020-11-05 1:10 ` Boqun Feng
2020-11-09 8:44 ` Boqun Feng
2020-11-09 9:57 ` Filipe Manana
2020-11-10 1:41 ` Boqun Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=283e8f43-91d1-7a19-ed9a-ac6cd13d41ce@suse.com \
--to=fdmanana@suse.com \
--cc=boqun.feng@gmail.com \
--cc=dsterba@suse.com \
--cc=jack@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=nborisov@suse.com \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®