mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexander Gordeev <agordeev@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Alexander Gordeev <agordeev@redhat.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Michael Ellerman <michael@ellerman.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Tejun Heo <tj@kernel.org>,
	Ben Hutchings <bhutchings@solarflare.com>,
	David Laight <David.Laight@ACULAB.COM>,
	Mark Lord <kernel@start.ca>, "H. Peter Anvin" <hpa@zytor.com>,
	linux-pci@vger.kernel.org
Subject: [PATCH v3 08/11] PCI/MSI: Factor out pci_get_msi_cap() interface
Date: Tue, 26 Nov 2013 10:09:57 +0100	[thread overview]
Message-ID: <28840beabf04db10ea555dc15033eaeb8a226231.1385399393.git.agordeev@redhat.com> (raw)
In-Reply-To: <cover.1385399393.git.agordeev@redhat.com>

Device drivers can use this interface to obtain maximum number
of MSI interrupts the device supports and use that number i.e.
in a following call to pci_enable_msi_block() interface.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
---
 Documentation/PCI/MSI-HOWTO.txt |   15 ++++++++++++++
 drivers/pci/msi.c               |   41 +++++++++++++++++++++++++++++++-------
 include/linux/pci.h             |    6 +++++
 3 files changed, 54 insertions(+), 8 deletions(-)

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index a4d174e..9c1282e 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -169,6 +169,21 @@ on any interrupt for which it previously called request_irq().
 Failure to do so results in a BUG_ON(), leaving the device with
 MSI enabled and thus leaking its vector.
 
+4.2.5 pci_get_msi_cap
+
+int pci_get_msi_cap(struct pci_dev *dev)
+
+This function could be used to retrieve the number of MSI vectors the
+device requested (via the Multiple Message Capable register). The MSI
+specification only allows the returned value to be a power of two,
+up to a maximum of 2^5 (32).
+
+If this function returns a negative number, it indicates the device is
+not capable of sending MSIs.
+
+If this function returns a positive number, it indicates the maximum
+number of MSI interrupt vectors that could be allocated.
+
 4.3 Using MSI-X
 
 The MSI-X capability is much more flexible than the MSI capability.
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 4656b88..3558b45 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -823,6 +823,31 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
 }
 
 /**
+ * pci_get_msi_cap - Return the number of MSI vectors device is capable to send
+ * @dev: device to report about
+ *
+ * This function returns the number of MSI vectors a device requested via
+ * Multiple Message Capable register. It returns a negative errno if the
+ * device is not capable sending MSI interrupts. Otherwise, the call succeeds
+ * and returns a power of two, up to a maximum of 2^5 (32), according to the
+ * MSI specification.
+ **/
+int pci_get_msi_cap(struct pci_dev *dev)
+{
+	int ret;
+	u16 msgctl;
+
+	if (!dev->msi_cap)
+		return -EINVAL;
+
+	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
+	ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+
+	return ret;
+}
+EXPORT_SYMBOL(pci_get_msi_cap);
+
+/**
  * pci_enable_msi_block - configure device's MSI capability structure
  * @dev: device to configure
  * @nvec: number of interrupts to configure
@@ -838,13 +863,13 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
 int pci_enable_msi_block(struct pci_dev *dev, int nvec)
 {
 	int status, maxvec;
-	u16 msgctl;
 
-	if (!dev->msi_cap || dev->current_state != PCI_D0)
+	if (dev->current_state != PCI_D0)
 		return -EINVAL;
 
-	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
-	maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+	maxvec = pci_get_msi_cap(dev);
+	if (maxvec < 0)
+		return maxvec;
 	if (nvec > maxvec)
 		return maxvec;
 
@@ -869,13 +894,13 @@ EXPORT_SYMBOL(pci_enable_msi_block);
 int pci_enable_msi_block_auto(struct pci_dev *dev, int *maxvec)
 {
 	int ret, nvec;
-	u16 msgctl;
 
-	if (!dev->msi_cap || dev->current_state != PCI_D0)
+	if (dev->current_state != PCI_D0)
 		return -EINVAL;
 
-	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
-	ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+	ret = pci_get_msi_cap(dev);
+	if (ret < 0)
+		return ret;
 
 	if (maxvec)
 		*maxvec = ret;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6ba0deb..e337086 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1155,6 +1155,11 @@ struct msix_entry {
 
 
 #ifndef CONFIG_PCI_MSI
+static inline int pci_get_msi_cap(struct pci_dev *dev)
+{
+	return -ENOSYS;
+}
+
 static inline int pci_enable_msi_block(struct pci_dev *dev, int nvec)
 {
 	return -ENOSYS;
@@ -1196,6 +1201,7 @@ static inline int pci_msi_enabled(void)
 	return 0;
 }
 #else
+int pci_get_msi_cap(struct pci_dev *dev);
 int pci_enable_msi_block(struct pci_dev *dev, int nvec);
 int pci_enable_msi_block_auto(struct pci_dev *dev, int *maxvec);
 void pci_msi_shutdown(struct pci_dev *dev);
-- 
1.7.7.6


  parent reply	other threads:[~2013-11-26 20:56 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-26  9:09 [PATCH v3 00/11] Introduce pcim_enable_msi*() family helpers Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 01/11] PCI/MSI/s390: Fix single MSI only check Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 02/11] PCI/MSI/s390: Remove superfluous check of MSI type Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 03/11] PCI/MSI/pSeries: Fix wrong error code reporting Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 04/11] PCI/MSI/pSeries: Make quota traversing and requesting race-safe Alexander Gordeev
2013-12-10 22:30   ` Bjorn Helgaas
2013-12-13 10:29     ` Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 05/11] PCI/MSI: Fix return value when populate_msi_sysfs() failed Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 06/11] PCI/MSI: Return -ENOSYS for unimplemented interfaces, not -1 Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 07/11] PCI/MSI: Make pci_enable_msi/msix() 'nvec' argument type as int Alexander Gordeev
2013-11-26 20:58   ` Tejun Heo
2013-11-26  9:09 ` Alexander Gordeev [this message]
2013-11-26  9:09 ` [PATCH v3 09/11] PCI/MSI: Get rid of pci_enable_msi_block_auto() interface Alexander Gordeev
2013-11-26  9:09 ` [PATCH v3 10/11] PCI/MSI: Convert pci_msix_table_size() to a public interface Alexander Gordeev
2013-12-10 23:08   ` Bjorn Helgaas
2013-12-12 16:06     ` Alexander Gordeev
2013-12-12 21:16       ` Bjorn Helgaas
2013-11-26  9:10 ` [PATCH v3 11/11] PCI/MSI: Introduce pcim_enable_msi*() family helpers Alexander Gordeev
2013-12-10 23:16   ` Bjorn Helgaas
2013-12-12 16:11     ` Alexander Gordeev
2013-12-12 16:11       ` Tejun Heo
2013-12-12 21:16         ` Bjorn Helgaas
2013-11-26 21:00 ` [PATCH v3 00/11] " Tejun Heo
2013-12-06  8:39 ` Alexander Gordeev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28840beabf04db10ea555dc15033eaeb8a226231.1385399393.git.agordeev@redhat.com \
    --to=agordeev@redhat.com \
    --cc=David.Laight@ACULAB.COM \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=bhutchings@solarflare.com \
    --cc=hpa@zytor.com \
    --cc=kernel@start.ca \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=michael@ellerman.id.au \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®