From: Geraldo Nascimento <geraldogabriel@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: "Shawn Lin" <shawn.lin@rock-chips.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Heiko Stuebner" <heiko@sntech.de>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
linux-phy@lists.infradead.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH v2 1/4] PCI: pcie-rockchip: add Link Control and Status Register 2
Date: Tue, 10 Jun 2025 18:19:49 -0300 [thread overview]
Message-ID: <28ae3286f3217881ae6ea3aecad47ae4567d6ec7.1749588810.git.geraldogabriel@gmail.com> (raw)
In-Reply-To: <cover.1749588810.git.geraldogabriel@gmail.com>
Link Control and Status Register 2 is not present in current
pcie-rockchip.h definitions. Add it in preparation for
setting it before Gen2 retraining.
While at it, also reference other registers from offset at
Capabilities Register through standard PCI definitions. Only
RC registers have been touched, although in principle there's
no functional change.
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
---
drivers/pci/controller/pcie-rockchip.h | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pcie-rockchip.h b/drivers/pci/controller/pcie-rockchip.h
index 5864a20323f2..90d98aa8830e 100644
--- a/drivers/pci/controller/pcie-rockchip.h
+++ b/drivers/pci/controller/pcie-rockchip.h
@@ -155,17 +155,19 @@
#define PCIE_EP_CONFIG_DID_VID (PCIE_EP_CONFIG_BASE + 0x00)
#define PCIE_EP_CONFIG_LCS (PCIE_EP_CONFIG_BASE + 0xd0)
#define PCIE_RC_CONFIG_RID_CCR (PCIE_RC_CONFIG_BASE + 0x08)
-#define PCIE_RC_CONFIG_DCR (PCIE_RC_CONFIG_BASE + 0xc4)
+#define PCIE_RC_CONFIG_CR (PCIE_RC_CONFIG_BASE + 0xc0)
+#define PCIE_RC_CONFIG_DCR (PCIE_RC_CONFIG_CR + PCI_EXP_DEVCAP)
#define PCIE_RC_CONFIG_DCR_CSPL_SHIFT 18
#define PCIE_RC_CONFIG_DCR_CSPL_LIMIT 0xff
#define PCIE_RC_CONFIG_DCR_CPLS_SHIFT 26
-#define PCIE_RC_CONFIG_DCSR (PCIE_RC_CONFIG_BASE + 0xc8)
+#define PCIE_RC_CONFIG_DCSR (PCIE_RC_CONFIG_CR + PCI_EXP_DEVCTL)
#define PCIE_RC_CONFIG_DCSR_MPS_MASK GENMASK(7, 5)
#define PCIE_RC_CONFIG_DCSR_MPS_256 (0x1 << 5)
-#define PCIE_RC_CONFIG_LINK_CAP (PCIE_RC_CONFIG_BASE + 0xcc)
+#define PCIE_RC_CONFIG_LINK_CAP (PCIE_RC_CONFIG_CR + PCI_EXP_LNKCAP)
#define PCIE_RC_CONFIG_LINK_CAP_L0S BIT(10)
-#define PCIE_RC_CONFIG_LCS (PCIE_RC_CONFIG_BASE + 0xd0)
+#define PCIE_RC_CONFIG_LCS (PCIE_RC_CONFIG_CR + PCI_EXP_LNKCTL)
#define PCIE_EP_CONFIG_LCS (PCIE_EP_CONFIG_BASE + 0xd0)
+#define PCIE_RC_CONFIG_LCS_2 (PCIE_RC_CONFIG_CR + PCI_EXP_LNKCTL2)
#define PCIE_RC_CONFIG_L1_SUBSTATE_CTRL2 (PCIE_RC_CONFIG_BASE + 0x90c)
#define PCIE_RC_CONFIG_THP_CAP (PCIE_RC_CONFIG_BASE + 0x274)
#define PCIE_RC_CONFIG_THP_CAP_NEXT_MASK GENMASK(31, 20)
--
2.49.0
next prev parent reply other threads:[~2025-06-10 21:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 21:19 [RFC PATCH v2 0/4] Quality Improvements for Rockchip-IP PCIe Geraldo Nascimento
2025-06-10 21:19 ` Geraldo Nascimento [this message]
2025-06-11 19:42 ` [RFC PATCH v2 1/4] PCI: pcie-rockchip: add Link Control and Status Register 2 Bjorn Helgaas
2025-06-12 0:48 ` Geraldo Nascimento
2025-06-12 20:49 ` Geraldo Nascimento
2025-06-12 21:26 ` Bjorn Helgaas
2025-06-10 21:20 ` [RFC PATCH v2 2/4] PCI: rockchip-host: Set Target Link Speed before retraining Geraldo Nascimento
2025-06-10 21:20 ` [RFC PATCH v2 3/4] phy: rockchip-pcie: enable all four lanes Geraldo Nascimento
2025-06-10 21:25 ` [RFC PATCH v2 4/4] phy: rockchip-pcie: adjust read mask and write strobe disable Geraldo Nascimento
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28ae3286f3217881ae6ea3aecad47ae4567d6ec7.1749588810.git.geraldogabriel@gmail.com \
--to=geraldogabriel@gmail.com \
--cc=bhelgaas@google.com \
--cc=heiko@sntech.de \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®