From: "Joe Gofton" <jgofton@danicar.net>
To: <linux-kernel@vger.kernel.org>
Subject: Adaptec scsi issue kernel 2.4.19/20
Date: Mon, 27 Jan 2003 13:47:07 -0400 (AST) [thread overview]
Message-ID: <28774.207.34.24.8.1043689627.squirrel@www.danicar.net> (raw)
I am having an issue with my scsi card. Here is some info.
jgofton@ns1:/var/log$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:08.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP
(rev 5c)
00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
00:0a.1 Input device controller: Creative Labs SB Live! (rev 01)
00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 20)
00:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 64)
This is what shows in the messages.log file: 2.4.20
Dec 1 11:10:32 ns1 kernel: SCSI subsystem driver Revision: 1.00
Dec 1 11:10:32 ns1 kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
DRIVER, Rev 6.2.8
Dec 1 11:10:32 ns1 kernel: <Adaptec 2940 Ultra2 SCSI adapter>
Dec 1 11:10:32 ns1 kernel: aic7890/91: Ultra2 Wide Channel A,
SCSI Id=7, 32/253 SCBs
Dec 1 11:10:32 ns1 kernel:
Dec 1 11:10:32 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:10:32 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:10:32 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:10:32 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:10:32 ns1 kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Dec 1 11:10:32 ns1 kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Dec 1 11:10:32 ns1 kernel: scsi: <fdomain> Detection failed (no card)
Dec 1 11:10:32 ns1 kernel: PCI: Enabling device 00:09.0 (0006 -> 0007)
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
Dec 1 11:10:32 ns1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Dec 1 11:10:32 ns1 kernel: scsi0: Signaled a Target Abort
and this is one that works. 2.4.18:
Dec 1 11:16:16 ns1 kernel: SCSI subsystem driver Revision: 1.00
Dec 1 11:16:16 ns1 kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA
DRIVER, Rev 6.2.4
Dec 1 11:16:16 ns1 kernel: <Adaptec 2940 Ultra2 SCSI adapter>
Dec 1 11:16:16 ns1 kernel: aic7890/91: Ultra2 Wide Channel A,
SCSI Id=7, 32/253 SCBs
Dec 1 11:16:16 ns1 kernel:
Dec 1 11:16:16 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:16:16 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:16:16 ns1 kernel: Vendor: QUANTUM Model: ATLAS_V_18_WLS
Rev: 0230
Dec 1 11:16:16 ns1 kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 1 11:16:16 ns1 kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Dec 1 11:16:16 ns1 kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Dec 1 11:16:16 ns1 kernel: scsi: <fdomain> Detection failed (no card)
Dec 1 11:16:16 ns1 kernel: PCI: Enabling device 00:09.0 (0006 -> 0007)
Dec 1 11:16:16 ns1 kernel: Attached scsi disk sda at scsi0, channel 0, id
0, lun 0
Dec 1 11:16:16 ns1 kernel: Attached scsi disk sdb at scsi0, channel 0, id
1, lun 0
Dec 1 11:16:16 ns1 kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz,
offset 63, 16bit)
Dec 1 11:16:16 ns1 kernel: SCSI device sda: 35861388 512-byte hdwr
sectors (18361 MB)
Dec 1 11:16:16 ns1 kernel: Partition check:
Dec 1 11:16:16 ns1 kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Dec 1 11:16:16 ns1 kernel: (scsi0:A:1): 80.000MB/s transfers (40.000MHz,
offset 63, 16bit)
Dec 1 11:16:16 ns1 kernel: SCSI device sdb: 35861388 512-byte hdwr
sectors (18361 MB)
Dec 1 11:16:16 ns1 kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
Is there a known problem and is there a fix? I can't seem to upgrade my
kernel without scsi issues.
--
Joe
***
I can only please one person a day.
Today is not your day and tomorrow doesn't look good either.
***
next reply other threads:[~2003-01-27 17:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-27 17:47 Joe Gofton [this message]
2003-01-27 17:55 ` John Bradford
2003-01-29 16:14 Joe Gofton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28774.207.34.24.8.1043689627.squirrel@www.danicar.net \
--to=jgofton@danicar.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®