mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Roman Jordan" <RomanJordan@gmx.de>
To: linux-kernel@vger.kernel.org
Subject: kernel panic after reboot
Date: Wed, 11 Feb 2004 15:30:10 +0100 (MET)	[thread overview]
Message-ID: <29653.1076509810@www26.gmx.net> (raw)

Hi,
i have an absolut strange behaviour. I use suse kernel 2.4.18 and a VIA
based motherboard. There is one HD which is a part of a software raid in the
system. I start the system with only one disk from this array. The raid driver
notices that there is only one disk and the system starts. I can repeat this as
often i want.
But if i change the motherboard (which should be the same type) i can only
boot one time. The second boot will result in the following message:

kernel panic: Unable to mount root fs 9:00

Some time before i got: Unable to read superblock

The result is, that the kernel can't access any partition (the same error
message for all partitions). If i insert the "wrong" disk into an other linux
pc, i can't mount it. I got the same message about invalid superblocks.
I can repeat this behaviour. The result is always the same.

The only visible differences between this two boards are the BIOS Version
and the southbridge VT82C686 chip identifier. I have swapped the bios chips
between the two boards, but nothing changes.
The identifier of the via VT82C686 chip on the running board is 13C7K2674
and on the "strange" board it is 13C7K2676 (newer type).

If i use a second board of the newer type (chip id 13C7K2676) the same error
occurs. At the moment all boards using the VT82C686 - 13C7K2676 chip
destroys the partition on the hard disk.

Any ideas?

Best regards,
Roman Jordan

-- 
GMX ProMail (250 MB Mailbox, 50 FreeSMS, Virenschutz, 2,99 EUR/Monat...)
jetzt 3 Monate GRATIS + 3x DER SPIEGEL +++ http://www.gmx.net/derspiegel +++


                 reply	other threads:[~2004-02-11 14:30 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=29653.1076509810@www26.gmx.net \
    --to=romanjordan@gmx.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®