From: Alex Elder <elder@riscstar.com>
To: sboyd@kernel.org, bmasney+clk@redhat.com,
jbrunet+clk@baylibre.com, p.zabel@pengutronix.de,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: daniel@riscstar.com, mohd.anwar@oss.qualcomm.com,
lorenzo.bianconi@oss.qualcomm.com, fabrice.gasnier@foss.st.com,
alexandre.torgue@foss.st.com, marex@nabladev.com,
changhuang.liang@starfivetech.com, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/2] clk: tc9564: introduce a clock and reset driver
Date: Fri, 20 Nov 2026 13:04:28 -0600 [thread overview]
Message-ID: <295d75b9-b346-4669-8c1c-397df433b699@riscstar.com> (raw)
In-Reply-To: <20261120183212.1264522-1-elder@riscstar.com>
On 11/20/26 12:32 PM, Alex Elder wrote:
> This code has gone around and around in various forms, having been
> included most recently in a series that also added a system controller
> driver. That system controller has now been removed.
>
> This series introduces a devicetree binding and single driver to support
> the clock and reset components present within the Toshiba TC9564 chip.
>
> The Toshiba TC9564 is an SoC that attaches to a host system via PCIe.
> It includes a PCIe switch with three downstream ports. To one of
> these ports an embedded PCIe endpoint is attached, and that implements
> two PCI functions. BAR 4 for both PCI functions provides access to
> registers controlling blocks within the SoC, including the clock and
> resets controllers supported by this series.
>
> To avoid any confusion I'm only going to refer back to the "syscon"
> series", which provides some additional information including links
> to earlier versions of this code.
>
> -Alex
If anyone would like to see the DTS file that uses this clock
and reset functionality, it's available here:
https://github.com/riscstar/linux/commit/de0515ee2967d8ff7753cc179a8e05283ee62829
-Alex
>
> The previous version of this code was included in this series:
> https://lore.kernel.org/all/20261104004332.2141282-1-elder@riscstar.com/
>
> Between that series (v1) and this one (v2):
> - There is no more syscon, so its devicetree binding and driver have
> been dropped
> - The clock and reset components now have a single devicetree binding
> - We no longer use a syscon-generated regmap for accessing the common
> range of memory used by multiple drivers; specific sub-ranges are
> instead mapped
> - The clock and reset drivers have been combined into a single driver
> located under drivers/clk
> - The config option for the driver includes COMPILE_TEST, as requested
> (last month) by Jerome Brunet
> - The help text for the config option is simplified, first suggested
> by Philipp Zabel
> - The driver now names clocks using dev_name() rather than trying to
> hand-code a unique name into a fixed-size name array (also suggested
> by Jerome)
> - Certain functions now always return 0, which simplifies callers
> so they can simply return what the called function returns
> - As suggested by sashiko, a counted-by field in a flex array is now
> assigned explicitly
>
> Alex Elder (2):
> dt-bindings: toshiba: introduce toshiba,tc9564-clock.yaml
> clk: toshiba: introduce a TC9564 clock/reset driver
>
> .../bindings/clock/toshiba,tc9564-clock.yaml | 73 +++
> MAINTAINERS | 9 +
> drivers/clk/Kconfig | 8 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-tc9564.c | 501 ++++++++++++++++++
> include/dt-bindings/clock/toshiba,tc9564.h | 50 ++
> 6 files changed, 642 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/toshiba,tc9564-clock.yaml
> create mode 100644 drivers/clk/clk-tc9564.c
> create mode 100644 include/dt-bindings/clock/toshiba,tc9564.h
>
>
> base-commit: 909ef7a9a30fa139e69e555e3606680f5cca7726
prev parent reply other threads:[~2026-11-20 19:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 18:32 Alex Elder
2026-11-20 18:32 ` [PATCH v2 1/2] dt-bindings: toshiba: introduce toshiba,tc9564-clock.yaml Alex Elder
2026-11-20 18:32 ` [PATCH v2 2/2] clk: toshiba: introduce a TC9564 clock/reset driver Alex Elder
2026-11-20 19:04 ` Alex Elder [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=295d75b9-b346-4669-8c1c-397df433b699@riscstar.com \
--to=elder@riscstar.com \
--cc=alexandre.torgue@foss.st.com \
--cc=bmasney+clk@redhat.com \
--cc=changhuang.liang@starfivetech.com \
--cc=conor+dt@kernel.org \
--cc=daniel@riscstar.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrice.gasnier@foss.st.com \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.bianconi@oss.qualcomm.com \
--cc=marex@nabladev.com \
--cc=mohd.anwar@oss.qualcomm.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®