Re: [PATCH] ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone

[Faiz Abbas <faiz_abbas@ti.com>]

Hi,

On Monday 02 July 2018 04:20 PM, Tony Lindgren wrote:
> * Robert Nelson <robertcnelson@gmail.com> [180618 14:00]:
>> On Wed, Apr 11, 2018 at 6:48 AM, Faiz Abbas <faiz_abbas@ti.com> wrote:
>>> am335x-evm, am335x-evmsk and am335x-beaglebone are currently relying on
>>> pinmux set by the bootloader to set the correct value for mmc1. Fix
>>> this by adding pinmux data for the same in kernel.
>>>
>>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>>> ---
>>>  arch/arm/boot/dts/am335x-bone-common.dtsi | 9 ++++++++-
>>>  arch/arm/boot/dts/am335x-evm.dts          | 9 ++++++++-
>>>  arch/arm/boot/dts/am335x-evmsk.dts        | 9 ++++++++-
>>>  3 files changed, 24 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
>>> index e67b4d6..f9e8667 100644
>>> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
>>> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
>>> @@ -161,7 +161,14 @@
>>>
>>>         mmc1_pins: pinmux_mmc1_pins {
>>>                 pinctrl-single,pins = <
>>> -                       AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
>>> +                       AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)              /* spio0_cs1.gpio0_6 */
>>> +                       AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat0.mmc0_dat0 */
>>> +                       AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat1.mmc0_dat1 */
>>> +                       AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat2.mmc0_dat2 */
>>> +                       AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_dat3.mmc0_dat3 */
>>> +                       AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_cmd.mmc0_cmd */
>>> +                       AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)       /* mmc0_clk.mmc0_clk */
>>> +                       AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4)              /* mcasp0_aclkr.mmc0_sdwp */
>>
>> We went one pin too far on the Beagle's here:
>>
>> 0x9a0 ( mcasp0_aclkr.mmc0_sdwp ) = Routed to P9_42, (muxed with C18,
>> to a shared pin on the header), so not connected to the microSD
>> socket...
>>
>> https://github.com/beagleboard/beaglebone-black/blob/master/BBB_SCH.pdf
>>
>> Looking at this evm schematic, it looks like 0x9a0 should be removed
>> too, but I'm not sure on all revisions:
>>
>> http://processors.wiki.ti.com/images/a/a2/TMDSSK3358_3H0009_REV1_2B_SCH.pdf
> 
> Hmm care to post a fix for this?
> 

Apologies for not replying here earlier.

You're right. The sdwp pin needs to be removed from bone and evm sk. It
needs to stay only for gp evm. Looks like this needs to be fixed for
bone in U-boot also.

Thanks,
Faiz