From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262078AbUKPSBN (ORCPT ); Tue, 16 Nov 2004 13:01:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262084AbUKPSBM (ORCPT ); Tue, 16 Nov 2004 13:01:12 -0500 Received: from fidel.freesurf.fr ([212.43.206.16]:62610 "EHLO fidel.freesurf.fr") by vger.kernel.org with ESMTP id S262078AbUKPSAQ (ORCPT ); Tue, 16 Nov 2004 13:00:16 -0500 Message-ID: <29367.134.214.201.98.1100628015.squirrel@jose.freesurf.fr> Date: Tue, 16 Nov 2004 19:00:15 +0100 (CET) Subject: [bug]Broken driver for a SK nic From: To: X-Priority: 3 Importance: Normal X-MSMail-Priority: Normal X-Mailer: SquirrelMail (version 1.2.5) MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello I bought a new box with a 64bits proc (Athlon) 512Mo of RAM and so on I use a 2.6.9rc1 (the most recent I found (in a mag) without ANY internet connection)under sourcemage So my nic is: #dmesg | grep eth0 eth0: Yukon Gigabit Ethernet 10/10/1000Base-T Adaptater I must use the sk98lin module which is integrated to the kernel well easy. I recompile the kernel and I modprobe the module: #modprobe sk98lin ACPI: PCI interrupt 0000:02:00.0[A] ->GSI 11 (level, low) ->IRQ11 ACPI: PCI interrupt 0000:02:00.0[A] ->GSI 11 (level, low) ->IRQ11 eth0: --ERROR-- Class: internal software error Nr: 0x1ae Msg: General: Driver release date not initialized eth0: --ERROR-- Class: internal software error Nr: 0x1ae Msg: General: Driver release date not initialized eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adaptater PrefPort:A RlmtMode: check Link State dhcpcd[2875]: dhcpStart: retrying MAC address request (returned 00:00:00:00:00:00) eth0: network connection is up #là gros sourire :D speed:100 autonegotiation: yes duplex mode: full flowctrl:symmetric irq moderation: disabled scatter-gather: enabled ASSERT net/ipv4/netfilter/ip_nat_helper.c:428 &ip_nat_lock write locked I've got this and the pc freeze does anyone get a clue about what goes wrong? Thx